An Investigation of Slipping in Rolamite-Type Mechanisms

ULOZAS, Ričardas Viktoras.
An Investigation of Slipping in Rolamite-Type Mechanisms. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 50, n.6, p. 302-309, july 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/an-investigation-of-slipping-in-rolamite-type-mechanisms/>. Date accessed: 25 apr. 2024. 
doi:http://dx.doi.org/.

Ulozas, R.
(2004).
An Investigation of Slipping in Rolamite-Type Mechanisms.
Strojniški vestnik - Journal of Mechanical Engineering, 50(6), 302-309.
doi:http://dx.doi.org/

@article{.,
	author = {Ričardas Viktoras Ulozas},
	title = {An Investigation of Slipping in Rolamite-Type Mechanisms},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {50},
	number = {6},
	year = {2004},
	keywords = {Rolamite type mechanisms; geometrical slipping; springy slipping; compensators; },
	abstract = {This paper looks at two variants of slipping that exist in precision roller-band mechanisms (PRBM), such as a Rolamite-type mechanism (geometric and springy slipping). The rollers are wrapped by a flexible band in the mechanisms and contacted between themselves only through a flexible band, the ends of which are attached to the directing planes of the rolamite type mechanism (RTM). In the PRBM there is geometric sliding, the value of which is influenced by the thickness of the flexible band. Compensation of the geometric sliding can be achieved by introducing additional band-wrapping rollers, the direction of which is opposite to the main band’s direction. The influence of the flexible band’s free ends on the accuracy of the positioning of the mechanism is reviewed. The calculation scheme of the mechanism for the measurement and calculation of springy slipping of RTM units is presented and described by equations. It is established that the springy slipping in the RTM is connected to the strain of the free band’s pieces from the resistance forces of motion. The value of springy slipping directly depends on the resistance force, the amplitude of motion and the value of the coordinate of the swinging centre. The scheme of a compensator of the springy slipping is presented. The calculation relations permitting us to define the parameters of spring-compensator, eliminating springy slipping, are deduced.},
	issn = {0039-2480},	pages = {302-309},	doi = {},
	url = {https://www.sv-jme.eu/article/an-investigation-of-slipping-in-rolamite-type-mechanisms/}
}

Ulozas, R.
2004 July 50. An Investigation of Slipping in Rolamite-Type Mechanisms. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 50:6

%A Ulozas, Ričardas Viktoras
%D 2004
%T An Investigation of Slipping in Rolamite-Type Mechanisms
%B 2004
%9 Rolamite type mechanisms; geometrical slipping; springy slipping; compensators; 
%! An Investigation of Slipping in Rolamite-Type Mechanisms
%K Rolamite type mechanisms; geometrical slipping; springy slipping; compensators; 
%X This paper looks at two variants of slipping that exist in precision roller-band mechanisms (PRBM), such as a Rolamite-type mechanism (geometric and springy slipping). The rollers are wrapped by a flexible band in the mechanisms and contacted between themselves only through a flexible band, the ends of which are attached to the directing planes of the rolamite type mechanism (RTM). In the PRBM there is geometric sliding, the value of which is influenced by the thickness of the flexible band. Compensation of the geometric sliding can be achieved by introducing additional band-wrapping rollers, the direction of which is opposite to the main band’s direction. The influence of the flexible band’s free ends on the accuracy of the positioning of the mechanism is reviewed. The calculation scheme of the mechanism for the measurement and calculation of springy slipping of RTM units is presented and described by equations. It is established that the springy slipping in the RTM is connected to the strain of the free band’s pieces from the resistance forces of motion. The value of springy slipping directly depends on the resistance force, the amplitude of motion and the value of the coordinate of the swinging centre. The scheme of a compensator of the springy slipping is presented. The calculation relations permitting us to define the parameters of spring-compensator, eliminating springy slipping, are deduced.
%U https://www.sv-jme.eu/article/an-investigation-of-slipping-in-rolamite-type-mechanisms/
%0 Journal Article
%R 
%& 302
%P 8
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 50
%N 6
%@ 0039-2480
%8 2017-07-07
%7 2017-07-07

Ulozas, Ričardas.
"An Investigation of Slipping in Rolamite-Type Mechanisms." Strojniški vestnik - Journal of Mechanical Engineering [Online], 50.6 (2004): 302-309. Web.  25 Apr. 2024

TY  - JOUR
AU  - Ulozas, Ričardas Viktoras
PY  - 2004
TI  - An Investigation of Slipping in Rolamite-Type Mechanisms
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - Rolamite type mechanisms; geometrical slipping; springy slipping; compensators; 
N2  - This paper looks at two variants of slipping that exist in precision roller-band mechanisms (PRBM), such as a Rolamite-type mechanism (geometric and springy slipping). The rollers are wrapped by a flexible band in the mechanisms and contacted between themselves only through a flexible band, the ends of which are attached to the directing planes of the rolamite type mechanism (RTM). In the PRBM there is geometric sliding, the value of which is influenced by the thickness of the flexible band. Compensation of the geometric sliding can be achieved by introducing additional band-wrapping rollers, the direction of which is opposite to the main band’s direction. The influence of the flexible band’s free ends on the accuracy of the positioning of the mechanism is reviewed. The calculation scheme of the mechanism for the measurement and calculation of springy slipping of RTM units is presented and described by equations. It is established that the springy slipping in the RTM is connected to the strain of the free band’s pieces from the resistance forces of motion. The value of springy slipping directly depends on the resistance force, the amplitude of motion and the value of the coordinate of the swinging centre. The scheme of a compensator of the springy slipping is presented. The calculation relations permitting us to define the parameters of spring-compensator, eliminating springy slipping, are deduced.
UR  - https://www.sv-jme.eu/article/an-investigation-of-slipping-in-rolamite-type-mechanisms/

@article{{}{.},
	author = {Ulozas, R.},
	title = {An Investigation of Slipping in Rolamite-Type Mechanisms},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {50},
	number = {6},
	year = {2004},
	doi = {},
	url = {https://www.sv-jme.eu/article/an-investigation-of-slipping-in-rolamite-type-mechanisms/}
}

TY  - JOUR
AU  - Ulozas, Ričardas Viktoras
PY  - 2017/07/07
TI  - An Investigation of Slipping in Rolamite-Type Mechanisms
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 50, No 6 (2004): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - Rolamite type mechanisms, geometrical slipping, springy slipping, compensators, 
N2  - This paper looks at two variants of slipping that exist in precision roller-band mechanisms (PRBM), such as a Rolamite-type mechanism (geometric and springy slipping). The rollers are wrapped by a flexible band in the mechanisms and contacted between themselves only through a flexible band, the ends of which are attached to the directing planes of the rolamite type mechanism (RTM). In the PRBM there is geometric sliding, the value of which is influenced by the thickness of the flexible band. Compensation of the geometric sliding can be achieved by introducing additional band-wrapping rollers, the direction of which is opposite to the main band’s direction. The influence of the flexible band’s free ends on the accuracy of the positioning of the mechanism is reviewed. The calculation scheme of the mechanism for the measurement and calculation of springy slipping of RTM units is presented and described by equations. It is established that the springy slipping in the RTM is connected to the strain of the free band’s pieces from the resistance forces of motion. The value of springy slipping directly depends on the resistance force, the amplitude of motion and the value of the coordinate of the swinging centre. The scheme of a compensator of the springy slipping is presented. The calculation relations permitting us to define the parameters of spring-compensator, eliminating springy slipping, are deduced.
UR  - https://www.sv-jme.eu/article/an-investigation-of-slipping-in-rolamite-type-mechanisms/

Ulozas, Ričardas"An Investigation of Slipping in Rolamite-Type Mechanisms" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 50 Number 6 (07 July 2017)