The application of explosive cladding technology in the process of hydraulic-cylinder production

541 Ogledov
189 Prenosov
Izvoz citacije: ABNT
JOVIŠEVIĆ, Vid ;SOKOVIĆ, Mirko .
The application of explosive cladding technology in the process of hydraulic-cylinder production. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 51, n.4, p. 193-203, august 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/sl/article/the-application-of-explosive-cladding-technology-in-the-process-of-hydraulic-cylinder-production/>. Date accessed: 19 jan. 2020. 
doi:http://dx.doi.org/.
Jovišević, V., & Soković, M.
(2005).
The application of explosive cladding technology in the process of hydraulic-cylinder production.
Strojniški vestnik - Journal of Mechanical Engineering, 51(4), 193-203.
doi:http://dx.doi.org/
@article{.,
	author = {Vid  Jovišević and Mirko  Soković},
	title = {The application of explosive cladding technology in the process of hydraulic-cylinder production},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {51},
	number = {4},
	year = {2005},
	keywords = {explosive cladding; hydraulic cylinder; bond strength; bronze-steel interface; },
	abstract = {This paper treats the technologies for glide-pairs forming using bronze cladding and using the sheet-bronze explosive cladding technique over the glide surfaces of a steel hydraulic cylinder. In the paper the microhardness, the microstructure and the bond strength of the interface of a bi-metallic joint on the cross-section of the test hydraulic cylinder were investigated. A parallel results survey of the application of these two technologies is shown based on metallographic and mechanical investigations of the interface between the CuSn6 bronze and the TS5 steel cylinder.},
	issn = {0039-2480},	pages = {193-203},	doi = {},
	url = {https://www.sv-jme.eu/sl/article/the-application-of-explosive-cladding-technology-in-the-process-of-hydraulic-cylinder-production/}
}
Jovišević, V.,Soković, M.
2005 August 51. The application of explosive cladding technology in the process of hydraulic-cylinder production. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 51:4
%A Jovišević, Vid 
%A Soković, Mirko 
%D 2005
%T The application of explosive cladding technology in the process of hydraulic-cylinder production
%B 2005
%9 explosive cladding; hydraulic cylinder; bond strength; bronze-steel interface; 
%! The application of explosive cladding technology in the process of hydraulic-cylinder production
%K explosive cladding; hydraulic cylinder; bond strength; bronze-steel interface; 
%X This paper treats the technologies for glide-pairs forming using bronze cladding and using the sheet-bronze explosive cladding technique over the glide surfaces of a steel hydraulic cylinder. In the paper the microhardness, the microstructure and the bond strength of the interface of a bi-metallic joint on the cross-section of the test hydraulic cylinder were investigated. A parallel results survey of the application of these two technologies is shown based on metallographic and mechanical investigations of the interface between the CuSn6 bronze and the TS5 steel cylinder.
%U https://www.sv-jme.eu/sl/article/the-application-of-explosive-cladding-technology-in-the-process-of-hydraulic-cylinder-production/
%0 Journal Article
%R 
%& 193
%P 11
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 51
%N 4
%@ 0039-2480
%8 2017-08-18
%7 2017-08-18
Jovišević, Vid, & Mirko  Soković.
"The application of explosive cladding technology in the process of hydraulic-cylinder production." Strojniški vestnik - Journal of Mechanical Engineering [Online], 51.4 (2005): 193-203. Web.  19 Jan. 2020
TY  - JOUR
AU  - Jovišević, Vid 
AU  - Soković, Mirko 
PY  - 2005
TI  - The application of explosive cladding technology in the process of hydraulic-cylinder production
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - explosive cladding; hydraulic cylinder; bond strength; bronze-steel interface; 
N2  - This paper treats the technologies for glide-pairs forming using bronze cladding and using the sheet-bronze explosive cladding technique over the glide surfaces of a steel hydraulic cylinder. In the paper the microhardness, the microstructure and the bond strength of the interface of a bi-metallic joint on the cross-section of the test hydraulic cylinder were investigated. A parallel results survey of the application of these two technologies is shown based on metallographic and mechanical investigations of the interface between the CuSn6 bronze and the TS5 steel cylinder.
UR  - https://www.sv-jme.eu/sl/article/the-application-of-explosive-cladding-technology-in-the-process-of-hydraulic-cylinder-production/
@article{{}{.},
	author = {Jovišević, V., Soković, M.},
	title = {The application of explosive cladding technology in the process of hydraulic-cylinder production},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {51},
	number = {4},
	year = {2005},
	doi = {},
	url = {https://www.sv-jme.eu/sl/article/the-application-of-explosive-cladding-technology-in-the-process-of-hydraulic-cylinder-production/}
}
TY  - JOUR
AU  - Jovišević, Vid 
AU  - Soković, Mirko 
PY  - 2017/08/18
TI  - The application of explosive cladding technology in the process of hydraulic-cylinder production
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 51, No 4 (2005): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - explosive cladding, hydraulic cylinder, bond strength, bronze-steel interface, 
N2  - This paper treats the technologies for glide-pairs forming using bronze cladding and using the sheet-bronze explosive cladding technique over the glide surfaces of a steel hydraulic cylinder. In the paper the microhardness, the microstructure and the bond strength of the interface of a bi-metallic joint on the cross-section of the test hydraulic cylinder were investigated. A parallel results survey of the application of these two technologies is shown based on metallographic and mechanical investigations of the interface between the CuSn6 bronze and the TS5 steel cylinder.
UR  - https://www.sv-jme.eu/sl/article/the-application-of-explosive-cladding-technology-in-the-process-of-hydraulic-cylinder-production/
Jovišević, Vid, AND Soković, Mirko.
"The application of explosive cladding technology in the process of hydraulic-cylinder production" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 51 Number 4 (18 August 2017)

Avtorji

Inštitucije

  • University of Banja Luka, Faculty of Mechanical Engineering, Bosnia and Herzegovina
  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia

Informacije o papirju

Strojniški vestnik - Journal of Mechanical Engineering 51(2005)4, 193-203

This paper treats the technologies for glide-pairs forming using bronze cladding and using the sheet-bronze explosive cladding technique over the glide surfaces of a steel hydraulic cylinder. In the paper the microhardness, the microstructure and the bond strength of the interface of a bi-metallic joint on the cross-section of the test hydraulic cylinder were investigated. A parallel results survey of the application of these two technologies is shown based on metallographic and mechanical investigations of the interface between the CuSn6 bronze and the TS5 steel cylinder.

explosive cladding; hydraulic cylinder; bond strength; bronze-steel interface;