LEGAT, Janko ;PRIMEC, Čedomir ;GUBELJAK, Nenad .
The Determination of Elasto-Plastic Fracture Mechanics Resistance Curves on Bend Specimen with Shallow and Deep Cracks.
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 40, n.5-6, p. 193-200, november 2017.
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/the-determination-of-elasto-plastlc-fracture-mechanics-resistance-curves-on-bend-specimen-with-shallow-and-deep-cracks/>. Date accessed: 22 jan. 2026.
doi:http://dx.doi.org/.
Legat, J., Primec, ., & Gubeljak, N.
(1994).
The Determination of Elasto-Plastic Fracture Mechanics Resistance Curves on Bend Specimen with Shallow and Deep Cracks.
Strojniški vestnik - Journal of Mechanical Engineering, 40(5-6), 193-200.
doi:http://dx.doi.org/
@article{.,
author = {Janko Legat and Čedomir Primec and Nenad Gubeljak},
title = {The Determination of Elasto-Plastic Fracture Mechanics Resistance Curves on Bend Specimen with Shallow and Deep Cracks},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {40},
number = {5-6},
year = {1994},
keywords = {Elasto-Plastlc Fracture; Resistance Curves; Bend Specimen; },
abstract = {The aim of this paper is to present a part of an experimental program being carried out to study size and geometry effects on CTOD and J resistance curves. The material selected for this investigation was high strength low alloy (HSLA) steel, called NIONICRAL 70A produced by Steelworks Jesenice In Slovenia. The experiments were performed on various single edge notch bend (SENB) specimens with different crack depth to specimen width ratla (a/W). The unloading compliance and the DC potential drop methods to determine the crack growth during the test were used.},
issn = {0039-2480}, pages = {193-200}, doi = {},
url = {https://www.sv-jme.eu/article/the-determination-of-elasto-plastlc-fracture-mechanics-resistance-curves-on-bend-specimen-with-shallow-and-deep-cracks/}
}
Legat, J.,Primec, .,Gubeljak, N.
1994 November 40. The Determination of Elasto-Plastic Fracture Mechanics Resistance Curves on Bend Specimen with Shallow and Deep Cracks. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 40:5-6
%A Legat, Janko
%A Primec, Čedomir
%A Gubeljak, Nenad
%D 1994
%T The Determination of Elasto-Plastic Fracture Mechanics Resistance Curves on Bend Specimen with Shallow and Deep Cracks
%B 1994
%9 Elasto-Plastlc Fracture; Resistance Curves; Bend Specimen;
%! The Determination of Elasto-Plastic Fracture Mechanics Resistance Curves on Bend Specimen with Shallow and Deep Cracks
%K Elasto-Plastlc Fracture; Resistance Curves; Bend Specimen;
%X The aim of this paper is to present a part of an experimental program being carried out to study size and geometry effects on CTOD and J resistance curves. The material selected for this investigation was high strength low alloy (HSLA) steel, called NIONICRAL 70A produced by Steelworks Jesenice In Slovenia. The experiments were performed on various single edge notch bend (SENB) specimens with different crack depth to specimen width ratla (a/W). The unloading compliance and the DC potential drop methods to determine the crack growth during the test were used.
%U https://www.sv-jme.eu/article/the-determination-of-elasto-plastlc-fracture-mechanics-resistance-curves-on-bend-specimen-with-shallow-and-deep-cracks/
%0 Journal Article
%R
%& 193
%P 8
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 40
%N 5-6
%@ 0039-2480
%8 2017-11-11
%7 2017-11-11
Legat, Janko, Čedomir Primec, & Nenad Gubeljak.
"The Determination of Elasto-Plastic Fracture Mechanics Resistance Curves on Bend Specimen with Shallow and Deep Cracks." Strojniški vestnik - Journal of Mechanical Engineering [Online], 40.5-6 (1994): 193-200. Web. 22 Jan. 2026
TY - JOUR
AU - Legat, Janko
AU - Primec, Čedomir
AU - Gubeljak, Nenad
PY - 1994
TI - The Determination of Elasto-Plastic Fracture Mechanics Resistance Curves on Bend Specimen with Shallow and Deep Cracks
JF - Strojniški vestnik - Journal of Mechanical Engineering
DO -
KW - Elasto-Plastlc Fracture; Resistance Curves; Bend Specimen;
N2 - The aim of this paper is to present a part of an experimental program being carried out to study size and geometry effects on CTOD and J resistance curves. The material selected for this investigation was high strength low alloy (HSLA) steel, called NIONICRAL 70A produced by Steelworks Jesenice In Slovenia. The experiments were performed on various single edge notch bend (SENB) specimens with different crack depth to specimen width ratla (a/W). The unloading compliance and the DC potential drop methods to determine the crack growth during the test were used.
UR - https://www.sv-jme.eu/article/the-determination-of-elasto-plastlc-fracture-mechanics-resistance-curves-on-bend-specimen-with-shallow-and-deep-cracks/
@article{{}{.},
author = {Legat, J., Primec, ., Gubeljak, N.},
title = {The Determination of Elasto-Plastic Fracture Mechanics Resistance Curves on Bend Specimen with Shallow and Deep Cracks},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {40},
number = {5-6},
year = {1994},
doi = {},
url = {https://www.sv-jme.eu/article/the-determination-of-elasto-plastlc-fracture-mechanics-resistance-curves-on-bend-specimen-with-shallow-and-deep-cracks/}
}
TY - JOUR
AU - Legat, Janko
AU - Primec, Čedomir
AU - Gubeljak, Nenad
PY - 2017/11/11
TI - The Determination of Elasto-Plastic Fracture Mechanics Resistance Curves on Bend Specimen with Shallow and Deep Cracks
JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 40, No 5-6 (1994): Strojniški vestnik - Journal of Mechanical Engineering
DO -
KW - Elasto-Plastlc Fracture, Resistance Curves, Bend Specimen,
N2 - The aim of this paper is to present a part of an experimental program being carried out to study size and geometry effects on CTOD and J resistance curves. The material selected for this investigation was high strength low alloy (HSLA) steel, called NIONICRAL 70A produced by Steelworks Jesenice In Slovenia. The experiments were performed on various single edge notch bend (SENB) specimens with different crack depth to specimen width ratla (a/W). The unloading compliance and the DC potential drop methods to determine the crack growth during the test were used.
UR - https://www.sv-jme.eu/article/the-determination-of-elasto-plastlc-fracture-mechanics-resistance-curves-on-bend-specimen-with-shallow-and-deep-cracks/
Legat, Janko, Primec, Čedomir, AND Gubeljak, Nenad.
"The Determination of Elasto-Plastic Fracture Mechanics Resistance Curves on Bend Specimen with Shallow and Deep Cracks" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 40 Number 5-6 (11 November 2017)
