Analysis of Geometrical Accuracy in Ironing

KAMPUŠ, Zlatko ;KUZMAN, Karl .
Analysis of Geometrical Accuracy in Ironing. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 40, n.9-10, p. 323-332, july 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/analysis-of-geometrical-accuracy-in-ironing/>. Date accessed: 25 apr. 2024. 
doi:http://dx.doi.org/.

Kampuš, Z., & Kuzman, K.
(1994).
Analysis of Geometrical Accuracy in Ironing.
Strojniški vestnik - Journal of Mechanical Engineering, 40(9-10), 323-332.
doi:http://dx.doi.org/

@article{.,
	author = {Zlatko  Kampuš and Karl  Kuzman},
	title = {Analysis of Geometrical Accuracy in Ironing},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {40},
	number = {9-10},
	year = {1994},
	keywords = {Ironing; Geometrical Accuracy; },
	abstract = {Accuracy analysis of ironing cups, which had been previously made by deep drawing without a blankholder, is shown in the paper. Two theoretical models were built, enabling the study of most of the influences on geometrical accuracy. The first was based on the elementary theory of elasto-plasticity. Equations for the calculation of inner and outer diameters of the workpiece are given. An FEM program is used for the other model. The models were verified experimentally. The findings and a critical analysis of both models are given in the conclusion.},
	issn = {0039-2480},	pages = {323-332},	doi = {},
	url = {https://www.sv-jme.eu/article/analysis-of-geometrical-accuracy-in-ironing/}
}

Kampuš, Z.,Kuzman, K.
1994 July 40. Analysis of Geometrical Accuracy in Ironing. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 40:9-10

%A Kampuš, Zlatko 
%A Kuzman, Karl 
%D 1994
%T Analysis of Geometrical Accuracy in Ironing
%B 1994
%9 Ironing; Geometrical Accuracy; 
%! Analysis of Geometrical Accuracy in Ironing
%K Ironing; Geometrical Accuracy; 
%X Accuracy analysis of ironing cups, which had been previously made by deep drawing without a blankholder, is shown in the paper. Two theoretical models were built, enabling the study of most of the influences on geometrical accuracy. The first was based on the elementary theory of elasto-plasticity. Equations for the calculation of inner and outer diameters of the workpiece are given. An FEM program is used for the other model. The models were verified experimentally. The findings and a critical analysis of both models are given in the conclusion.
%U https://www.sv-jme.eu/article/analysis-of-geometrical-accuracy-in-ironing/
%0 Journal Article
%R 
%& 323
%P 10
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 40
%N 9-10
%@ 0039-2480
%8 2017-07-05
%7 2017-07-05

Kampuš, Zlatko, & Karl  Kuzman.
"Analysis of Geometrical Accuracy in Ironing." Strojniški vestnik - Journal of Mechanical Engineering [Online], 40.9-10 (1994): 323-332. Web.  25 Apr. 2024

TY  - JOUR
AU  - Kampuš, Zlatko 
AU  - Kuzman, Karl 
PY  - 1994
TI  - Analysis of Geometrical Accuracy in Ironing
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - Ironing; Geometrical Accuracy; 
N2  - Accuracy analysis of ironing cups, which had been previously made by deep drawing without a blankholder, is shown in the paper. Two theoretical models were built, enabling the study of most of the influences on geometrical accuracy. The first was based on the elementary theory of elasto-plasticity. Equations for the calculation of inner and outer diameters of the workpiece are given. An FEM program is used for the other model. The models were verified experimentally. The findings and a critical analysis of both models are given in the conclusion.
UR  - https://www.sv-jme.eu/article/analysis-of-geometrical-accuracy-in-ironing/

@article{{}{.},
	author = {Kampuš, Z., Kuzman, K.},
	title = {Analysis of Geometrical Accuracy in Ironing},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {40},
	number = {9-10},
	year = {1994},
	doi = {},
	url = {https://www.sv-jme.eu/article/analysis-of-geometrical-accuracy-in-ironing/}
}

TY  - JOUR
AU  - Kampuš, Zlatko 
AU  - Kuzman, Karl 
PY  - 2017/07/05
TI  - Analysis of Geometrical Accuracy in Ironing
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 40, No 9-10 (1994): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - Ironing, Geometrical Accuracy, 
N2  - Accuracy analysis of ironing cups, which had been previously made by deep drawing without a blankholder, is shown in the paper. Two theoretical models were built, enabling the study of most of the influences on geometrical accuracy. The first was based on the elementary theory of elasto-plasticity. Equations for the calculation of inner and outer diameters of the workpiece are given. An FEM program is used for the other model. The models were verified experimentally. The findings and a critical analysis of both models are given in the conclusion.
UR  - https://www.sv-jme.eu/article/analysis-of-geometrical-accuracy-in-ironing/

Kampuš, Zlatko, AND Kuzman, Karl.
"Analysis of Geometrical Accuracy in Ironing" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 40 Number 9-10 (05 July 2017)