KAZIMIERAS AUGUSTAITIS, Vytautas ;ŠEŠOK, Nikolaj . The Relative Transversal Vibrations of Printing-Press Cylinders that are Pressed Against Each Other via an Elastic Blanket. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 50, n.5, p. 277-290, july 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/the-relative-transversal-vibrations-of-printing-press-cylinders-that-are-pressed-against-each-other-via-an-elastic-blanket/>. Date accessed: 05 nov. 2024. doi:http://dx.doi.org/.
Kazimieras Augustaitis, V., & Šešok, N. (2004). The Relative Transversal Vibrations of Printing-Press Cylinders that are Pressed Against Each Other via an Elastic Blanket. Strojniški vestnik - Journal of Mechanical Engineering, 50(5), 277-290. doi:http://dx.doi.org/
@article{., author = {Vytautas Kazimieras Augustaitis and Nikolaj Šešok}, title = {The Relative Transversal Vibrations of Printing-Press Cylinders that are Pressed Against Each Other via an Elastic Blanket}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {50}, number = {5}, year = {2004}, keywords = {printing; offset printing; printing press; vibration; }, abstract = {In this paper we present the results of a computer-aided analytical investigation of the relative transversal vibrations of the cylinders in a web-offset double-sided printing press. An original method for carrying out the investigation, using a computer simulation, is presented. The printing press consists of the following cylinders that rotate during its operation and are pressed against each other via a thin (about 2 mm) elastic, rubberized cloth (called a blanket): two plate cylinders, with printing forms attached to them, and two blanket cylinders, with a paper tape moving between them for the printing. During the investigation, the deflections of the cylinders as well as the elasticity and damping of the blanket and the cylinders bearing units were assessed. These vibrations caused changes in the pressure between the cylinders, thus reducing the quality of the prints. After investigating the features of the free and forced relative vibrations of the cylinders, it was decided to reduce the intensity of the vibrations by using cylinders with identical dynamic responses. Data from the experimental investigation that show the impact of the variations of the pressure between the cylinders on the quality of the prints are presented.}, issn = {0039-2480}, pages = {277-290}, doi = {}, url = {https://www.sv-jme.eu/sl/article/the-relative-transversal-vibrations-of-printing-press-cylinders-that-are-pressed-against-each-other-via-an-elastic-blanket/} }
Kazimieras Augustaitis, V.,Šešok, N. 2004 July 50. The Relative Transversal Vibrations of Printing-Press Cylinders that are Pressed Against Each Other via an Elastic Blanket. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 50:5
%A Kazimieras Augustaitis, Vytautas %A Šešok, Nikolaj %D 2004 %T The Relative Transversal Vibrations of Printing-Press Cylinders that are Pressed Against Each Other via an Elastic Blanket %B 2004 %9 printing; offset printing; printing press; vibration; %! The Relative Transversal Vibrations of Printing-Press Cylinders that are Pressed Against Each Other via an Elastic Blanket %K printing; offset printing; printing press; vibration; %X In this paper we present the results of a computer-aided analytical investigation of the relative transversal vibrations of the cylinders in a web-offset double-sided printing press. An original method for carrying out the investigation, using a computer simulation, is presented. The printing press consists of the following cylinders that rotate during its operation and are pressed against each other via a thin (about 2 mm) elastic, rubberized cloth (called a blanket): two plate cylinders, with printing forms attached to them, and two blanket cylinders, with a paper tape moving between them for the printing. During the investigation, the deflections of the cylinders as well as the elasticity and damping of the blanket and the cylinders bearing units were assessed. These vibrations caused changes in the pressure between the cylinders, thus reducing the quality of the prints. After investigating the features of the free and forced relative vibrations of the cylinders, it was decided to reduce the intensity of the vibrations by using cylinders with identical dynamic responses. Data from the experimental investigation that show the impact of the variations of the pressure between the cylinders on the quality of the prints are presented. %U https://www.sv-jme.eu/sl/article/the-relative-transversal-vibrations-of-printing-press-cylinders-that-are-pressed-against-each-other-via-an-elastic-blanket/ %0 Journal Article %R %& 277 %P 14 %J Strojniški vestnik - Journal of Mechanical Engineering %V 50 %N 5 %@ 0039-2480 %8 2017-07-07 %7 2017-07-07
Kazimieras Augustaitis, Vytautas, & Nikolaj Šešok. "The Relative Transversal Vibrations of Printing-Press Cylinders that are Pressed Against Each Other via an Elastic Blanket." Strojniški vestnik - Journal of Mechanical Engineering [Online], 50.5 (2004): 277-290. Web. 05 Nov. 2024
TY - JOUR AU - Kazimieras Augustaitis, Vytautas AU - Šešok, Nikolaj PY - 2004 TI - The Relative Transversal Vibrations of Printing-Press Cylinders that are Pressed Against Each Other via an Elastic Blanket JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - printing; offset printing; printing press; vibration; N2 - In this paper we present the results of a computer-aided analytical investigation of the relative transversal vibrations of the cylinders in a web-offset double-sided printing press. An original method for carrying out the investigation, using a computer simulation, is presented. The printing press consists of the following cylinders that rotate during its operation and are pressed against each other via a thin (about 2 mm) elastic, rubberized cloth (called a blanket): two plate cylinders, with printing forms attached to them, and two blanket cylinders, with a paper tape moving between them for the printing. During the investigation, the deflections of the cylinders as well as the elasticity and damping of the blanket and the cylinders bearing units were assessed. These vibrations caused changes in the pressure between the cylinders, thus reducing the quality of the prints. After investigating the features of the free and forced relative vibrations of the cylinders, it was decided to reduce the intensity of the vibrations by using cylinders with identical dynamic responses. Data from the experimental investigation that show the impact of the variations of the pressure between the cylinders on the quality of the prints are presented. UR - https://www.sv-jme.eu/sl/article/the-relative-transversal-vibrations-of-printing-press-cylinders-that-are-pressed-against-each-other-via-an-elastic-blanket/
@article{{}{.}, author = {Kazimieras Augustaitis, V., Šešok, N.}, title = {The Relative Transversal Vibrations of Printing-Press Cylinders that are Pressed Against Each Other via an Elastic Blanket}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {50}, number = {5}, year = {2004}, doi = {}, url = {https://www.sv-jme.eu/sl/article/the-relative-transversal-vibrations-of-printing-press-cylinders-that-are-pressed-against-each-other-via-an-elastic-blanket/} }
TY - JOUR AU - Kazimieras Augustaitis, Vytautas AU - Šešok, Nikolaj PY - 2017/07/07 TI - The Relative Transversal Vibrations of Printing-Press Cylinders that are Pressed Against Each Other via an Elastic Blanket JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 50, No 5 (2004): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - printing, offset printing, printing press, vibration, N2 - In this paper we present the results of a computer-aided analytical investigation of the relative transversal vibrations of the cylinders in a web-offset double-sided printing press. An original method for carrying out the investigation, using a computer simulation, is presented. The printing press consists of the following cylinders that rotate during its operation and are pressed against each other via a thin (about 2 mm) elastic, rubberized cloth (called a blanket): two plate cylinders, with printing forms attached to them, and two blanket cylinders, with a paper tape moving between them for the printing. During the investigation, the deflections of the cylinders as well as the elasticity and damping of the blanket and the cylinders bearing units were assessed. These vibrations caused changes in the pressure between the cylinders, thus reducing the quality of the prints. After investigating the features of the free and forced relative vibrations of the cylinders, it was decided to reduce the intensity of the vibrations by using cylinders with identical dynamic responses. Data from the experimental investigation that show the impact of the variations of the pressure between the cylinders on the quality of the prints are presented. UR - https://www.sv-jme.eu/sl/article/the-relative-transversal-vibrations-of-printing-press-cylinders-that-are-pressed-against-each-other-via-an-elastic-blanket/
Kazimieras Augustaitis, Vytautas, AND Šešok, Nikolaj. "The Relative Transversal Vibrations of Printing-Press Cylinders that are Pressed Against Each Other via an Elastic Blanket" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 50 Number 5 (07 July 2017)
Strojniški vestnik - Journal of Mechanical Engineering 50(2004)5, 277-290
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
In this paper we present the results of a computer-aided analytical investigation of the relative transversal vibrations of the cylinders in a web-offset double-sided printing press. An original method for carrying out the investigation, using a computer simulation, is presented. The printing press consists of the following cylinders that rotate during its operation and are pressed against each other via a thin (about 2 mm) elastic, rubberized cloth (called a blanket): two plate cylinders, with printing forms attached to them, and two blanket cylinders, with a paper tape moving between them for the printing. During the investigation, the deflections of the cylinders as well as the elasticity and damping of the blanket and the cylinders bearing units were assessed. These vibrations caused changes in the pressure between the cylinders, thus reducing the quality of the prints. After investigating the features of the free and forced relative vibrations of the cylinders, it was decided to reduce the intensity of the vibrations by using cylinders with identical dynamic responses. Data from the experimental investigation that show the impact of the variations of the pressure between the cylinders on the quality of the prints are presented.