LIU, Yanxiong ;SHU, Yuwen ;HU, Wentao ;ZHAO, Xinhao ;XU, Zhicheng . Active Vibration Control of a Mechanical Servo High-speed Fine-Blanking Press. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 67, n.9, p. 445-457, september 2021. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/active-vibration-control-of-mechanical-servo-high-speed-fine-blanking-press/>. Date accessed: 01 dec. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2020.6959.
Liu, Y., Shu, Y., Hu, W., Zhao, X., & Xu, Z. (2021). Active Vibration Control of a Mechanical Servo High-speed Fine-Blanking Press. Strojniški vestnik - Journal of Mechanical Engineering, 67(9), 445-457. doi:http://dx.doi.org/10.5545/sv-jme.2020.6959
@article{sv-jmesv-jme.2020.6959, author = {Yanxiong Liu and Yuwen Shu and Wentao Hu and Xinhao Zhao and Zhicheng Xu}, title = {Active Vibration Control of a Mechanical Servo High-speed Fine-Blanking Press}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {67}, number = {9}, year = {2021}, keywords = {active vibration control; mechanical vibration model; mechanical servo high-speed fine-blanking press; self-adaptive feed-forward control}, abstract = {The fine-blanking process as an advanced sheet metal forming process has been widely applied in industry. However, specially designed equipment is required for this process. In this paper, a novel mechanical servo high-speed fine-blanking press with the capacity of 3200 kN is proposed, and the vibration control for this machine is researched to achieve the requirement of fine-blanked parts of high dimensional accuracy, since the vibration of the fine-blanking machine will cause the machining displacement error and reduce the machining accuracy. Self-adaptive feed-forward control is used to simulate the active vibration control of the mechanical fine-blanking machine. The vibration control principle of the fine-blanking machine is described, and the control algorithm is established. At the same time, the mechanical vibration model of the fine-blanking machine as the controlled object is established, and the parameters of the excitation input and the mechanical model are obtained by the fine-blanking finite element simulation and the experiments of the vibration measurement of the press. Finally, the numerical simulation and analysis of active vibration control based on MATLAB are carried out. The results show that the control effect is good, and the vibration response is effectively reduced, thus greatly increasing the processing accuracy, saving a significant amount of energy, and reducing the energy consumption and defective rate.}, issn = {0039-2480}, pages = {445-457}, doi = {10.5545/sv-jme.2020.6959}, url = {https://www.sv-jme.eu/article/active-vibration-control-of-mechanical-servo-high-speed-fine-blanking-press/} }
Liu, Y.,Shu, Y.,Hu, W.,Zhao, X.,Xu, Z. 2021 September 67. Active Vibration Control of a Mechanical Servo High-speed Fine-Blanking Press. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 67:9
%A Liu, Yanxiong %A Shu, Yuwen %A Hu, Wentao %A Zhao, Xinhao %A Xu, Zhicheng %D 2021 %T Active Vibration Control of a Mechanical Servo High-speed Fine-Blanking Press %B 2021 %9 active vibration control; mechanical vibration model; mechanical servo high-speed fine-blanking press; self-adaptive feed-forward control %! Active Vibration Control of a Mechanical Servo High-speed Fine-Blanking Press %K active vibration control; mechanical vibration model; mechanical servo high-speed fine-blanking press; self-adaptive feed-forward control %X The fine-blanking process as an advanced sheet metal forming process has been widely applied in industry. However, specially designed equipment is required for this process. In this paper, a novel mechanical servo high-speed fine-blanking press with the capacity of 3200 kN is proposed, and the vibration control for this machine is researched to achieve the requirement of fine-blanked parts of high dimensional accuracy, since the vibration of the fine-blanking machine will cause the machining displacement error and reduce the machining accuracy. Self-adaptive feed-forward control is used to simulate the active vibration control of the mechanical fine-blanking machine. The vibration control principle of the fine-blanking machine is described, and the control algorithm is established. At the same time, the mechanical vibration model of the fine-blanking machine as the controlled object is established, and the parameters of the excitation input and the mechanical model are obtained by the fine-blanking finite element simulation and the experiments of the vibration measurement of the press. Finally, the numerical simulation and analysis of active vibration control based on MATLAB are carried out. The results show that the control effect is good, and the vibration response is effectively reduced, thus greatly increasing the processing accuracy, saving a significant amount of energy, and reducing the energy consumption and defective rate. %U https://www.sv-jme.eu/article/active-vibration-control-of-mechanical-servo-high-speed-fine-blanking-press/ %0 Journal Article %R 10.5545/sv-jme.2020.6959 %& 445 %P 13 %J Strojniški vestnik - Journal of Mechanical Engineering %V 67 %N 9 %@ 0039-2480 %8 2021-09-28 %7 2021-09-28
Liu, Yanxiong, Yuwen Shu, Wentao Hu, Xinhao Zhao, & Zhicheng Xu. "Active Vibration Control of a Mechanical Servo High-speed Fine-Blanking Press." Strojniški vestnik - Journal of Mechanical Engineering [Online], 67.9 (2021): 445-457. Web. 01 Dec. 2024
TY - JOUR AU - Liu, Yanxiong AU - Shu, Yuwen AU - Hu, Wentao AU - Zhao, Xinhao AU - Xu, Zhicheng PY - 2021 TI - Active Vibration Control of a Mechanical Servo High-speed Fine-Blanking Press JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2020.6959 KW - active vibration control; mechanical vibration model; mechanical servo high-speed fine-blanking press; self-adaptive feed-forward control N2 - The fine-blanking process as an advanced sheet metal forming process has been widely applied in industry. However, specially designed equipment is required for this process. In this paper, a novel mechanical servo high-speed fine-blanking press with the capacity of 3200 kN is proposed, and the vibration control for this machine is researched to achieve the requirement of fine-blanked parts of high dimensional accuracy, since the vibration of the fine-blanking machine will cause the machining displacement error and reduce the machining accuracy. Self-adaptive feed-forward control is used to simulate the active vibration control of the mechanical fine-blanking machine. The vibration control principle of the fine-blanking machine is described, and the control algorithm is established. At the same time, the mechanical vibration model of the fine-blanking machine as the controlled object is established, and the parameters of the excitation input and the mechanical model are obtained by the fine-blanking finite element simulation and the experiments of the vibration measurement of the press. Finally, the numerical simulation and analysis of active vibration control based on MATLAB are carried out. The results show that the control effect is good, and the vibration response is effectively reduced, thus greatly increasing the processing accuracy, saving a significant amount of energy, and reducing the energy consumption and defective rate. UR - https://www.sv-jme.eu/article/active-vibration-control-of-mechanical-servo-high-speed-fine-blanking-press/
@article{{sv-jme}{sv-jme.2020.6959}, author = {Liu, Y., Shu, Y., Hu, W., Zhao, X., Xu, Z.}, title = {Active Vibration Control of a Mechanical Servo High-speed Fine-Blanking Press}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {67}, number = {9}, year = {2021}, doi = {10.5545/sv-jme.2020.6959}, url = {https://www.sv-jme.eu/article/active-vibration-control-of-mechanical-servo-high-speed-fine-blanking-press/} }
TY - JOUR AU - Liu, Yanxiong AU - Shu, Yuwen AU - Hu, Wentao AU - Zhao, Xinhao AU - Xu, Zhicheng PY - 2021/09/28 TI - Active Vibration Control of a Mechanical Servo High-speed Fine-Blanking Press JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 67, No 9 (2021): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2020.6959 KW - active vibration control, mechanical vibration model, mechanical servo high-speed fine-blanking press, self-adaptive feed-forward control N2 - The fine-blanking process as an advanced sheet metal forming process has been widely applied in industry. However, specially designed equipment is required for this process. In this paper, a novel mechanical servo high-speed fine-blanking press with the capacity of 3200 kN is proposed, and the vibration control for this machine is researched to achieve the requirement of fine-blanked parts of high dimensional accuracy, since the vibration of the fine-blanking machine will cause the machining displacement error and reduce the machining accuracy. Self-adaptive feed-forward control is used to simulate the active vibration control of the mechanical fine-blanking machine. The vibration control principle of the fine-blanking machine is described, and the control algorithm is established. At the same time, the mechanical vibration model of the fine-blanking machine as the controlled object is established, and the parameters of the excitation input and the mechanical model are obtained by the fine-blanking finite element simulation and the experiments of the vibration measurement of the press. Finally, the numerical simulation and analysis of active vibration control based on MATLAB are carried out. The results show that the control effect is good, and the vibration response is effectively reduced, thus greatly increasing the processing accuracy, saving a significant amount of energy, and reducing the energy consumption and defective rate. UR - https://www.sv-jme.eu/article/active-vibration-control-of-mechanical-servo-high-speed-fine-blanking-press/
Liu, Yanxiong, Shu, Yuwen, Hu, Wentao, Zhao, Xinhao, AND Xu, Zhicheng. "Active Vibration Control of a Mechanical Servo High-speed Fine-Blanking Press" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 67 Number 9 (28 September 2021)
Strojniški vestnik - Journal of Mechanical Engineering 67(2021)9, 445-457
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The fine-blanking process as an advanced sheet metal forming process has been widely applied in industry. However, specially designed equipment is required for this process. In this paper, a novel mechanical servo high-speed fine-blanking press with the capacity of 3200 kN is proposed, and the vibration control for this machine is researched to achieve the requirement of fine-blanked parts of high dimensional accuracy, since the vibration of the fine-blanking machine will cause the machining displacement error and reduce the machining accuracy. Self-adaptive feed-forward control is used to simulate the active vibration control of the mechanical fine-blanking machine. The vibration control principle of the fine-blanking machine is described, and the control algorithm is established. At the same time, the mechanical vibration model of the fine-blanking machine as the controlled object is established, and the parameters of the excitation input and the mechanical model are obtained by the fine-blanking finite element simulation and the experiments of the vibration measurement of the press. Finally, the numerical simulation and analysis of active vibration control based on MATLAB are carried out. The results show that the control effect is good, and the vibration response is effectively reduced, thus greatly increasing the processing accuracy, saving a significant amount of energy, and reducing the energy consumption and defective rate.