Using buckling analysis to predict wrinkling in incremental sheet metal forming

715 Ogledov
810 Prenosov
Izvoz citacije: ABNT
LEMEŠ, Samir ;ZAIMOVIĆ-UZUNOVIĆ, Nermina .
Using buckling analysis to predict wrinkling in incremental sheet metal forming. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 54, n.2, p. 115-121, august 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/using-buckling-analysis-to-predict-wrinkling-in-incremental-sheet-metal-forming/>. Date accessed: 04 aug. 2020. 
doi:http://dx.doi.org/.
Lemeš, S., & Zaimović-Uzunović, N.
(2008).
Using buckling analysis to predict wrinkling in incremental sheet metal forming.
Strojniški vestnik - Journal of Mechanical Engineering, 54(2), 115-121.
doi:http://dx.doi.org/
@article{.,
	author = {Samir  Lemeš and Nermina  Zaimović-Uzunović},
	title = {Using buckling analysis to predict wrinkling in incremental sheet metal forming},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {54},
	number = {2},
	year = {2008},
	keywords = {sheet metal forming; incremental forming; buckling; finite element methods; },
	abstract = {The idea of using buckling analysis to predict wrinkling of sheet metal products manufactured by incremental forming is presented in this paper. We start from assumption that buckling analysis can be used to obtain geometry ofproduct after first forming operation. That shape and critical buckling force are calculated using finite element method in elastic domain. The analysis was performed for various values of tool diameter. Results were tested through measurement of product geometry after first forming operation. The analysis showed that upper tool diameter can be reduced without change in product quality expressed through number of wrinkles.},
	issn = {0039-2480},	pages = {115-121},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/using-buckling-analysis-to-predict-wrinkling-in-incremental-sheet-metal-forming/}
}
Lemeš, S.,Zaimović-Uzunović, N.
2008 August 54. Using buckling analysis to predict wrinkling in incremental sheet metal forming. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 54:2
%A Lemeš, Samir 
%A Zaimović-Uzunović, Nermina 
%D 2008
%T Using buckling analysis to predict wrinkling in incremental sheet metal forming
%B 2008
%9 sheet metal forming; incremental forming; buckling; finite element methods; 
%! Using buckling analysis to predict wrinkling in incremental sheet metal forming
%K sheet metal forming; incremental forming; buckling; finite element methods; 
%X The idea of using buckling analysis to predict wrinkling of sheet metal products manufactured by incremental forming is presented in this paper. We start from assumption that buckling analysis can be used to obtain geometry ofproduct after first forming operation. That shape and critical buckling force are calculated using finite element method in elastic domain. The analysis was performed for various values of tool diameter. Results were tested through measurement of product geometry after first forming operation. The analysis showed that upper tool diameter can be reduced without change in product quality expressed through number of wrinkles.
%U https://www.sv-jme.eu/sl/article/using-buckling-analysis-to-predict-wrinkling-in-incremental-sheet-metal-forming/
%0 Journal Article
%R 
%& 115
%P 7
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 54
%N 2
%@ 0039-2480
%8 2017-08-18
%7 2017-08-18
Lemeš, Samir, & Nermina  Zaimović-Uzunović.
"Using buckling analysis to predict wrinkling in incremental sheet metal forming." Strojniški vestnik - Journal of Mechanical Engineering [Online], 54.2 (2008): 115-121. Web.  04 Aug. 2020
TY  - JOUR
AU  - Lemeš, Samir 
AU  - Zaimović-Uzunović, Nermina 
PY  - 2008
TI  - Using buckling analysis to predict wrinkling in incremental sheet metal forming
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - sheet metal forming; incremental forming; buckling; finite element methods; 
N2  - The idea of using buckling analysis to predict wrinkling of sheet metal products manufactured by incremental forming is presented in this paper. We start from assumption that buckling analysis can be used to obtain geometry ofproduct after first forming operation. That shape and critical buckling force are calculated using finite element method in elastic domain. The analysis was performed for various values of tool diameter. Results were tested through measurement of product geometry after first forming operation. The analysis showed that upper tool diameter can be reduced without change in product quality expressed through number of wrinkles.
UR  - https://www.sv-jme.eu/sl/article/using-buckling-analysis-to-predict-wrinkling-in-incremental-sheet-metal-forming/
@article{{}{.},
	author = {Lemeš, S., Zaimović-Uzunović, N.},
	title = {Using buckling analysis to predict wrinkling in incremental sheet metal forming},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {54},
	number = {2},
	year = {2008},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/using-buckling-analysis-to-predict-wrinkling-in-incremental-sheet-metal-forming/}
}
TY  - JOUR
AU  - Lemeš, Samir 
AU  - Zaimović-Uzunović, Nermina 
PY  - 2017/08/18
TI  - Using buckling analysis to predict wrinkling in incremental sheet metal forming
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 54, No 2 (2008): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - sheet metal forming, incremental forming, buckling, finite element methods, 
N2  - The idea of using buckling analysis to predict wrinkling of sheet metal products manufactured by incremental forming is presented in this paper. We start from assumption that buckling analysis can be used to obtain geometry ofproduct after first forming operation. That shape and critical buckling force are calculated using finite element method in elastic domain. The analysis was performed for various values of tool diameter. Results were tested through measurement of product geometry after first forming operation. The analysis showed that upper tool diameter can be reduced without change in product quality expressed through number of wrinkles.
UR  - https://www.sv-jme.eu/sl/article/using-buckling-analysis-to-predict-wrinkling-in-incremental-sheet-metal-forming/
Lemeš, Samir, AND Zaimović-Uzunović, Nermina.
"Using buckling analysis to predict wrinkling in incremental sheet metal forming" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 54 Number 2 (18 August 2017)

Avtorji

Inštitucije

  • University of Zenica, Mechanical Engineering Faculty, Bosnia and Herzegovina
  • University of Zenica, Mechanical Engineering Faculty, Bosnia and Herzegovina

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 54(2008)2, 115-121

The idea of using buckling analysis to predict wrinkling of sheet metal products manufactured by incremental forming is presented in this paper. We start from assumption that buckling analysis can be used to obtain geometry ofproduct after first forming operation. That shape and critical buckling force are calculated using finite element method in elastic domain. The analysis was performed for various values of tool diameter. Results were tested through measurement of product geometry after first forming operation. The analysis showed that upper tool diameter can be reduced without change in product quality expressed through number of wrinkles.

sheet metal forming; incremental forming; buckling; finite element methods;