A Production Planning and Control System Selection Procedure

1844 Views
1021 Downloads
Export citation: ABNT
STARBEK, Marko ;GRUM, Janez .
A Production Planning and Control System Selection Procedure. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 46, n.2, p. 77-89, july 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/a-production-planning-and-control-system-selection-procedure/>. Date accessed: 04 oct. 2024. 
doi:http://dx.doi.org/.
Starbek, M., & Grum, J.
(2000).
A Production Planning and Control System Selection Procedure.
Strojniški vestnik - Journal of Mechanical Engineering, 46(2), 77-89.
doi:http://dx.doi.org/
@article{.,
	author = {Marko  Starbek and Janez  Grum},
	title = {A Production Planning and Control System Selection Procedure},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {46},
	number = {2},
	year = {2000},
	keywords = {PPC system; benefits; system functions; system structure; },
	abstract = {The basic task of a production planning and contorl (PPC) system is to solve the complex tasks of production planning and control in a company. There are several computer-aided PPC systems commercially available, and companies find it difficult to select the optimal system from the wide variety of systems available on the market. This paper presents the general structure of a PPC system, showing the logical execution sequence of production planning and contorl tasks, and describes a two-phase selection of an optimal PPC system. The two-phase procedure of selecting an optimal PPC system was tested in a company that produces locks and metal parts. Based on the test results the company management selected the optimal PPC system. },
	issn = {0039-2480},	pages = {77-89},	doi = {},
	url = {https://www.sv-jme.eu/article/a-production-planning-and-control-system-selection-procedure/}
}
Starbek, M.,Grum, J.
2000 July 46. A Production Planning and Control System Selection Procedure. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 46:2
%A Starbek, Marko 
%A Grum, Janez 
%D 2000
%T A Production Planning and Control System Selection Procedure
%B 2000
%9 PPC system; benefits; system functions; system structure; 
%! A Production Planning and Control System Selection Procedure
%K PPC system; benefits; system functions; system structure; 
%X The basic task of a production planning and contorl (PPC) system is to solve the complex tasks of production planning and control in a company. There are several computer-aided PPC systems commercially available, and companies find it difficult to select the optimal system from the wide variety of systems available on the market. This paper presents the general structure of a PPC system, showing the logical execution sequence of production planning and contorl tasks, and describes a two-phase selection of an optimal PPC system. The two-phase procedure of selecting an optimal PPC system was tested in a company that produces locks and metal parts. Based on the test results the company management selected the optimal PPC system. 
%U https://www.sv-jme.eu/article/a-production-planning-and-control-system-selection-procedure/
%0 Journal Article
%R 
%& 77
%P 13
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 46
%N 2
%@ 0039-2480
%8 2017-07-07
%7 2017-07-07
Starbek, Marko, & Janez  Grum.
"A Production Planning and Control System Selection Procedure." Strojniški vestnik - Journal of Mechanical Engineering [Online], 46.2 (2000): 77-89. Web.  04 Oct. 2024
TY  - JOUR
AU  - Starbek, Marko 
AU  - Grum, Janez 
PY  - 2000
TI  - A Production Planning and Control System Selection Procedure
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - PPC system; benefits; system functions; system structure; 
N2  - The basic task of a production planning and contorl (PPC) system is to solve the complex tasks of production planning and control in a company. There are several computer-aided PPC systems commercially available, and companies find it difficult to select the optimal system from the wide variety of systems available on the market. This paper presents the general structure of a PPC system, showing the logical execution sequence of production planning and contorl tasks, and describes a two-phase selection of an optimal PPC system. The two-phase procedure of selecting an optimal PPC system was tested in a company that produces locks and metal parts. Based on the test results the company management selected the optimal PPC system. 
UR  - https://www.sv-jme.eu/article/a-production-planning-and-control-system-selection-procedure/
@article{{}{.},
	author = {Starbek, M., Grum, J.},
	title = {A Production Planning and Control System Selection Procedure},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {46},
	number = {2},
	year = {2000},
	doi = {},
	url = {https://www.sv-jme.eu/article/a-production-planning-and-control-system-selection-procedure/}
}
TY  - JOUR
AU  - Starbek, Marko 
AU  - Grum, Janez 
PY  - 2017/07/07
TI  - A Production Planning and Control System Selection Procedure
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 46, No 2 (2000): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - PPC system, benefits, system functions, system structure, 
N2  - The basic task of a production planning and contorl (PPC) system is to solve the complex tasks of production planning and control in a company. There are several computer-aided PPC systems commercially available, and companies find it difficult to select the optimal system from the wide variety of systems available on the market. This paper presents the general structure of a PPC system, showing the logical execution sequence of production planning and contorl tasks, and describes a two-phase selection of an optimal PPC system. The two-phase procedure of selecting an optimal PPC system was tested in a company that produces locks and metal parts. Based on the test results the company management selected the optimal PPC system. 
UR  - https://www.sv-jme.eu/article/a-production-planning-and-control-system-selection-procedure/
Starbek, Marko, AND Grum, Janez.
"A Production Planning and Control System Selection Procedure" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 46 Number 2 (07 July 2017)

Authors

Affiliations

  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia
  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 46(2000)2, 77-89
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

The basic task of a production planning and contorl (PPC) system is to solve the complex tasks of production planning and control in a company. There are several computer-aided PPC systems commercially available, and companies find it difficult to select the optimal system from the wide variety of systems available on the market. This paper presents the general structure of a PPC system, showing the logical execution sequence of production planning and contorl tasks, and describes a two-phase selection of an optimal PPC system. The two-phase procedure of selecting an optimal PPC system was tested in a company that produces locks and metal parts. Based on the test results the company management selected the optimal PPC system. 

PPC system; benefits; system functions; system structure;