An Introduction to the Diagnosis of the Delamination Process for Glass/Epoxy Composites During High-Pressure Abrasive Water-Jet Cutting

1926 Views
1029 Downloads
Export citation: ABNT
KARPIŃSKI, Andrzej .
An Introduction to the Diagnosis of the Delamination Process for Glass/Epoxy Composites During High-Pressure Abrasive Water-Jet Cutting. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 52, n.7-8, p. 532-538, august 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/an-introduction-to-the-diagnosis-of-the-delamination-process-for-glassepoxy-composites-during-high-pressure-abrasive-water-jet-cutting/>. Date accessed: 05 nov. 2024. 
doi:http://dx.doi.org/.
Karpiński, A.
(2006).
An Introduction to the Diagnosis of the Delamination Process for Glass/Epoxy Composites During High-Pressure Abrasive Water-Jet Cutting.
Strojniški vestnik - Journal of Mechanical Engineering, 52(7-8), 532-538.
doi:http://dx.doi.org/
@article{.,
	author = {Andrzej  Karpiński},
	title = {An Introduction to the Diagnosis of the Delamination Process for Glass/Epoxy Composites During High-Pressure Abrasive Water-Jet Cutting},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {52},
	number = {7-8},
	year = {2006},
	keywords = {diagnostic systems; composites materials; abrasive water jet cutting; },
	abstract = {The main problem during the abrasive water-jet cutting of fibre-reinforced composites is delamination. This delamination is a phenomenon specific to composite materials, which is independent of the machining method used. In this paper the concept of a diagnostic system is presented, based on a digital time and frequency signal analysis, for the online detection of the delamination in glass-fibre-reinforced composites. The applied measurement equipment is described and the research results are presented.},
	issn = {0039-2480},	pages = {532-538},	doi = {},
	url = {https://www.sv-jme.eu/article/an-introduction-to-the-diagnosis-of-the-delamination-process-for-glassepoxy-composites-during-high-pressure-abrasive-water-jet-cutting/}
}
Karpiński, A.
2006 August 52. An Introduction to the Diagnosis of the Delamination Process for Glass/Epoxy Composites During High-Pressure Abrasive Water-Jet Cutting. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 52:7-8
%A Karpiński, Andrzej 
%D 2006
%T An Introduction to the Diagnosis of the Delamination Process for Glass/Epoxy Composites During High-Pressure Abrasive Water-Jet Cutting
%B 2006
%9 diagnostic systems; composites materials; abrasive water jet cutting; 
%! An Introduction to the Diagnosis of the Delamination Process for Glass/Epoxy Composites During High-Pressure Abrasive Water-Jet Cutting
%K diagnostic systems; composites materials; abrasive water jet cutting; 
%X The main problem during the abrasive water-jet cutting of fibre-reinforced composites is delamination. This delamination is a phenomenon specific to composite materials, which is independent of the machining method used. In this paper the concept of a diagnostic system is presented, based on a digital time and frequency signal analysis, for the online detection of the delamination in glass-fibre-reinforced composites. The applied measurement equipment is described and the research results are presented.
%U https://www.sv-jme.eu/article/an-introduction-to-the-diagnosis-of-the-delamination-process-for-glassepoxy-composites-during-high-pressure-abrasive-water-jet-cutting/
%0 Journal Article
%R 
%& 532
%P 7
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 52
%N 7-8
%@ 0039-2480
%8 2017-08-18
%7 2017-08-18
Karpiński, Andrzej.
"An Introduction to the Diagnosis of the Delamination Process for Glass/Epoxy Composites During High-Pressure Abrasive Water-Jet Cutting." Strojniški vestnik - Journal of Mechanical Engineering [Online], 52.7-8 (2006): 532-538. Web.  05 Nov. 2024
TY  - JOUR
AU  - Karpiński, Andrzej 
PY  - 2006
TI  - An Introduction to the Diagnosis of the Delamination Process for Glass/Epoxy Composites During High-Pressure Abrasive Water-Jet Cutting
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - diagnostic systems; composites materials; abrasive water jet cutting; 
N2  - The main problem during the abrasive water-jet cutting of fibre-reinforced composites is delamination. This delamination is a phenomenon specific to composite materials, which is independent of the machining method used. In this paper the concept of a diagnostic system is presented, based on a digital time and frequency signal analysis, for the online detection of the delamination in glass-fibre-reinforced composites. The applied measurement equipment is described and the research results are presented.
UR  - https://www.sv-jme.eu/article/an-introduction-to-the-diagnosis-of-the-delamination-process-for-glassepoxy-composites-during-high-pressure-abrasive-water-jet-cutting/
@article{{}{.},
	author = {Karpiński, A.},
	title = {An Introduction to the Diagnosis of the Delamination Process for Glass/Epoxy Composites During High-Pressure Abrasive Water-Jet Cutting},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {52},
	number = {7-8},
	year = {2006},
	doi = {},
	url = {https://www.sv-jme.eu/article/an-introduction-to-the-diagnosis-of-the-delamination-process-for-glassepoxy-composites-during-high-pressure-abrasive-water-jet-cutting/}
}
TY  - JOUR
AU  - Karpiński, Andrzej 
PY  - 2017/08/18
TI  - An Introduction to the Diagnosis of the Delamination Process for Glass/Epoxy Composites During High-Pressure Abrasive Water-Jet Cutting
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 52, No 7-8 (2006): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - diagnostic systems, composites materials, abrasive water jet cutting, 
N2  - The main problem during the abrasive water-jet cutting of fibre-reinforced composites is delamination. This delamination is a phenomenon specific to composite materials, which is independent of the machining method used. In this paper the concept of a diagnostic system is presented, based on a digital time and frequency signal analysis, for the online detection of the delamination in glass-fibre-reinforced composites. The applied measurement equipment is described and the research results are presented.
UR  - https://www.sv-jme.eu/article/an-introduction-to-the-diagnosis-of-the-delamination-process-for-glassepoxy-composites-during-high-pressure-abrasive-water-jet-cutting/
Karpiński, Andrzej"An Introduction to the Diagnosis of the Delamination Process for Glass/Epoxy Composites During High-Pressure Abrasive Water-Jet Cutting" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 52 Number 7-8 (18 August 2017)

Authors

Affiliations

  • Institute of Advanced Manufacturing Technology, Poland

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 52(2006)7-8, 532-538
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

The main problem during the abrasive water-jet cutting of fibre-reinforced composites is delamination. This delamination is a phenomenon specific to composite materials, which is independent of the machining method used. In this paper the concept of a diagnostic system is presented, based on a digital time and frequency signal analysis, for the online detection of the delamination in glass-fibre-reinforced composites. The applied measurement equipment is described and the research results are presented.

diagnostic systems; composites materials; abrasive water jet cutting;