LI, Zhengfang ;DI, Xudong ;GAO, Zhengyuan ;AN, Zhiguo ;CHEN, Ling ;ZHANG, Yuhang ;LU, Shihong . Retracted: Improvement of the Dimensional Accuracy of a Ti-6Al-4V Ripple Disc During Electric Hot Incremental Sheet Forming. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 70, n.1-2, p. 20-26, september 2023. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/improvement-of-dimensional-accuracy-of-ti-6al-4v-ripple-disc-during-electric-hot-incremental-sheet-forming/>. Date accessed: 24 may. 2025. doi:http://dx.doi.org/10.5545/sv-jme.2023.545.
Li, Z., Di, X., Gao, Z., An, Z., Chen, L., Zhang, Y., & Lu, S. (2024). Retracted: Improvement of the Dimensional Accuracy of a Ti-6Al-4V Ripple Disc During Electric Hot Incremental Sheet Forming. Strojniški vestnik - Journal of Mechanical Engineering, 70(1-2), 20-26. doi:http://dx.doi.org/10.5545/sv-jme.2023.545
@article{sv-jmesv-jme.2023.545,
author = {Zhengfang Li and Xudong Di and Zhengyuan Gao and Zhiguo An and Ling Chen and Yuhang Zhang and Shihong Lu},
title = {Retracted: Improvement of the Dimensional Accuracy of a Ti-6Al-4V Ripple Disc During Electric Hot Incremental Sheet Forming},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {70},
number = {1-2},
year = {2024},
keywords = {Incremental sheet forming; Electric hot forming; Electrically assisted sizing; Edge warpage; Ripple disc; },
abstract = {The edge warpage of a Ti-6Al-4V ripple disc is a major forming defect during electric hot incremental forming, which can lead to a significant dimensional error. In this paper, a novel manufacturing method, namely the combination of electric hot incremental forming and electrically assisted sizing, has been proposed to improve the forming defect. The effect of process parameters on forming fracture was analysed in detail, and then an optimal combination of process parameters was obtained to ensure the successful forming of a Ti-6Al-4V ripple disc. On this basis, a sizing device and a sizing current were separately designed and analysed to eliminate the warpage defect of Ti-6Al-4V ripple discs. According to the experimental result, Ti-6Al-4V ripple discs can be satisfactorily fabricated through the method proposed.},
issn = {0039-2480}, pages = {20-26}, doi = {10.5545/sv-jme.2023.545},
url = {https://www.sv-jme.eu/article/improvement-of-dimensional-accuracy-of-ti-6al-4v-ripple-disc-during-electric-hot-incremental-sheet-forming/}
}
Li, Z.,Di, X.,Gao, Z.,An, Z.,Chen, L.,Zhang, Y.,Lu, S. 2024 September 70. Retracted: Improvement of the Dimensional Accuracy of a Ti-6Al-4V Ripple Disc During Electric Hot Incremental Sheet Forming. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 70:1-2
%A Li, Zhengfang %A Di, Xudong %A Gao, Zhengyuan %A An, Zhiguo %A Chen, Ling %A Zhang, Yuhang %A Lu, Shihong %D 2024 %T Retracted: Improvement of the Dimensional Accuracy of a Ti-6Al-4V Ripple Disc During Electric Hot Incremental Sheet Forming %B 2024 %9 Incremental sheet forming; Electric hot forming; Electrically assisted sizing; Edge warpage; Ripple disc; %! Retracted: Improvement of the Dimensional Accuracy of a Ti-6Al-4V Ripple Disc During Electric Hot Incremental Sheet Forming %K Incremental sheet forming; Electric hot forming; Electrically assisted sizing; Edge warpage; Ripple disc; %X The edge warpage of a Ti-6Al-4V ripple disc is a major forming defect during electric hot incremental forming, which can lead to a significant dimensional error. In this paper, a novel manufacturing method, namely the combination of electric hot incremental forming and electrically assisted sizing, has been proposed to improve the forming defect. The effect of process parameters on forming fracture was analysed in detail, and then an optimal combination of process parameters was obtained to ensure the successful forming of a Ti-6Al-4V ripple disc. On this basis, a sizing device and a sizing current were separately designed and analysed to eliminate the warpage defect of Ti-6Al-4V ripple discs. According to the experimental result, Ti-6Al-4V ripple discs can be satisfactorily fabricated through the method proposed. %U https://www.sv-jme.eu/article/improvement-of-dimensional-accuracy-of-ti-6al-4v-ripple-disc-during-electric-hot-incremental-sheet-forming/ %0 Journal Article %R 10.5545/sv-jme.2023.545 %& 20 %P 7 %J Strojniški vestnik - Journal of Mechanical Engineering %V 70 %N 1-2 %@ 0039-2480 %8 2023-09-15 %7 2023-09-15
Li, Zhengfang, Xudong Di, Zhengyuan Gao, Zhiguo An, Ling Chen, Yuhang Zhang, & Shihong Lu. "Retracted: Improvement of the Dimensional Accuracy of a Ti-6Al-4V Ripple Disc During Electric Hot Incremental Sheet Forming." Strojniški vestnik - Journal of Mechanical Engineering [Online], 70.1-2 (2024): 20-26. Web. 24 May. 2025
TY - JOUR AU - Li, Zhengfang AU - Di, Xudong AU - Gao, Zhengyuan AU - An, Zhiguo AU - Chen, Ling AU - Zhang, Yuhang AU - Lu, Shihong PY - 2024 TI - Retracted: Improvement of the Dimensional Accuracy of a Ti-6Al-4V Ripple Disc During Electric Hot Incremental Sheet Forming JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2023.545 KW - Incremental sheet forming; Electric hot forming; Electrically assisted sizing; Edge warpage; Ripple disc; N2 - The edge warpage of a Ti-6Al-4V ripple disc is a major forming defect during electric hot incremental forming, which can lead to a significant dimensional error. In this paper, a novel manufacturing method, namely the combination of electric hot incremental forming and electrically assisted sizing, has been proposed to improve the forming defect. The effect of process parameters on forming fracture was analysed in detail, and then an optimal combination of process parameters was obtained to ensure the successful forming of a Ti-6Al-4V ripple disc. On this basis, a sizing device and a sizing current were separately designed and analysed to eliminate the warpage defect of Ti-6Al-4V ripple discs. According to the experimental result, Ti-6Al-4V ripple discs can be satisfactorily fabricated through the method proposed. UR - https://www.sv-jme.eu/article/improvement-of-dimensional-accuracy-of-ti-6al-4v-ripple-disc-during-electric-hot-incremental-sheet-forming/
@article{{sv-jme}{sv-jme.2023.545},
author = {Li, Z., Di, X., Gao, Z., An, Z., Chen, L., Zhang, Y., Lu, S.},
title = {Retracted: Improvement of the Dimensional Accuracy of a Ti-6Al-4V Ripple Disc During Electric Hot Incremental Sheet Forming},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {70},
number = {1-2},
year = {2024},
doi = {10.5545/sv-jme.2023.545},
url = {https://www.sv-jme.eu/article/improvement-of-dimensional-accuracy-of-ti-6al-4v-ripple-disc-during-electric-hot-incremental-sheet-forming/}
}
TY - JOUR AU - Li, Zhengfang AU - Di, Xudong AU - Gao, Zhengyuan AU - An, Zhiguo AU - Chen, Ling AU - Zhang, Yuhang AU - Lu, Shihong PY - 2023/09/15 TI - Retracted: Improvement of the Dimensional Accuracy of a Ti-6Al-4V Ripple Disc During Electric Hot Incremental Sheet Forming JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 70, No 1-2 (2024): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2023.545 KW - Incremental sheet forming, Electric hot forming, Electrically assisted sizing, Edge warpage, Ripple disc, N2 - The edge warpage of a Ti-6Al-4V ripple disc is a major forming defect during electric hot incremental forming, which can lead to a significant dimensional error. In this paper, a novel manufacturing method, namely the combination of electric hot incremental forming and electrically assisted sizing, has been proposed to improve the forming defect. The effect of process parameters on forming fracture was analysed in detail, and then an optimal combination of process parameters was obtained to ensure the successful forming of a Ti-6Al-4V ripple disc. On this basis, a sizing device and a sizing current were separately designed and analysed to eliminate the warpage defect of Ti-6Al-4V ripple discs. According to the experimental result, Ti-6Al-4V ripple discs can be satisfactorily fabricated through the method proposed. UR - https://www.sv-jme.eu/article/improvement-of-dimensional-accuracy-of-ti-6al-4v-ripple-disc-during-electric-hot-incremental-sheet-forming/
Li, Zhengfang, Di, Xudong, Gao, Zhengyuan , An, Zhiguo , Chen, Ling, Zhang, Yuhang, AND Lu, Shihong. "Retracted: Improvement of the Dimensional Accuracy of a Ti-6Al-4V Ripple Disc During Electric Hot Incremental Sheet Forming" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 70 Number 1-2 (15 September 2023)
Strojniški vestnik - Journal of Mechanical Engineering 70(2024)1-2, 20-26
© The Authors 2024. CC BY 4.0 Int.
This article has been retracted. Please see COPE policy on Article Retraction (https://publicationethics.org/guidance/guideline/retraction-guidelines).
This article has been retracted at the request of the Authors. Following concerns raised by the authors, an investigation of this paper was undertaken by the editors. The authors provided the reasons for a retraction request: “In this paper, the figures of the paper have been published in a thesis of Xudong Di entitled “Investigation on Incremental Forming Process of Titanium Alloy Corrugated Disk Using Current Assisted” by Nanjing University of Aeronautics and Astronautics, The Graduate School, College of Mechanical and Electrical Engineering, and the evidence of significant deficiencies is shown in Figs. 1-4. Therefore, the paper published has significant deficiencies. To maintain academic integrity, all authors agree to retract the paper.”
The edge warpage of a Ti-6Al-4V ripple disc is a major forming defect during electric hot incremental forming, which can lead to a significant dimensional error. In this paper, a novel manufacturing method, namely the combination of electric hot incremental forming and electrically assisted sizing, has been proposed to improve the forming defect. The effect of process parameters on forming fracture was analysed in detail, and then an optimal combination of process parameters was obtained to ensure the successful forming of a Ti-6Al-4V ripple disc. On this basis, a sizing device and a sizing current were separately designed and analysed to eliminate the warpage defect of Ti-6Al-4V ripple discs. According to the experimental result, Ti-6Al-4V ripple discs can be satisfactorily fabricated through the method proposed.