Deformation Analysis of Boring Bars Using Analytical and Finite Element Approaches

TAŞKESEN, Ahmet ;MENDI, Faruk ;KISIOGLU, Yasin ;KULEKCI, Mustafa Kemal.
Deformation Analysis of Boring Bars Using Analytical and Finite Element Approaches. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 52, n.3, p. 161-169, august 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/deformation-analysis-of-boring-bars-using-analytical-and-finite-element-approaches/>. Date accessed: 02 feb. 2026. 
doi:http://dx.doi.org/.

taşkesen, A., Mendi, F., Kisioglu, Y., & Kulekci, M.
(2006).
Deformation Analysis of Boring Bars Using Analytical and Finite Element Approaches.
Strojniški vestnik - Journal of Mechanical Engineering, 52(3), 161-169.
doi:http://dx.doi.org/

@article{.,
	author = {Ahmet  taşkesen and Faruk  Mendi and Yasin  Kisioglu and Mustafa Kemal Kulekci},
	title = {Deformation Analysis of Boring Bars Using Analytical and Finite Element Approaches},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {52},
	number = {3},
	year = {2006},
	keywords = {boring bars; boring processes; deformation analysis; finite element methods; },
	abstract = {In this paper we discuss the deformation analyses of boring bars using analytical and finite-element methods. Three types of circular boring bars with HSS and cemented-carbide properties were selected, and their deformations when subjected to oblique boring forces were calculated using both methods. A guideline is proposed for the manufacturer, who can determine the extent of the errors that affect the dimensional tolerance and the surface-finish accuracy of the bored hole produced by the bar bent when subjected to the boring forces. Also, we observed that a conical bar is not an appropriate design for boring a long hole.},
	issn = {0039-2480},	pages = {161-169},	doi = {},
	url = {https://www.sv-jme.eu/article/deformation-analysis-of-boring-bars-using-analytical-and-finite-element-approaches/}
}

taşkesen, A.,Mendi, F.,Kisioglu, Y.,Kulekci, M.
2006 August 52. Deformation Analysis of Boring Bars Using Analytical and Finite Element Approaches. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 52:3

%A taşkesen, Ahmet 
%A Mendi, Faruk 
%A Kisioglu, Yasin 
%A Kulekci, Mustafa Kemal
%D 2006
%T Deformation Analysis of Boring Bars Using Analytical and Finite Element Approaches
%B 2006
%9 boring bars; boring processes; deformation analysis; finite element methods; 
%! Deformation Analysis of Boring Bars Using Analytical and Finite Element Approaches
%K boring bars; boring processes; deformation analysis; finite element methods; 
%X In this paper we discuss the deformation analyses of boring bars using analytical and finite-element methods. Three types of circular boring bars with HSS and cemented-carbide properties were selected, and their deformations when subjected to oblique boring forces were calculated using both methods. A guideline is proposed for the manufacturer, who can determine the extent of the errors that affect the dimensional tolerance and the surface-finish accuracy of the bored hole produced by the bar bent when subjected to the boring forces. Also, we observed that a conical bar is not an appropriate design for boring a long hole.
%U https://www.sv-jme.eu/article/deformation-analysis-of-boring-bars-using-analytical-and-finite-element-approaches/
%0 Journal Article
%R 
%& 161
%P 9
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 52
%N 3
%@ 0039-2480
%8 2017-08-18
%7 2017-08-18

taşkesen, Ahmet, Faruk  Mendi, Yasin  Kisioglu, & Mustafa Kemal Kulekci.
"Deformation Analysis of Boring Bars Using Analytical and Finite Element Approaches." Strojniški vestnik - Journal of Mechanical Engineering [Online], 52.3 (2006): 161-169. Web.  02 Feb. 2026

TY  - JOUR
AU  - taşkesen, Ahmet 
AU  - Mendi, Faruk 
AU  - Kisioglu, Yasin 
AU  - Kulekci, Mustafa Kemal
PY  - 2006
TI  - Deformation Analysis of Boring Bars Using Analytical and Finite Element Approaches
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - boring bars; boring processes; deformation analysis; finite element methods; 
N2  - In this paper we discuss the deformation analyses of boring bars using analytical and finite-element methods. Three types of circular boring bars with HSS and cemented-carbide properties were selected, and their deformations when subjected to oblique boring forces were calculated using both methods. A guideline is proposed for the manufacturer, who can determine the extent of the errors that affect the dimensional tolerance and the surface-finish accuracy of the bored hole produced by the bar bent when subjected to the boring forces. Also, we observed that a conical bar is not an appropriate design for boring a long hole.
UR  - https://www.sv-jme.eu/article/deformation-analysis-of-boring-bars-using-analytical-and-finite-element-approaches/

@article{{}{.},
	author = {taşkesen, A., Mendi, F., Kisioglu, Y., Kulekci, M.},
	title = {Deformation Analysis of Boring Bars Using Analytical and Finite Element Approaches},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {52},
	number = {3},
	year = {2006},
	doi = {},
	url = {https://www.sv-jme.eu/article/deformation-analysis-of-boring-bars-using-analytical-and-finite-element-approaches/}
}

TY  - JOUR
AU  - taşkesen, Ahmet 
AU  - Mendi, Faruk 
AU  - Kisioglu, Yasin 
AU  - Kulekci, Mustafa Kemal
PY  - 2017/08/18
TI  - Deformation Analysis of Boring Bars Using Analytical and Finite Element Approaches
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 52, No 3 (2006): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - boring bars, boring processes, deformation analysis, finite element methods, 
N2  - In this paper we discuss the deformation analyses of boring bars using analytical and finite-element methods. Three types of circular boring bars with HSS and cemented-carbide properties were selected, and their deformations when subjected to oblique boring forces were calculated using both methods. A guideline is proposed for the manufacturer, who can determine the extent of the errors that affect the dimensional tolerance and the surface-finish accuracy of the bored hole produced by the bar bent when subjected to the boring forces. Also, we observed that a conical bar is not an appropriate design for boring a long hole.
UR  - https://www.sv-jme.eu/article/deformation-analysis-of-boring-bars-using-analytical-and-finite-element-approaches/

taşkesen, Ahmet, Mendi, Faruk, Kisioglu, Yasin, AND Kulekci, Mustafa.
"Deformation Analysis of Boring Bars Using Analytical and Finite Element Approaches" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 52 Number 3 (18 August 2017)