Numerical Simulation of Stress Relieving of an Austenite Stainless Steel

1589 Ogledov
2092 Prenosov
Izvoz citacije: ABNT
UREVC, Janez ;KOC, Pino ;ŠTOK, Boris .
Numerical Simulation of Stress Relieving of an Austenite Stainless Steel. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 55, n.10, p. 590-598, august 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/numerical-simulation-of-stress-relieving-of-an-austenite-stainless-steel/>. Date accessed: 12 jun. 2024. 
doi:http://dx.doi.org/.
Urevc, J., Koc, P., & Štok, B.
(2009).
Numerical Simulation of Stress Relieving of an Austenite Stainless Steel.
Strojniški vestnik - Journal of Mechanical Engineering, 55(10), 590-598.
doi:http://dx.doi.org/
@article{.,
	author = {Janez  Urevc and Pino  Koc and Boris  Štok},
	title = {Numerical Simulation of Stress Relieving of an Austenite Stainless Steel},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {55},
	number = {10},
	year = {2009},
	keywords = {mechanical properties; modelling and process simulation; stress relieving; viscouselastic-plastic constitutive model; stainless steel; },
	abstract = {An approach to numerical simulation of the annealing process with stress relieving is presented in the paper. For austenite stainless steel 316L (AISI), which exhibits no phase transformation from the melting point to room temperature, a viscous-elastic-plastic constitutive model is elaborated. First, from given experimental data the respective mechanical material parameters as a function of temperature are numerically identified by an inverse procedure. Then, the adequacy of the adopted model and identified material parameters is proven by a numerical simulation of stress relieving in two technological cases: (i) two-stage deep drawing with intermediate stress annealing and, (ii) simplified welding process followed by post weld heat treatment. In both cases the obtained residual stress state reduction is found to be in good agreement with the empirical experience and data provided from literature.},
	issn = {0039-2480},	pages = {590-598},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/numerical-simulation-of-stress-relieving-of-an-austenite-stainless-steel/}
}
Urevc, J.,Koc, P.,Štok, B.
2009 August 55. Numerical Simulation of Stress Relieving of an Austenite Stainless Steel. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 55:10
%A Urevc, Janez 
%A Koc, Pino 
%A Štok, Boris 
%D 2009
%T Numerical Simulation of Stress Relieving of an Austenite Stainless Steel
%B 2009
%9 mechanical properties; modelling and process simulation; stress relieving; viscouselastic-plastic constitutive model; stainless steel; 
%! Numerical Simulation of Stress Relieving of an Austenite Stainless Steel
%K mechanical properties; modelling and process simulation; stress relieving; viscouselastic-plastic constitutive model; stainless steel; 
%X An approach to numerical simulation of the annealing process with stress relieving is presented in the paper. For austenite stainless steel 316L (AISI), which exhibits no phase transformation from the melting point to room temperature, a viscous-elastic-plastic constitutive model is elaborated. First, from given experimental data the respective mechanical material parameters as a function of temperature are numerically identified by an inverse procedure. Then, the adequacy of the adopted model and identified material parameters is proven by a numerical simulation of stress relieving in two technological cases: (i) two-stage deep drawing with intermediate stress annealing and, (ii) simplified welding process followed by post weld heat treatment. In both cases the obtained residual stress state reduction is found to be in good agreement with the empirical experience and data provided from literature.
%U https://www.sv-jme.eu/sl/article/numerical-simulation-of-stress-relieving-of-an-austenite-stainless-steel/
%0 Journal Article
%R 
%& 590
%P 9
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 55
%N 10
%@ 0039-2480
%8 2017-08-21
%7 2017-08-21
Urevc, Janez, Pino  Koc, & Boris  Štok.
"Numerical Simulation of Stress Relieving of an Austenite Stainless Steel." Strojniški vestnik - Journal of Mechanical Engineering [Online], 55.10 (2009): 590-598. Web.  12 Jun. 2024
TY  - JOUR
AU  - Urevc, Janez 
AU  - Koc, Pino 
AU  - Štok, Boris 
PY  - 2009
TI  - Numerical Simulation of Stress Relieving of an Austenite Stainless Steel
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - mechanical properties; modelling and process simulation; stress relieving; viscouselastic-plastic constitutive model; stainless steel; 
N2  - An approach to numerical simulation of the annealing process with stress relieving is presented in the paper. For austenite stainless steel 316L (AISI), which exhibits no phase transformation from the melting point to room temperature, a viscous-elastic-plastic constitutive model is elaborated. First, from given experimental data the respective mechanical material parameters as a function of temperature are numerically identified by an inverse procedure. Then, the adequacy of the adopted model and identified material parameters is proven by a numerical simulation of stress relieving in two technological cases: (i) two-stage deep drawing with intermediate stress annealing and, (ii) simplified welding process followed by post weld heat treatment. In both cases the obtained residual stress state reduction is found to be in good agreement with the empirical experience and data provided from literature.
UR  - https://www.sv-jme.eu/sl/article/numerical-simulation-of-stress-relieving-of-an-austenite-stainless-steel/
@article{{}{.},
	author = {Urevc, J., Koc, P., Štok, B.},
	title = {Numerical Simulation of Stress Relieving of an Austenite Stainless Steel},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {55},
	number = {10},
	year = {2009},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/numerical-simulation-of-stress-relieving-of-an-austenite-stainless-steel/}
}
TY  - JOUR
AU  - Urevc, Janez 
AU  - Koc, Pino 
AU  - Štok, Boris 
PY  - 2017/08/21
TI  - Numerical Simulation of Stress Relieving of an Austenite Stainless Steel
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 55, No 10 (2009): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - mechanical properties, modelling and process simulation, stress relieving, viscouselastic-plastic constitutive model, stainless steel, 
N2  - An approach to numerical simulation of the annealing process with stress relieving is presented in the paper. For austenite stainless steel 316L (AISI), which exhibits no phase transformation from the melting point to room temperature, a viscous-elastic-plastic constitutive model is elaborated. First, from given experimental data the respective mechanical material parameters as a function of temperature are numerically identified by an inverse procedure. Then, the adequacy of the adopted model and identified material parameters is proven by a numerical simulation of stress relieving in two technological cases: (i) two-stage deep drawing with intermediate stress annealing and, (ii) simplified welding process followed by post weld heat treatment. In both cases the obtained residual stress state reduction is found to be in good agreement with the empirical experience and data provided from literature.
UR  - https://www.sv-jme.eu/sl/article/numerical-simulation-of-stress-relieving-of-an-austenite-stainless-steel/
Urevc, Janez, Koc, Pino, AND Štok, Boris.
"Numerical Simulation of Stress Relieving of an Austenite Stainless Steel" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 55 Number 10 (21 August 2017)

Avtorji

Inštitucije

  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia
  • University of Ljubljana, Faculty of Mathematics and Physics, Slovenia
  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 55(2009)10, 590-598
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

An approach to numerical simulation of the annealing process with stress relieving is presented in the paper. For austenite stainless steel 316L (AISI), which exhibits no phase transformation from the melting point to room temperature, a viscous-elastic-plastic constitutive model is elaborated. First, from given experimental data the respective mechanical material parameters as a function of temperature are numerically identified by an inverse procedure. Then, the adequacy of the adopted model and identified material parameters is proven by a numerical simulation of stress relieving in two technological cases: (i) two-stage deep drawing with intermediate stress annealing and, (ii) simplified welding process followed by post weld heat treatment. In both cases the obtained residual stress state reduction is found to be in good agreement with the empirical experience and data provided from literature.

mechanical properties; modelling and process simulation; stress relieving; viscouselastic-plastic constitutive model; stainless steel;