BUNJAKU, Florent ;FILKOSKI, Risto V.;SAHITI, Naser . Thermal Optimization and Comparison of Geometric Parameters of Rectangular and Triangular Fins with Constant Surfacing. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 63, n.7-8, p. 439-446, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/thermal-optimization-and-comparison-of-geometric-parameters-of-rectangular-and-triangular-fins-with-constant-surfacing/>. Date accessed: 09 dec. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2016.4276.
Bunjaku, F., Filkoski, R., & Sahiti, N. (2017). Thermal Optimization and Comparison of Geometric Parameters of Rectangular and Triangular Fins with Constant Surfacing. Strojniški vestnik - Journal of Mechanical Engineering, 63(7-8), 439-446. doi:http://dx.doi.org/10.5545/sv-jme.2016.4276
@article{sv-jmesv-jme.2016.4276, author = {Florent Bunjaku and Risto V. Filkoski and Naser Sahiti}, title = {Thermal Optimization and Comparison of Geometric Parameters of Rectangular and Triangular Fins with Constant Surfacing}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {63}, number = {7-8}, year = {2017}, keywords = {fins; heat flux; optimisation; geometrical parameters; rectangular & triangular profile; fin efficiency}, abstract = {This paper presents an optimization model of fins of rectangular and triangular profiles, based on a constant value of the transverse cutting surface, as well as the optimization of the ratio of efficiency of both fin profiles. The optimization model is based on the analytical and numerical simulation of the heat flux through fins in order to derive relevant thermo-physical parameters of the investigated fin profiles. The optimization of both fin profiles is carried out for different fin materials based on constant heat transfer coefficient and for different fin materials based on variable heat flux. The efficiency of fins as relevant fin goodness parameter is also analysed and the optimal values of the ratio of fin efficiency of both profiles is graphically presented and the optimal value estimated. Numerical simulation of fin models is carried out by using ANSYS/Fluent software.}, issn = {0039-2480}, pages = {439-446}, doi = {10.5545/sv-jme.2016.4276}, url = {https://www.sv-jme.eu/sl/article/thermal-optimization-and-comparison-of-geometric-parameters-of-rectangular-and-triangular-fins-with-constant-surfacing/} }
Bunjaku, F.,Filkoski, R.,Sahiti, N. 2017 June 63. Thermal Optimization and Comparison of Geometric Parameters of Rectangular and Triangular Fins with Constant Surfacing. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 63:7-8
%A Bunjaku, Florent %A Filkoski, Risto V. %A Sahiti, Naser %D 2017 %T Thermal Optimization and Comparison of Geometric Parameters of Rectangular and Triangular Fins with Constant Surfacing %B 2017 %9 fins; heat flux; optimisation; geometrical parameters; rectangular & triangular profile; fin efficiency %! Thermal Optimization and Comparison of Geometric Parameters of Rectangular and Triangular Fins with Constant Surfacing %K fins; heat flux; optimisation; geometrical parameters; rectangular & triangular profile; fin efficiency %X This paper presents an optimization model of fins of rectangular and triangular profiles, based on a constant value of the transverse cutting surface, as well as the optimization of the ratio of efficiency of both fin profiles. The optimization model is based on the analytical and numerical simulation of the heat flux through fins in order to derive relevant thermo-physical parameters of the investigated fin profiles. The optimization of both fin profiles is carried out for different fin materials based on constant heat transfer coefficient and for different fin materials based on variable heat flux. The efficiency of fins as relevant fin goodness parameter is also analysed and the optimal values of the ratio of fin efficiency of both profiles is graphically presented and the optimal value estimated. Numerical simulation of fin models is carried out by using ANSYS/Fluent software. %U https://www.sv-jme.eu/sl/article/thermal-optimization-and-comparison-of-geometric-parameters-of-rectangular-and-triangular-fins-with-constant-surfacing/ %0 Journal Article %R 10.5545/sv-jme.2016.4276 %& 439 %P 8 %J Strojniški vestnik - Journal of Mechanical Engineering %V 63 %N 7-8 %@ 0039-2480 %8 2018-06-27 %7 2018-06-27
Bunjaku, Florent, Risto V. Filkoski, & Naser Sahiti. "Thermal Optimization and Comparison of Geometric Parameters of Rectangular and Triangular Fins with Constant Surfacing." Strojniški vestnik - Journal of Mechanical Engineering [Online], 63.7-8 (2017): 439-446. Web. 09 Dec. 2024
TY - JOUR AU - Bunjaku, Florent AU - Filkoski, Risto V. AU - Sahiti, Naser PY - 2017 TI - Thermal Optimization and Comparison of Geometric Parameters of Rectangular and Triangular Fins with Constant Surfacing JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2016.4276 KW - fins; heat flux; optimisation; geometrical parameters; rectangular & triangular profile; fin efficiency N2 - This paper presents an optimization model of fins of rectangular and triangular profiles, based on a constant value of the transverse cutting surface, as well as the optimization of the ratio of efficiency of both fin profiles. The optimization model is based on the analytical and numerical simulation of the heat flux through fins in order to derive relevant thermo-physical parameters of the investigated fin profiles. The optimization of both fin profiles is carried out for different fin materials based on constant heat transfer coefficient and for different fin materials based on variable heat flux. The efficiency of fins as relevant fin goodness parameter is also analysed and the optimal values of the ratio of fin efficiency of both profiles is graphically presented and the optimal value estimated. Numerical simulation of fin models is carried out by using ANSYS/Fluent software. UR - https://www.sv-jme.eu/sl/article/thermal-optimization-and-comparison-of-geometric-parameters-of-rectangular-and-triangular-fins-with-constant-surfacing/
@article{{sv-jme}{sv-jme.2016.4276}, author = {Bunjaku, F., Filkoski, R., Sahiti, N.}, title = {Thermal Optimization and Comparison of Geometric Parameters of Rectangular and Triangular Fins with Constant Surfacing}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {63}, number = {7-8}, year = {2017}, doi = {10.5545/sv-jme.2016.4276}, url = {https://www.sv-jme.eu/sl/article/thermal-optimization-and-comparison-of-geometric-parameters-of-rectangular-and-triangular-fins-with-constant-surfacing/} }
TY - JOUR AU - Bunjaku, Florent AU - Filkoski, Risto V. AU - Sahiti, Naser PY - 2018/06/27 TI - Thermal Optimization and Comparison of Geometric Parameters of Rectangular and Triangular Fins with Constant Surfacing JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 63, No 7-8 (2017): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2016.4276 KW - fins, heat flux, optimisation, geometrical parameters, rectangular & triangular profile, fin efficiency N2 - This paper presents an optimization model of fins of rectangular and triangular profiles, based on a constant value of the transverse cutting surface, as well as the optimization of the ratio of efficiency of both fin profiles. The optimization model is based on the analytical and numerical simulation of the heat flux through fins in order to derive relevant thermo-physical parameters of the investigated fin profiles. The optimization of both fin profiles is carried out for different fin materials based on constant heat transfer coefficient and for different fin materials based on variable heat flux. The efficiency of fins as relevant fin goodness parameter is also analysed and the optimal values of the ratio of fin efficiency of both profiles is graphically presented and the optimal value estimated. Numerical simulation of fin models is carried out by using ANSYS/Fluent software. UR - https://www.sv-jme.eu/sl/article/thermal-optimization-and-comparison-of-geometric-parameters-of-rectangular-and-triangular-fins-with-constant-surfacing/
Bunjaku, Florent, Filkoski, Risto, AND Sahiti, Naser. "Thermal Optimization and Comparison of Geometric Parameters of Rectangular and Triangular Fins with Constant Surfacing" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 63 Number 7-8 (27 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 63(2017)7-8, 439-446
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
This paper presents an optimization model of fins of rectangular and triangular profiles, based on a constant value of the transverse cutting surface, as well as the optimization of the ratio of efficiency of both fin profiles. The optimization model is based on the analytical and numerical simulation of the heat flux through fins in order to derive relevant thermo-physical parameters of the investigated fin profiles. The optimization of both fin profiles is carried out for different fin materials based on constant heat transfer coefficient and for different fin materials based on variable heat flux. The efficiency of fins as relevant fin goodness parameter is also analysed and the optimal values of the ratio of fin efficiency of both profiles is graphically presented and the optimal value estimated. Numerical simulation of fin models is carried out by using ANSYS/Fluent software.