The Trends in Usage and Barriers of Innovation Management Techniques in New Product Development

1034 Ogledov
1007 Prenosov
Izvoz citacije: ABNT
LEBER, Marjan ;BASTIČ, Majda ;BUCHMEISTER, Borut .
The Trends in Usage and Barriers of Innovation Management Techniques in New Product Development. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 60, n.6, p. 382-388, june 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/the-trends-in-usage-and-barriers-of-innovation-management-techniques-in-new-product-development/>. Date accessed: 17 apr. 2021. 
doi:http://dx.doi.org/10.5545/sv-jme.2013.1611.
Leber, M., Bastič, M., & Buchmeister, B.
(2014).
The Trends in Usage and Barriers of Innovation Management Techniques in New Product Development.
Strojniški vestnik - Journal of Mechanical Engineering, 60(6), 382-388.
doi:http://dx.doi.org/10.5545/sv-jme.2013.1611
@article{sv-jmesv-jme.2013.1611,
	author = {Marjan  Leber and Majda  Bastič and Borut  Buchmeister},
	title = {The Trends in Usage and Barriers of Innovation Management Techniques in New Product Development},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {60},
	number = {6},
	year = {2014},
	keywords = {innovation management techniques; new product development; longitudinal study},
	abstract = {This paper reports the results of a survey on the use of innovation management techniques (IMTs) with the potential to improve effectiveness of new product development (NPD), and customer satisfaction as well as about those barriers preventing their introduction in Slovene firms in the period from 2003 to 2011. The results show that small percentage of Slovene firms used IMTs. Failure mode and effects analysis (FMEA) was found as the most applied IMT in Slovene firms with the highest perceived utility potential to reduce development costs and improve customer satisfaction. Results also indicate a trend towards the increasing use of fault tree analysis (FTA), value analysis, target costing, and TRIZ especially during the period of 2008-2011 which coincides with the period of economic and financial crisis. IMT complexity, a needed coaching and training and the lack of input data for IMT usage were recognized as the main barriers to implementing IMTs in Slovene firms.},
	issn = {0039-2480},	pages = {382-388},	doi = {10.5545/sv-jme.2013.1611},
	url = {https://www.sv-jme.eu/sl/article/the-trends-in-usage-and-barriers-of-innovation-management-techniques-in-new-product-development/}
}
Leber, M.,Bastič, M.,Buchmeister, B.
2014 June 60. The Trends in Usage and Barriers of Innovation Management Techniques in New Product Development. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 60:6
%A Leber, Marjan 
%A Bastič, Majda 
%A Buchmeister, Borut 
%D 2014
%T The Trends in Usage and Barriers of Innovation Management Techniques in New Product Development
%B 2014
%9 innovation management techniques; new product development; longitudinal study
%! The Trends in Usage and Barriers of Innovation Management Techniques in New Product Development
%K innovation management techniques; new product development; longitudinal study
%X This paper reports the results of a survey on the use of innovation management techniques (IMTs) with the potential to improve effectiveness of new product development (NPD), and customer satisfaction as well as about those barriers preventing their introduction in Slovene firms in the period from 2003 to 2011. The results show that small percentage of Slovene firms used IMTs. Failure mode and effects analysis (FMEA) was found as the most applied IMT in Slovene firms with the highest perceived utility potential to reduce development costs and improve customer satisfaction. Results also indicate a trend towards the increasing use of fault tree analysis (FTA), value analysis, target costing, and TRIZ especially during the period of 2008-2011 which coincides with the period of economic and financial crisis. IMT complexity, a needed coaching and training and the lack of input data for IMT usage were recognized as the main barriers to implementing IMTs in Slovene firms.
%U https://www.sv-jme.eu/sl/article/the-trends-in-usage-and-barriers-of-innovation-management-techniques-in-new-product-development/
%0 Journal Article
%R 10.5545/sv-jme.2013.1611
%& 382
%P 7
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 60
%N 6
%@ 0039-2480
%8 2018-06-28
%7 2018-06-28
Leber, Marjan, Majda  Bastič, & Borut  Buchmeister.
"The Trends in Usage and Barriers of Innovation Management Techniques in New Product Development." Strojniški vestnik - Journal of Mechanical Engineering [Online], 60.6 (2014): 382-388. Web.  17 Apr. 2021
TY  - JOUR
AU  - Leber, Marjan 
AU  - Bastič, Majda 
AU  - Buchmeister, Borut 
PY  - 2014
TI  - The Trends in Usage and Barriers of Innovation Management Techniques in New Product Development
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2013.1611
KW  - innovation management techniques; new product development; longitudinal study
N2  - This paper reports the results of a survey on the use of innovation management techniques (IMTs) with the potential to improve effectiveness of new product development (NPD), and customer satisfaction as well as about those barriers preventing their introduction in Slovene firms in the period from 2003 to 2011. The results show that small percentage of Slovene firms used IMTs. Failure mode and effects analysis (FMEA) was found as the most applied IMT in Slovene firms with the highest perceived utility potential to reduce development costs and improve customer satisfaction. Results also indicate a trend towards the increasing use of fault tree analysis (FTA), value analysis, target costing, and TRIZ especially during the period of 2008-2011 which coincides with the period of economic and financial crisis. IMT complexity, a needed coaching and training and the lack of input data for IMT usage were recognized as the main barriers to implementing IMTs in Slovene firms.
UR  - https://www.sv-jme.eu/sl/article/the-trends-in-usage-and-barriers-of-innovation-management-techniques-in-new-product-development/
@article{{sv-jme}{sv-jme.2013.1611},
	author = {Leber, M., Bastič, M., Buchmeister, B.},
	title = {The Trends in Usage and Barriers of Innovation Management Techniques in New Product Development},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {60},
	number = {6},
	year = {2014},
	doi = {10.5545/sv-jme.2013.1611},
	url = {https://www.sv-jme.eu/sl/article/the-trends-in-usage-and-barriers-of-innovation-management-techniques-in-new-product-development/}
}
TY  - JOUR
AU  - Leber, Marjan 
AU  - Bastič, Majda 
AU  - Buchmeister, Borut 
PY  - 2018/06/28
TI  - The Trends in Usage and Barriers of Innovation Management Techniques in New Product Development
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 60, No 6 (2014): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2013.1611
KW  - innovation management techniques, new product development, longitudinal study
N2  - This paper reports the results of a survey on the use of innovation management techniques (IMTs) with the potential to improve effectiveness of new product development (NPD), and customer satisfaction as well as about those barriers preventing their introduction in Slovene firms in the period from 2003 to 2011. The results show that small percentage of Slovene firms used IMTs. Failure mode and effects analysis (FMEA) was found as the most applied IMT in Slovene firms with the highest perceived utility potential to reduce development costs and improve customer satisfaction. Results also indicate a trend towards the increasing use of fault tree analysis (FTA), value analysis, target costing, and TRIZ especially during the period of 2008-2011 which coincides with the period of economic and financial crisis. IMT complexity, a needed coaching and training and the lack of input data for IMT usage were recognized as the main barriers to implementing IMTs in Slovene firms.
UR  - https://www.sv-jme.eu/sl/article/the-trends-in-usage-and-barriers-of-innovation-management-techniques-in-new-product-development/
Leber, Marjan, Bastič, Majda, AND Buchmeister, Borut.
"The Trends in Usage and Barriers of Innovation Management Techniques in New Product Development" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 60 Number 6 (28 June 2018)

Avtorji

Inštitucije

  • University of Maribor, Faculty of Mechanical Engineering, Slovenia 1
  • University of Maribor, Faculty of Economics and Business, Slovenia 2

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 60(2014)6, 382-388

https://doi.org/10.5545/sv-jme.2013.1611

This paper reports the results of a survey on the use of innovation management techniques (IMTs) with the potential to improve effectiveness of new product development (NPD), and customer satisfaction as well as about those barriers preventing their introduction in Slovene firms in the period from 2003 to 2011. The results show that small percentage of Slovene firms used IMTs. Failure mode and effects analysis (FMEA) was found as the most applied IMT in Slovene firms with the highest perceived utility potential to reduce development costs and improve customer satisfaction. Results also indicate a trend towards the increasing use of fault tree analysis (FTA), value analysis, target costing, and TRIZ especially during the period of 2008-2011 which coincides with the period of economic and financial crisis. IMT complexity, a needed coaching and training and the lack of input data for IMT usage were recognized as the main barriers to implementing IMTs in Slovene firms.

innovation management techniques; new product development; longitudinal study