JOVIŠEVIĆ, Vid ;SOKOVIĆ, Mirko . The application of explosive cladding technology in the process of hydraulic-cylinder production. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 51, n.4, p. 193-203, august 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/the-application-of-explosive-cladding-technology-in-the-process-of-hydraulic-cylinder-production/>. Date accessed: 15 oct. 2024. doi:http://dx.doi.org/.
Jovišević, V., & Soković, M. (2005). The application of explosive cladding technology in the process of hydraulic-cylinder production. Strojniški vestnik - Journal of Mechanical Engineering, 51(4), 193-203. doi:http://dx.doi.org/
@article{., author = {Vid Jovišević and Mirko Soković}, title = {The application of explosive cladding technology in the process of hydraulic-cylinder production}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {51}, number = {4}, year = {2005}, keywords = {explosive cladding; hydraulic cylinder; bond strength; bronze-steel interface; }, abstract = {This paper treats the technologies for glide-pairs forming using bronze cladding and using the sheet-bronze explosive cladding technique over the glide surfaces of a steel hydraulic cylinder. In the paper the microhardness, the microstructure and the bond strength of the interface of a bi-metallic joint on the cross-section of the test hydraulic cylinder were investigated. A parallel results survey of the application of these two technologies is shown based on metallographic and mechanical investigations of the interface between the CuSn6 bronze and the TS5 steel cylinder.}, issn = {0039-2480}, pages = {193-203}, doi = {}, url = {https://www.sv-jme.eu/article/the-application-of-explosive-cladding-technology-in-the-process-of-hydraulic-cylinder-production/} }
Jovišević, V.,Soković, M. 2005 August 51. The application of explosive cladding technology in the process of hydraulic-cylinder production. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 51:4
%A Jovišević, Vid %A Soković, Mirko %D 2005 %T The application of explosive cladding technology in the process of hydraulic-cylinder production %B 2005 %9 explosive cladding; hydraulic cylinder; bond strength; bronze-steel interface; %! The application of explosive cladding technology in the process of hydraulic-cylinder production %K explosive cladding; hydraulic cylinder; bond strength; bronze-steel interface; %X This paper treats the technologies for glide-pairs forming using bronze cladding and using the sheet-bronze explosive cladding technique over the glide surfaces of a steel hydraulic cylinder. In the paper the microhardness, the microstructure and the bond strength of the interface of a bi-metallic joint on the cross-section of the test hydraulic cylinder were investigated. A parallel results survey of the application of these two technologies is shown based on metallographic and mechanical investigations of the interface between the CuSn6 bronze and the TS5 steel cylinder. %U https://www.sv-jme.eu/article/the-application-of-explosive-cladding-technology-in-the-process-of-hydraulic-cylinder-production/ %0 Journal Article %R %& 193 %P 11 %J Strojniški vestnik - Journal of Mechanical Engineering %V 51 %N 4 %@ 0039-2480 %8 2017-08-18 %7 2017-08-18
Jovišević, Vid, & Mirko Soković. "The application of explosive cladding technology in the process of hydraulic-cylinder production." Strojniški vestnik - Journal of Mechanical Engineering [Online], 51.4 (2005): 193-203. Web. 15 Oct. 2024
TY - JOUR AU - Jovišević, Vid AU - Soković, Mirko PY - 2005 TI - The application of explosive cladding technology in the process of hydraulic-cylinder production JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - explosive cladding; hydraulic cylinder; bond strength; bronze-steel interface; N2 - This paper treats the technologies for glide-pairs forming using bronze cladding and using the sheet-bronze explosive cladding technique over the glide surfaces of a steel hydraulic cylinder. In the paper the microhardness, the microstructure and the bond strength of the interface of a bi-metallic joint on the cross-section of the test hydraulic cylinder were investigated. A parallel results survey of the application of these two technologies is shown based on metallographic and mechanical investigations of the interface between the CuSn6 bronze and the TS5 steel cylinder. UR - https://www.sv-jme.eu/article/the-application-of-explosive-cladding-technology-in-the-process-of-hydraulic-cylinder-production/
@article{{}{.}, author = {Jovišević, V., Soković, M.}, title = {The application of explosive cladding technology in the process of hydraulic-cylinder production}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {51}, number = {4}, year = {2005}, doi = {}, url = {https://www.sv-jme.eu/article/the-application-of-explosive-cladding-technology-in-the-process-of-hydraulic-cylinder-production/} }
TY - JOUR AU - Jovišević, Vid AU - Soković, Mirko PY - 2017/08/18 TI - The application of explosive cladding technology in the process of hydraulic-cylinder production JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 51, No 4 (2005): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - explosive cladding, hydraulic cylinder, bond strength, bronze-steel interface, N2 - This paper treats the technologies for glide-pairs forming using bronze cladding and using the sheet-bronze explosive cladding technique over the glide surfaces of a steel hydraulic cylinder. In the paper the microhardness, the microstructure and the bond strength of the interface of a bi-metallic joint on the cross-section of the test hydraulic cylinder were investigated. A parallel results survey of the application of these two technologies is shown based on metallographic and mechanical investigations of the interface between the CuSn6 bronze and the TS5 steel cylinder. UR - https://www.sv-jme.eu/article/the-application-of-explosive-cladding-technology-in-the-process-of-hydraulic-cylinder-production/
Jovišević, Vid, AND Soković, Mirko. "The application of explosive cladding technology in the process of hydraulic-cylinder production" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 51 Number 4 (18 August 2017)
Strojniški vestnik - Journal of Mechanical Engineering 51(2005)4, 193-203
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
This paper treats the technologies for glide-pairs forming using bronze cladding and using the sheet-bronze explosive cladding technique over the glide surfaces of a steel hydraulic cylinder. In the paper the microhardness, the microstructure and the bond strength of the interface of a bi-metallic joint on the cross-section of the test hydraulic cylinder were investigated. A parallel results survey of the application of these two technologies is shown based on metallographic and mechanical investigations of the interface between the CuSn6 bronze and the TS5 steel cylinder.