The Use of Numerical Simulations in the Development of Tools for the Sheet-Metal Parts of Cars

705 Ogledov
282 Prenosov
Izvoz citacije: ABNT
GANTAR, Gašper ;KUZMAN, Karl ;LJEVAR, Marko .
The Use of Numerical Simulations in the Development of Tools for the Sheet-Metal Parts of Cars. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 47, n.10, p. 605-614, july 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/the-use-of-numerical-simulations-in-the-development-of-tools-for-the-sheet-metal-parts-of-cars/>. Date accessed: 06 jun. 2020. 
doi:http://dx.doi.org/.
Gantar, G., Kuzman, K., & Ljevar, M.
(2001).
The Use of Numerical Simulations in the Development of Tools for the Sheet-Metal Parts of Cars.
Strojniški vestnik - Journal of Mechanical Engineering, 47(10), 605-614.
doi:http://dx.doi.org/
@article{.,
	author = {Gašper  Gantar and Karl  Kuzman and Marko  Ljevar},
	title = {The Use of Numerical Simulations in the Development of Tools for the Sheet-Metal Parts of Cars},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {47},
	number = {10},
	year = {2001},
	keywords = {sheet metal forming; numerical simulations; product development; optimization; },
	abstract = {Many tool-manufacturing companies in Slovenia are producing the tools required for the sheetmetal parts of cars. Numerical simulations based on the finite-element method (FEM) have recently become widely used in order to reduce the development times and the number of mistakes associated with the manufacture of these tools. Production technologies are tested in the so-called virtual environment before the tools are produced. Mistakes are detected at an early phase of the development cycle, and as a result, their removal is cost effective. In this paper we present the implementation of numerical simulations in the development cycle of a tool for a new product.},
	issn = {0039-2480},	pages = {605-614},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/the-use-of-numerical-simulations-in-the-development-of-tools-for-the-sheet-metal-parts-of-cars/}
}
Gantar, G.,Kuzman, K.,Ljevar, M.
2001 July 47. The Use of Numerical Simulations in the Development of Tools for the Sheet-Metal Parts of Cars. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 47:10
%A Gantar, Gašper 
%A Kuzman, Karl 
%A Ljevar, Marko 
%D 2001
%T The Use of Numerical Simulations in the Development of Tools for the Sheet-Metal Parts of Cars
%B 2001
%9 sheet metal forming; numerical simulations; product development; optimization; 
%! The Use of Numerical Simulations in the Development of Tools for the Sheet-Metal Parts of Cars
%K sheet metal forming; numerical simulations; product development; optimization; 
%X Many tool-manufacturing companies in Slovenia are producing the tools required for the sheetmetal parts of cars. Numerical simulations based on the finite-element method (FEM) have recently become widely used in order to reduce the development times and the number of mistakes associated with the manufacture of these tools. Production technologies are tested in the so-called virtual environment before the tools are produced. Mistakes are detected at an early phase of the development cycle, and as a result, their removal is cost effective. In this paper we present the implementation of numerical simulations in the development cycle of a tool for a new product.
%U https://www.sv-jme.eu/sl/article/the-use-of-numerical-simulations-in-the-development-of-tools-for-the-sheet-metal-parts-of-cars/
%0 Journal Article
%R 
%& 605
%P 10
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 47
%N 10
%@ 0039-2480
%8 2017-07-07
%7 2017-07-07
Gantar, Gašper, Karl  Kuzman, & Marko  Ljevar.
"The Use of Numerical Simulations in the Development of Tools for the Sheet-Metal Parts of Cars." Strojniški vestnik - Journal of Mechanical Engineering [Online], 47.10 (2001): 605-614. Web.  06 Jun. 2020
TY  - JOUR
AU  - Gantar, Gašper 
AU  - Kuzman, Karl 
AU  - Ljevar, Marko 
PY  - 2001
TI  - The Use of Numerical Simulations in the Development of Tools for the Sheet-Metal Parts of Cars
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - sheet metal forming; numerical simulations; product development; optimization; 
N2  - Many tool-manufacturing companies in Slovenia are producing the tools required for the sheetmetal parts of cars. Numerical simulations based on the finite-element method (FEM) have recently become widely used in order to reduce the development times and the number of mistakes associated with the manufacture of these tools. Production technologies are tested in the so-called virtual environment before the tools are produced. Mistakes are detected at an early phase of the development cycle, and as a result, their removal is cost effective. In this paper we present the implementation of numerical simulations in the development cycle of a tool for a new product.
UR  - https://www.sv-jme.eu/sl/article/the-use-of-numerical-simulations-in-the-development-of-tools-for-the-sheet-metal-parts-of-cars/
@article{{}{.},
	author = {Gantar, G., Kuzman, K., Ljevar, M.},
	title = {The Use of Numerical Simulations in the Development of Tools for the Sheet-Metal Parts of Cars},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {47},
	number = {10},
	year = {2001},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/the-use-of-numerical-simulations-in-the-development-of-tools-for-the-sheet-metal-parts-of-cars/}
}
TY  - JOUR
AU  - Gantar, Gašper 
AU  - Kuzman, Karl 
AU  - Ljevar, Marko 
PY  - 2017/07/07
TI  - The Use of Numerical Simulations in the Development of Tools for the Sheet-Metal Parts of Cars
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 47, No 10 (2001): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - sheet metal forming, numerical simulations, product development, optimization, 
N2  - Many tool-manufacturing companies in Slovenia are producing the tools required for the sheetmetal parts of cars. Numerical simulations based on the finite-element method (FEM) have recently become widely used in order to reduce the development times and the number of mistakes associated with the manufacture of these tools. Production technologies are tested in the so-called virtual environment before the tools are produced. Mistakes are detected at an early phase of the development cycle, and as a result, their removal is cost effective. In this paper we present the implementation of numerical simulations in the development cycle of a tool for a new product.
UR  - https://www.sv-jme.eu/sl/article/the-use-of-numerical-simulations-in-the-development-of-tools-for-the-sheet-metal-parts-of-cars/
Gantar, Gašper, Kuzman, Karl, AND Ljevar, Marko.
"The Use of Numerical Simulations in the Development of Tools for the Sheet-Metal Parts of Cars" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 47 Number 10 (07 July 2017)

Avtorji

Inštitucije

  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia
  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia
  • M.P.P., Maribor, Slovenia

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 47(2001)10, 605-614

Many tool-manufacturing companies in Slovenia are producing the tools required for the sheetmetal parts of cars. Numerical simulations based on the finite-element method (FEM) have recently become widely used in order to reduce the development times and the number of mistakes associated with the manufacture of these tools. Production technologies are tested in the so-called virtual environment before the tools are produced. Mistakes are detected at an early phase of the development cycle, and as a result, their removal is cost effective. In this paper we present the implementation of numerical simulations in the development cycle of a tool for a new product.

sheet metal forming; numerical simulations; product development; optimization;