The Double-Sided Upsetting of the End Thickenings on Rod Blanks

380 Ogledov
311 Prenosov
Izvoz citacije: ABNT
DO, Anh Tu ;CHERNYAEV, Aleksey Vladimirovich .
The Double-Sided Upsetting of the End Thickenings on Rod Blanks. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 70, n.5-6, p. 223-230, june 2023. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/double-sided-upsetting-of-end-thickenings-on-rod-blanks/>. Date accessed: 01 dec. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2023.550.
Do, A., & Chernyaev, A.
(2024).
The Double-Sided Upsetting of the End Thickenings on Rod Blanks.
Strojniški vestnik - Journal of Mechanical Engineering, 70(5-6), 223-230.
doi:http://dx.doi.org/10.5545/sv-jme.2023.550
@article{sv-jmesv-jme.2023.550,
	author = {Anh Tu  Do and Aleksey Vladimirovich  Chernyaev},
	title = {The Double-Sided Upsetting of the End Thickenings on Rod Blanks},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {70},
	number = {5-6},
	year = {2024},
	keywords = {cold forging; upsetting; end thickenings; force; material damageability; },
	abstract = {The known methods for the plastic shaping of axisymmetric parts with bilateral end thickenings and the die equipment used for their application have several significant drawbacks, which may reduce the quality of manufactured products, increase their cost, and limit the technological capabilities of production. As a rule, they provide alternate plastic shaping of end thickenings. In this paper, we propose a method of simultaneous stamping of end thickenings on a bar stock in split dies and a stamping device for its implementation. To establish the power modes of stamping we carried out the simulation of the process under study using the finite element method in the QForm software package. The dependencies of the stamping force on the geometric dimensions of the workpiece and friction conditions on the contact surfaces are established. The damageability of the workpiece material made of AA5056 alloy was assessed, and a diagram was obtained to determine the number of required stamping operations.},
	issn = {0039-2480},	pages = {223-230},	doi = {10.5545/sv-jme.2023.550},
	url = {https://www.sv-jme.eu/sl/article/double-sided-upsetting-of-end-thickenings-on-rod-blanks/}
}
Do, A.,Chernyaev, A.
2024 June 70. The Double-Sided Upsetting of the End Thickenings on Rod Blanks. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 70:5-6
%A Do, Anh Tu 
%A Chernyaev, Aleksey Vladimirovich 
%D 2024
%T The Double-Sided Upsetting of the End Thickenings on Rod Blanks
%B 2024
%9 cold forging; upsetting; end thickenings; force; material damageability; 
%! The Double-Sided Upsetting of the End Thickenings on Rod Blanks
%K cold forging; upsetting; end thickenings; force; material damageability; 
%X The known methods for the plastic shaping of axisymmetric parts with bilateral end thickenings and the die equipment used for their application have several significant drawbacks, which may reduce the quality of manufactured products, increase their cost, and limit the technological capabilities of production. As a rule, they provide alternate plastic shaping of end thickenings. In this paper, we propose a method of simultaneous stamping of end thickenings on a bar stock in split dies and a stamping device for its implementation. To establish the power modes of stamping we carried out the simulation of the process under study using the finite element method in the QForm software package. The dependencies of the stamping force on the geometric dimensions of the workpiece and friction conditions on the contact surfaces are established. The damageability of the workpiece material made of AA5056 alloy was assessed, and a diagram was obtained to determine the number of required stamping operations.
%U https://www.sv-jme.eu/sl/article/double-sided-upsetting-of-end-thickenings-on-rod-blanks/
%0 Journal Article
%R 10.5545/sv-jme.2023.550
%& 223
%P 8
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 70
%N 5-6
%@ 0039-2480
%8 2023-06-21
%7 2023-06-21
Do, Anh Tu, & Aleksey Vladimirovich  Chernyaev.
"The Double-Sided Upsetting of the End Thickenings on Rod Blanks." Strojniški vestnik - Journal of Mechanical Engineering [Online], 70.5-6 (2024): 223-230. Web.  01 Dec. 2024
TY  - JOUR
AU  - Do, Anh Tu 
AU  - Chernyaev, Aleksey Vladimirovich 
PY  - 2024
TI  - The Double-Sided Upsetting of the End Thickenings on Rod Blanks
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2023.550
KW  - cold forging; upsetting; end thickenings; force; material damageability; 
N2  - The known methods for the plastic shaping of axisymmetric parts with bilateral end thickenings and the die equipment used for their application have several significant drawbacks, which may reduce the quality of manufactured products, increase their cost, and limit the technological capabilities of production. As a rule, they provide alternate plastic shaping of end thickenings. In this paper, we propose a method of simultaneous stamping of end thickenings on a bar stock in split dies and a stamping device for its implementation. To establish the power modes of stamping we carried out the simulation of the process under study using the finite element method in the QForm software package. The dependencies of the stamping force on the geometric dimensions of the workpiece and friction conditions on the contact surfaces are established. The damageability of the workpiece material made of AA5056 alloy was assessed, and a diagram was obtained to determine the number of required stamping operations.
UR  - https://www.sv-jme.eu/sl/article/double-sided-upsetting-of-end-thickenings-on-rod-blanks/
@article{{sv-jme}{sv-jme.2023.550},
	author = {Do, A., Chernyaev, A.},
	title = {The Double-Sided Upsetting of the End Thickenings on Rod Blanks},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {70},
	number = {5-6},
	year = {2024},
	doi = {10.5545/sv-jme.2023.550},
	url = {https://www.sv-jme.eu/sl/article/double-sided-upsetting-of-end-thickenings-on-rod-blanks/}
}
TY  - JOUR
AU  - Do, Anh Tu 
AU  - Chernyaev, Aleksey Vladimirovich 
PY  - 2023/06/21
TI  - The Double-Sided Upsetting of the End Thickenings on Rod Blanks
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 70, No 5-6 (2024): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2023.550
KW  - cold forging, upsetting, end thickenings, force, material damageability, 
N2  - The known methods for the plastic shaping of axisymmetric parts with bilateral end thickenings and the die equipment used for their application have several significant drawbacks, which may reduce the quality of manufactured products, increase their cost, and limit the technological capabilities of production. As a rule, they provide alternate plastic shaping of end thickenings. In this paper, we propose a method of simultaneous stamping of end thickenings on a bar stock in split dies and a stamping device for its implementation. To establish the power modes of stamping we carried out the simulation of the process under study using the finite element method in the QForm software package. The dependencies of the stamping force on the geometric dimensions of the workpiece and friction conditions on the contact surfaces are established. The damageability of the workpiece material made of AA5056 alloy was assessed, and a diagram was obtained to determine the number of required stamping operations.
UR  - https://www.sv-jme.eu/sl/article/double-sided-upsetting-of-end-thickenings-on-rod-blanks/
Do, Anh Tu, AND Chernyaev, Aleksey Vladimirovich.
"The Double-Sided Upsetting of the End Thickenings on Rod Blanks" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 70 Number 5-6 (21 June 2023)

Avtorji

Inštitucije

  • Faculty of Mechanical Engineering and Mechatronics, Phenikaa University, Vietnam 1
  • Tula State University, Russia 2

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 70(2024)5-6, 223-230
© The Authors 2024. CC BY 4.0 Int.

https://doi.org/10.5545/sv-jme.2023.550

The known methods for the plastic shaping of axisymmetric parts with bilateral end thickenings and the die equipment used for their application have several significant drawbacks, which may reduce the quality of manufactured products, increase their cost, and limit the technological capabilities of production. As a rule, they provide alternate plastic shaping of end thickenings. In this paper, we propose a method of simultaneous stamping of end thickenings on a bar stock in split dies and a stamping device for its implementation. To establish the power modes of stamping we carried out the simulation of the process under study using the finite element method in the QForm software package. The dependencies of the stamping force on the geometric dimensions of the workpiece and friction conditions on the contact surfaces are established. The damageability of the workpiece material made of AA5056 alloy was assessed, and a diagram was obtained to determine the number of required stamping operations.

cold forging; upsetting; end thickenings; force; material damageability;