Geometric accuracy by 2-D printing model

GALETA, Tomislav ;KLJAJIN, Milan ;KARAKAŠIĆ, Mirko .
Geometric accuracy by 2-D printing model. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 54, n.10, p. 725-733, august 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/geometric-accuracy-by-2-d-printing-model/>. Date accessed: 30 jan. 2026. 
doi:http://dx.doi.org/.

Galeta, T., Kljajin, M., & Karakašić, M.
(2008).
Geometric accuracy by 2-D printing model.
Strojniški vestnik - Journal of Mechanical Engineering, 54(10), 725-733.
doi:http://dx.doi.org/

@article{.,
	author = {Tomislav  Galeta and Milan  Kljajin and Mirko  Karakašić},
	title = {Geometric accuracy by 2-D printing model},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {54},
	number = {10},
	year = {2008},
	keywords = {rapid prototyping; three-dimensional printing; geometric accuracy; },
	abstract = {In order to improve the accuracy of three-dimensional printing (3DP), we carried out a set of experiments on two-dimensional (2-D) printed model. The combinations of three main processing factors were considered for every experiment: layer thickness, building orientation and infiltrant type. The results of experiments provided the appropriate anisotropic scale factor and proved the adequacy of anisotropic scaling. The analysis of results indicates that smaller layer thickness, infiltration with epoxy resin and sample orientation towards building direction of X axis provide better sample accuracy.},
	issn = {0039-2480},	pages = {725-733},	doi = {},
	url = {https://www.sv-jme.eu/article/geometric-accuracy-by-2-d-printing-model/}
}

Galeta, T.,Kljajin, M.,Karakašić, M.
2008 August 54. Geometric accuracy by 2-D printing model. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 54:10

%A Galeta, Tomislav 
%A Kljajin, Milan 
%A Karakašić, Mirko 
%D 2008
%T Geometric accuracy by 2-D printing model
%B 2008
%9 rapid prototyping; three-dimensional printing; geometric accuracy; 
%! Geometric accuracy by 2-D printing model
%K rapid prototyping; three-dimensional printing; geometric accuracy; 
%X In order to improve the accuracy of three-dimensional printing (3DP), we carried out a set of experiments on two-dimensional (2-D) printed model. The combinations of three main processing factors were considered for every experiment: layer thickness, building orientation and infiltrant type. The results of experiments provided the appropriate anisotropic scale factor and proved the adequacy of anisotropic scaling. The analysis of results indicates that smaller layer thickness, infiltration with epoxy resin and sample orientation towards building direction of X axis provide better sample accuracy.
%U https://www.sv-jme.eu/article/geometric-accuracy-by-2-d-printing-model/
%0 Journal Article
%R 
%& 725
%P 9
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 54
%N 10
%@ 0039-2480
%8 2017-08-21
%7 2017-08-21

Galeta, Tomislav, Milan  Kljajin, & Mirko  Karakašić.
"Geometric accuracy by 2-D printing model." Strojniški vestnik - Journal of Mechanical Engineering [Online], 54.10 (2008): 725-733. Web.  30 Jan. 2026

TY  - JOUR
AU  - Galeta, Tomislav 
AU  - Kljajin, Milan 
AU  - Karakašić, Mirko 
PY  - 2008
TI  - Geometric accuracy by 2-D printing model
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - rapid prototyping; three-dimensional printing; geometric accuracy; 
N2  - In order to improve the accuracy of three-dimensional printing (3DP), we carried out a set of experiments on two-dimensional (2-D) printed model. The combinations of three main processing factors were considered for every experiment: layer thickness, building orientation and infiltrant type. The results of experiments provided the appropriate anisotropic scale factor and proved the adequacy of anisotropic scaling. The analysis of results indicates that smaller layer thickness, infiltration with epoxy resin and sample orientation towards building direction of X axis provide better sample accuracy.
UR  - https://www.sv-jme.eu/article/geometric-accuracy-by-2-d-printing-model/

@article{{}{.},
	author = {Galeta, T., Kljajin, M., Karakašić, M.},
	title = {Geometric accuracy by 2-D printing model},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {54},
	number = {10},
	year = {2008},
	doi = {},
	url = {https://www.sv-jme.eu/article/geometric-accuracy-by-2-d-printing-model/}
}

TY  - JOUR
AU  - Galeta, Tomislav 
AU  - Kljajin, Milan 
AU  - Karakašić, Mirko 
PY  - 2017/08/21
TI  - Geometric accuracy by 2-D printing model
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 54, No 10 (2008): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - rapid prototyping, three-dimensional printing, geometric accuracy, 
N2  - In order to improve the accuracy of three-dimensional printing (3DP), we carried out a set of experiments on two-dimensional (2-D) printed model. The combinations of three main processing factors were considered for every experiment: layer thickness, building orientation and infiltrant type. The results of experiments provided the appropriate anisotropic scale factor and proved the adequacy of anisotropic scaling. The analysis of results indicates that smaller layer thickness, infiltration with epoxy resin and sample orientation towards building direction of X axis provide better sample accuracy.
UR  - https://www.sv-jme.eu/article/geometric-accuracy-by-2-d-printing-model/

Galeta, Tomislav, Kljajin, Milan, AND Karakašić, Mirko.
"Geometric accuracy by 2-D printing model" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 54 Number 10 (21 August 2017)