DO, Anh Tu ;CHERNYAEV, Aleksey Vladimirovich . Double-sided upsetting of end thickenings on rod blanks. Articles in Press, [S.l.], v. 0, n.0, p. , june 2023. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/double-sided-upsetting-of-end-thickenings-on-rod-blanks/>. Date accessed: 08 may. 2024. doi:http://dx.doi.org/.
Do, A., & Chernyaev, A. (0). Double-sided upsetting of end thickenings on rod blanks. Articles in Press, 0(0), . doi:http://dx.doi.org/
@article{., author = {Anh Tu Do and Aleksey Vladimirovich Chernyaev}, title = {Double-sided upsetting of end thickenings on rod blanks}, journal = {Articles in Press}, volume = {0}, number = {0}, year = {0}, keywords = {}, abstract = {The known methods of plastic shaping of axisymmetric parts with bilateral end thickenings and the die equipment used for their implementation have a number of significant drawbacks that reduce the quality of manufactured products, increase their cost and limit the technological capabilities of production. As a rule, they provide for alternate plastic shaping of end thickenings. A method is proposed for simultaneous stamping of end thickenings on a bar stock in split dies and a stamping device for its implementation. To establish the power modes of stamping, the simulation of the process under study was performed using the finite element method in the QForm software package. The dependences of the stamping force on the geometric dimensions of the workpiece and friction conditions on the contact surfaces are established. The damageability of the workpiece material made of AA5056 alloy was assessed, and a diagram was obtained to determine the number of required stamping operations.}, issn = {0039-2480}, pages = {}, doi = {}, url = {https://www.sv-jme.eu/article/double-sided-upsetting-of-end-thickenings-on-rod-blanks/} }
Do, A.,Chernyaev, A. 0 June 0. Double-sided upsetting of end thickenings on rod blanks. Articles in Press. [Online] 0:0
%A Do, Anh Tu %A Chernyaev, Aleksey Vladimirovich %D 0 %T Double-sided upsetting of end thickenings on rod blanks %B 0 %9 %! Double-sided upsetting of end thickenings on rod blanks %K %X The known methods of plastic shaping of axisymmetric parts with bilateral end thickenings and the die equipment used for their implementation have a number of significant drawbacks that reduce the quality of manufactured products, increase their cost and limit the technological capabilities of production. As a rule, they provide for alternate plastic shaping of end thickenings. A method is proposed for simultaneous stamping of end thickenings on a bar stock in split dies and a stamping device for its implementation. To establish the power modes of stamping, the simulation of the process under study was performed using the finite element method in the QForm software package. The dependences of the stamping force on the geometric dimensions of the workpiece and friction conditions on the contact surfaces are established. The damageability of the workpiece material made of AA5056 alloy was assessed, and a diagram was obtained to determine the number of required stamping operations. %U https://www.sv-jme.eu/article/double-sided-upsetting-of-end-thickenings-on-rod-blanks/ %0 Journal Article %R %& %P 1 %J Articles in Press %V 0 %N 0 %@ 0039-2480 %8 2023-06-21 %7 2023-06-21
Do, Anh Tu, & Aleksey Vladimirovich Chernyaev. "Double-sided upsetting of end thickenings on rod blanks." Articles in Press [Online], 0.0 (0): . Web. 08 May. 2024
TY - JOUR AU - Do, Anh Tu AU - Chernyaev, Aleksey Vladimirovich PY - 0 TI - Double-sided upsetting of end thickenings on rod blanks JF - Articles in Press DO - KW - N2 - The known methods of plastic shaping of axisymmetric parts with bilateral end thickenings and the die equipment used for their implementation have a number of significant drawbacks that reduce the quality of manufactured products, increase their cost and limit the technological capabilities of production. As a rule, they provide for alternate plastic shaping of end thickenings. A method is proposed for simultaneous stamping of end thickenings on a bar stock in split dies and a stamping device for its implementation. To establish the power modes of stamping, the simulation of the process under study was performed using the finite element method in the QForm software package. The dependences of the stamping force on the geometric dimensions of the workpiece and friction conditions on the contact surfaces are established. The damageability of the workpiece material made of AA5056 alloy was assessed, and a diagram was obtained to determine the number of required stamping operations. UR - https://www.sv-jme.eu/article/double-sided-upsetting-of-end-thickenings-on-rod-blanks/
@article{{}{.}, author = {Do, A., Chernyaev, A.}, title = {Double-sided upsetting of end thickenings on rod blanks}, journal = {Articles in Press}, volume = {0}, number = {0}, year = {0}, doi = {}, url = {https://www.sv-jme.eu/article/double-sided-upsetting-of-end-thickenings-on-rod-blanks/} }
TY - JOUR AU - Do, Anh Tu AU - Chernyaev, Aleksey Vladimirovich PY - 2023/06/21 TI - Double-sided upsetting of end thickenings on rod blanks JF - Articles in Press; Vol 0, No 0 (0): Articles in Press DO - KW - N2 - The known methods of plastic shaping of axisymmetric parts with bilateral end thickenings and the die equipment used for their implementation have a number of significant drawbacks that reduce the quality of manufactured products, increase their cost and limit the technological capabilities of production. As a rule, they provide for alternate plastic shaping of end thickenings. A method is proposed for simultaneous stamping of end thickenings on a bar stock in split dies and a stamping device for its implementation. To establish the power modes of stamping, the simulation of the process under study was performed using the finite element method in the QForm software package. The dependences of the stamping force on the geometric dimensions of the workpiece and friction conditions on the contact surfaces are established. The damageability of the workpiece material made of AA5056 alloy was assessed, and a diagram was obtained to determine the number of required stamping operations. UR - https://www.sv-jme.eu/article/double-sided-upsetting-of-end-thickenings-on-rod-blanks/
Do, Anh Tu, AND Chernyaev, Aleksey Vladimirovich. "Double-sided upsetting of end thickenings on rod blanks" Articles in Press [Online], Volume 0 Number 0 (21 June 2023)
Articles in Press
The known methods of plastic shaping of axisymmetric parts with bilateral end thickenings and the die equipment used for their implementation have a number of significant drawbacks that reduce the quality of manufactured products, increase their cost and limit the technological capabilities of production. As a rule, they provide for alternate plastic shaping of end thickenings. A method is proposed for simultaneous stamping of end thickenings on a bar stock in split dies and a stamping device for its implementation. To establish the power modes of stamping, the simulation of the process under study was performed using the finite element method in the QForm software package. The dependences of the stamping force on the geometric dimensions of the workpiece and friction conditions on the contact surfaces are established. The damageability of the workpiece material made of AA5056 alloy was assessed, and a diagram was obtained to determine the number of required stamping operations.