The Nickel Aluminide Coatings Obtained on Small Holes Produced with the EDD Method

648 Ogledov
803 Prenosov
Izvoz citacije: ABNT
TRAJER, Marcin ;PYCLIK, Łukasz ; SOBIECKI, Jerzy Robert .
The Nickel Aluminide Coatings Obtained on Small Holes Produced with the EDD Method. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 68, n.10, p. 623-634, june 2022. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/the-nickel-aluminide-coatings-obtained-on-small-holes-produced-by-edd-method/>. Date accessed: 20 may. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2022.169.
Trajer, M., Pyclik, ., &  Sobiecki, J.
(2022).
The Nickel Aluminide Coatings Obtained on Small Holes Produced with the EDD Method.
Strojniški vestnik - Journal of Mechanical Engineering, 68(10), 623-634.
doi:http://dx.doi.org/10.5545/sv-jme.2022.169
@article{sv-jmesv-jme.2022.169,
	author = {Marcin  Trajer and Łukasz  Pyclik and Jerzy Robert   Sobiecki},
	title = {The Nickel Aluminide Coatings Obtained on Small Holes Produced with the EDD Method},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {68},
	number = {10},
	year = {2022},
	keywords = {EDD method; nickel aluminide; turbine blade; durability; jet engine; },
	abstract = {Recently, airplane travel has become more affordable and thus more common. This has required engineers and scientists to spend thousands of hours on the development of new material and production technologies. High-pressure turbine (HPT) components are the most heavily loaded parts from the thermal, mechanical, and corrosion points of view. Therefore, both the material from which blades and vanes are cast as well as protective coatings are being constantly developed. Better material translates into longer and safer engine operation. Coatings maintain material structures within aggressive environments. However, despite the wide scope of development, there are areas that have not been investigated, one of which is electro-discharge drilling (EDD) machined cooling holes surface and its influence on environmental coating durability. In this paper, the EDD process impact on coating durability is shown. Process residuals, such as redeposited material and recast layers, result in coating inclusions. Oxidation testing also shows the relationship between the cooling hole diameter and coating durability.},
	issn = {0039-2480},	pages = {623-634},	doi = {10.5545/sv-jme.2022.169},
	url = {https://www.sv-jme.eu/sl/article/the-nickel-aluminide-coatings-obtained-on-small-holes-produced-by-edd-method/}
}
Trajer, M.,Pyclik, ., Sobiecki, J.
2022 June 68. The Nickel Aluminide Coatings Obtained on Small Holes Produced with the EDD Method. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 68:10
%A Trajer, Marcin 
%A Pyclik, Łukasz 
%A  Sobiecki, Jerzy Robert 
%D 2022
%T The Nickel Aluminide Coatings Obtained on Small Holes Produced with the EDD Method
%B 2022
%9 EDD method; nickel aluminide; turbine blade; durability; jet engine; 
%! The Nickel Aluminide Coatings Obtained on Small Holes Produced with the EDD Method
%K EDD method; nickel aluminide; turbine blade; durability; jet engine; 
%X Recently, airplane travel has become more affordable and thus more common. This has required engineers and scientists to spend thousands of hours on the development of new material and production technologies. High-pressure turbine (HPT) components are the most heavily loaded parts from the thermal, mechanical, and corrosion points of view. Therefore, both the material from which blades and vanes are cast as well as protective coatings are being constantly developed. Better material translates into longer and safer engine operation. Coatings maintain material structures within aggressive environments. However, despite the wide scope of development, there are areas that have not been investigated, one of which is electro-discharge drilling (EDD) machined cooling holes surface and its influence on environmental coating durability. In this paper, the EDD process impact on coating durability is shown. Process residuals, such as redeposited material and recast layers, result in coating inclusions. Oxidation testing also shows the relationship between the cooling hole diameter and coating durability.
%U https://www.sv-jme.eu/sl/article/the-nickel-aluminide-coatings-obtained-on-small-holes-produced-by-edd-method/
%0 Journal Article
%R 10.5545/sv-jme.2022.169
%& 623
%P 12
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 68
%N 10
%@ 0039-2480
%8 2022-06-23
%7 2022-06-23
Trajer, Marcin, Łukasz  Pyclik, & Jerzy Robert   Sobiecki.
"The Nickel Aluminide Coatings Obtained on Small Holes Produced with the EDD Method." Strojniški vestnik - Journal of Mechanical Engineering [Online], 68.10 (2022): 623-634. Web.  20 May. 2024
TY  - JOUR
AU  - Trajer, Marcin 
AU  - Pyclik, Łukasz 
AU  -  Sobiecki, Jerzy Robert 
PY  - 2022
TI  - The Nickel Aluminide Coatings Obtained on Small Holes Produced with the EDD Method
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2022.169
KW  - EDD method; nickel aluminide; turbine blade; durability; jet engine; 
N2  - Recently, airplane travel has become more affordable and thus more common. This has required engineers and scientists to spend thousands of hours on the development of new material and production technologies. High-pressure turbine (HPT) components are the most heavily loaded parts from the thermal, mechanical, and corrosion points of view. Therefore, both the material from which blades and vanes are cast as well as protective coatings are being constantly developed. Better material translates into longer and safer engine operation. Coatings maintain material structures within aggressive environments. However, despite the wide scope of development, there are areas that have not been investigated, one of which is electro-discharge drilling (EDD) machined cooling holes surface and its influence on environmental coating durability. In this paper, the EDD process impact on coating durability is shown. Process residuals, such as redeposited material and recast layers, result in coating inclusions. Oxidation testing also shows the relationship between the cooling hole diameter and coating durability.
UR  - https://www.sv-jme.eu/sl/article/the-nickel-aluminide-coatings-obtained-on-small-holes-produced-by-edd-method/
@article{{sv-jme}{sv-jme.2022.169},
	author = {Trajer, M., Pyclik, .,  Sobiecki, J.},
	title = {The Nickel Aluminide Coatings Obtained on Small Holes Produced with the EDD Method},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {68},
	number = {10},
	year = {2022},
	doi = {10.5545/sv-jme.2022.169},
	url = {https://www.sv-jme.eu/sl/article/the-nickel-aluminide-coatings-obtained-on-small-holes-produced-by-edd-method/}
}
TY  - JOUR
AU  - Trajer, Marcin 
AU  - Pyclik, Łukasz 
AU  -  Sobiecki, Jerzy Robert 
PY  - 2022/06/23
TI  - The Nickel Aluminide Coatings Obtained on Small Holes Produced with the EDD Method
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 68, No 10 (2022): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2022.169
KW  - EDD method, nickel aluminide, turbine blade, durability, jet engine, 
N2  - Recently, airplane travel has become more affordable and thus more common. This has required engineers and scientists to spend thousands of hours on the development of new material and production technologies. High-pressure turbine (HPT) components are the most heavily loaded parts from the thermal, mechanical, and corrosion points of view. Therefore, both the material from which blades and vanes are cast as well as protective coatings are being constantly developed. Better material translates into longer and safer engine operation. Coatings maintain material structures within aggressive environments. However, despite the wide scope of development, there are areas that have not been investigated, one of which is electro-discharge drilling (EDD) machined cooling holes surface and its influence on environmental coating durability. In this paper, the EDD process impact on coating durability is shown. Process residuals, such as redeposited material and recast layers, result in coating inclusions. Oxidation testing also shows the relationship between the cooling hole diameter and coating durability.
UR  - https://www.sv-jme.eu/sl/article/the-nickel-aluminide-coatings-obtained-on-small-holes-produced-by-edd-method/
Trajer, Marcin, Pyclik, Łukasz, AND  Sobiecki, Jerzy Robert.
"The Nickel Aluminide Coatings Obtained on Small Holes Produced with the EDD Method" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 68 Number 10 (23 June 2022)

Avtorji

Inštitucije

  • Warsaw University of Technology, Faculty of Material Science and Engineering, Poland 1
  • Silesian University of Technology, Faculty of Materials Engineering, Poland 2

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 68(2022)10, 623-634
© The Authors 2022. CC BY 4.0 Int.

https://doi.org/10.5545/sv-jme.2022.169

Recently, airplane travel has become more affordable and thus more common. This has required engineers and scientists to spend thousands of hours on the development of new material and production technologies. High-pressure turbine (HPT) components are the most heavily loaded parts from the thermal, mechanical, and corrosion points of view. Therefore, both the material from which blades and vanes are cast as well as protective coatings are being constantly developed. Better material translates into longer and safer engine operation. Coatings maintain material structures within aggressive environments. However, despite the wide scope of development, there are areas that have not been investigated, one of which is electro-discharge drilling (EDD) machined cooling holes surface and its influence on environmental coating durability. In this paper, the EDD process impact on coating durability is shown. Process residuals, such as redeposited material and recast layers, result in coating inclusions. Oxidation testing also shows the relationship between the cooling hole diameter and coating durability.

EDD method; nickel aluminide; turbine blade; durability; jet engine;