ADAMCZAK, Stanisław ;MIKO, Edward ;ČUŠ, Franci . A Model of Surface Roughness Constitution in the Metal Cutting Process Applying Tools with Defined Stereometry. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 55, n.1, p. 45-54, october 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/sl/article/a-model-of-surface-roughness-constitution-in-the-metal-cutting-process-applying-tools-with-defined-stereometry/>. Date accessed: 20 apr. 2024. doi:http://dx.doi.org/.
Adamczak, S., Miko, E., & Čuš, F. (2009). A Model of Surface Roughness Constitution in the Metal Cutting Process Applying Tools with Defined Stereometry. Strojniški vestnik - Journal of Mechanical Engineering, 55(1), 45-54. doi:http://dx.doi.org/
@article{.,
author = {Stanisław Adamczak and Edward Miko and Franci Čuš},
title = {A Model of Surface Roughness Constitution in the Metal Cutting Process Applying Tools with Defined Stereometry},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {55},
number = {1},
year = {2009},
keywords = {metal cutting; surface roughness finishing; },
abstract = {The process of surface roughness formation is complex and dependent on numerous factors. The analysis of the latest reports on the subject shows that mathematical relationships used for determining surface irregularities after turning and milling are not complete or accurate enough and, therefore, need to be corrected. A new generalized mathematical model of roughness formation was developed for surfaces shaped with round-nose tools. The model provides us with a quantitative analysis of the effects of the tool representation, undeformed chip thickness, tool vibrations in relation to the workpiece, tool run-out (for multicutter tools) and, indirectly, also tool wear. This model can be used to prepare separate models for most of the typical machining operations. Surface roughness is represented here by two parameters Ra and Rt. Simulations carried out for this model helped to develop nomograms which can be used for predicting and controlling the roughness Ra of surfaces sculptured by face milling.},
issn = {0039-2480}, pages = {45-54}, doi = {},
url = {https://www.sv-jme.eu/sl/article/a-model-of-surface-roughness-constitution-in-the-metal-cutting-process-applying-tools-with-defined-stereometry/}
}
Adamczak, S.,Miko, E.,Čuš, F. 2009 October 55. A Model of Surface Roughness Constitution in the Metal Cutting Process Applying Tools with Defined Stereometry. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 55:1
%A Adamczak, Stanisław %A Miko, Edward %A Čuš, Franci %D 2009 %T A Model of Surface Roughness Constitution in the Metal Cutting Process Applying Tools with Defined Stereometry %B 2009 %9 metal cutting; surface roughness finishing; %! A Model of Surface Roughness Constitution in the Metal Cutting Process Applying Tools with Defined Stereometry %K metal cutting; surface roughness finishing; %X The process of surface roughness formation is complex and dependent on numerous factors. The analysis of the latest reports on the subject shows that mathematical relationships used for determining surface irregularities after turning and milling are not complete or accurate enough and, therefore, need to be corrected. A new generalized mathematical model of roughness formation was developed for surfaces shaped with round-nose tools. The model provides us with a quantitative analysis of the effects of the tool representation, undeformed chip thickness, tool vibrations in relation to the workpiece, tool run-out (for multicutter tools) and, indirectly, also tool wear. This model can be used to prepare separate models for most of the typical machining operations. Surface roughness is represented here by two parameters Ra and Rt. Simulations carried out for this model helped to develop nomograms which can be used for predicting and controlling the roughness Ra of surfaces sculptured by face milling. %U https://www.sv-jme.eu/sl/article/a-model-of-surface-roughness-constitution-in-the-metal-cutting-process-applying-tools-with-defined-stereometry/ %0 Journal Article %R %& 45 %P 10 %J Strojniški vestnik - Journal of Mechanical Engineering %V 55 %N 1 %@ 0039-2480 %8 2017-10-24 %7 2017-10-24
Adamczak, Stanisław, Edward Miko, & Franci Čuš. "A Model of Surface Roughness Constitution in the Metal Cutting Process Applying Tools with Defined Stereometry." Strojniški vestnik - Journal of Mechanical Engineering [Online], 55.1 (2009): 45-54. Web. 20 Apr. 2024
TY - JOUR AU - Adamczak, Stanisław AU - Miko, Edward AU - Čuš, Franci PY - 2009 TI - A Model of Surface Roughness Constitution in the Metal Cutting Process Applying Tools with Defined Stereometry JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - metal cutting; surface roughness finishing; N2 - The process of surface roughness formation is complex and dependent on numerous factors. The analysis of the latest reports on the subject shows that mathematical relationships used for determining surface irregularities after turning and milling are not complete or accurate enough and, therefore, need to be corrected. A new generalized mathematical model of roughness formation was developed for surfaces shaped with round-nose tools. The model provides us with a quantitative analysis of the effects of the tool representation, undeformed chip thickness, tool vibrations in relation to the workpiece, tool run-out (for multicutter tools) and, indirectly, also tool wear. This model can be used to prepare separate models for most of the typical machining operations. Surface roughness is represented here by two parameters Ra and Rt. Simulations carried out for this model helped to develop nomograms which can be used for predicting and controlling the roughness Ra of surfaces sculptured by face milling. UR - https://www.sv-jme.eu/sl/article/a-model-of-surface-roughness-constitution-in-the-metal-cutting-process-applying-tools-with-defined-stereometry/
@article{{}{.},
author = {Adamczak, S., Miko, E., Čuš, F.},
title = {A Model of Surface Roughness Constitution in the Metal Cutting Process Applying Tools with Defined Stereometry},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {55},
number = {1},
year = {2009},
doi = {},
url = {https://www.sv-jme.eu/sl/article/a-model-of-surface-roughness-constitution-in-the-metal-cutting-process-applying-tools-with-defined-stereometry/}
}
TY - JOUR AU - Adamczak, Stanisław AU - Miko, Edward AU - Čuš, Franci PY - 2017/10/24 TI - A Model of Surface Roughness Constitution in the Metal Cutting Process Applying Tools with Defined Stereometry JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 55, No 1 (2009): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - metal cutting, surface roughness finishing, N2 - The process of surface roughness formation is complex and dependent on numerous factors. The analysis of the latest reports on the subject shows that mathematical relationships used for determining surface irregularities after turning and milling are not complete or accurate enough and, therefore, need to be corrected. A new generalized mathematical model of roughness formation was developed for surfaces shaped with round-nose tools. The model provides us with a quantitative analysis of the effects of the tool representation, undeformed chip thickness, tool vibrations in relation to the workpiece, tool run-out (for multicutter tools) and, indirectly, also tool wear. This model can be used to prepare separate models for most of the typical machining operations. Surface roughness is represented here by two parameters Ra and Rt. Simulations carried out for this model helped to develop nomograms which can be used for predicting and controlling the roughness Ra of surfaces sculptured by face milling. UR - https://www.sv-jme.eu/sl/article/a-model-of-surface-roughness-constitution-in-the-metal-cutting-process-applying-tools-with-defined-stereometry/
Adamczak, Stanisław, Miko, Edward, AND Čuš, Franci. "A Model of Surface Roughness Constitution in the Metal Cutting Process Applying Tools with Defined Stereometry" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 55 Number 1 (24 October 2017)
Strojniški vestnik - Journal of Mechanical Engineering 55(2009)1, 45-54
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The process of surface roughness formation is complex and dependent on numerous factors. The analysis of the latest reports on the subject shows that mathematical relationships used for determining surface irregularities after turning and milling are not complete or accurate enough and, therefore, need to be corrected. A new generalized mathematical model of roughness formation was developed for surfaces shaped with round-nose tools. The model provides us with a quantitative analysis of the effects of the tool representation, undeformed chip thickness, tool vibrations in relation to the workpiece, tool run-out (for multicutter tools) and, indirectly, also tool wear. This model can be used to prepare separate models for most of the typical machining operations. Surface roughness is represented here by two parameters Ra and Rt. Simulations carried out for this model helped to develop nomograms which can be used for predicting and controlling the roughness Ra of surfaces sculptured by face milling.