Analysis of Laser Cutting of Cold-Rolled Plate for Demanding Deep Draw

718 Views
315 Downloads
Export citation: ABNT
GRUM, Janez ;ZULJAN, Darjo .
Analysis of Laser Cutting of Cold-Rolled Plate for Demanding Deep Draw. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 45, n.11, p. 451-462, november 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/analysis-of-laser-cutting-of-cold-rolled-plate-for-demanding-deep-draw/>. Date accessed: 06 jun. 2020. 
doi:http://dx.doi.org/.
Grum, J., & Zuljan, D.
(1999).
Analysis of Laser Cutting of Cold-Rolled Plate for Demanding Deep Draw.
Strojniški vestnik - Journal of Mechanical Engineering, 45(11), 451-462.
doi:http://dx.doi.org/
@article{.,
	author = {Janez  Grum and Darjo  Zuljan},
	title = {Analysis of Laser Cutting of Cold-Rolled Plate for Demanding Deep Draw},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {45},
	number = {11},
	year = {1999},
	keywords = {laser cutting; surface roughness; macroanalysis; microhardness; },
	abstract = {Studies conducted on the condition of a surface macrostructure and microstructure and the subsurface of a cut, confirm that by measuring various roughness parameters the laser cutting process can be optimized very successfully. Different energy inputs and various modes of laser beam operation allowed us to ascertain that the major influences on cut quality were exerted by beam power and cutting speed, which determine the amount of energy transferred to the cutting front. The results of our studies conducted so far, and the experience gained in assessment of the laser cut quality, confirm that knowledge of the lower and the upper cutting speeds is necessary to determination the optimum parameters for laser cutting. A result of poor circular polarization is that the cut quality depends on the cutting direction.},
	issn = {0039-2480},	pages = {451-462},	doi = {},
	url = {https://www.sv-jme.eu/article/analysis-of-laser-cutting-of-cold-rolled-plate-for-demanding-deep-draw/}
}
Grum, J.,Zuljan, D.
1999 November 45. Analysis of Laser Cutting of Cold-Rolled Plate for Demanding Deep Draw. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 45:11
%A Grum, Janez 
%A Zuljan, Darjo 
%D 1999
%T Analysis of Laser Cutting of Cold-Rolled Plate for Demanding Deep Draw
%B 1999
%9 laser cutting; surface roughness; macroanalysis; microhardness; 
%! Analysis of Laser Cutting of Cold-Rolled Plate for Demanding Deep Draw
%K laser cutting; surface roughness; macroanalysis; microhardness; 
%X Studies conducted on the condition of a surface macrostructure and microstructure and the subsurface of a cut, confirm that by measuring various roughness parameters the laser cutting process can be optimized very successfully. Different energy inputs and various modes of laser beam operation allowed us to ascertain that the major influences on cut quality were exerted by beam power and cutting speed, which determine the amount of energy transferred to the cutting front. The results of our studies conducted so far, and the experience gained in assessment of the laser cut quality, confirm that knowledge of the lower and the upper cutting speeds is necessary to determination the optimum parameters for laser cutting. A result of poor circular polarization is that the cut quality depends on the cutting direction.
%U https://www.sv-jme.eu/article/analysis-of-laser-cutting-of-cold-rolled-plate-for-demanding-deep-draw/
%0 Journal Article
%R 
%& 451
%P 12
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 45
%N 11
%@ 0039-2480
%8 2017-11-11
%7 2017-11-11
Grum, Janez, & Darjo  Zuljan.
"Analysis of Laser Cutting of Cold-Rolled Plate for Demanding Deep Draw." Strojniški vestnik - Journal of Mechanical Engineering [Online], 45.11 (1999): 451-462. Web.  06 Jun. 2020
TY  - JOUR
AU  - Grum, Janez 
AU  - Zuljan, Darjo 
PY  - 1999
TI  - Analysis of Laser Cutting of Cold-Rolled Plate for Demanding Deep Draw
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - laser cutting; surface roughness; macroanalysis; microhardness; 
N2  - Studies conducted on the condition of a surface macrostructure and microstructure and the subsurface of a cut, confirm that by measuring various roughness parameters the laser cutting process can be optimized very successfully. Different energy inputs and various modes of laser beam operation allowed us to ascertain that the major influences on cut quality were exerted by beam power and cutting speed, which determine the amount of energy transferred to the cutting front. The results of our studies conducted so far, and the experience gained in assessment of the laser cut quality, confirm that knowledge of the lower and the upper cutting speeds is necessary to determination the optimum parameters for laser cutting. A result of poor circular polarization is that the cut quality depends on the cutting direction.
UR  - https://www.sv-jme.eu/article/analysis-of-laser-cutting-of-cold-rolled-plate-for-demanding-deep-draw/
@article{{}{.},
	author = {Grum, J., Zuljan, D.},
	title = {Analysis of Laser Cutting of Cold-Rolled Plate for Demanding Deep Draw},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {45},
	number = {11},
	year = {1999},
	doi = {},
	url = {https://www.sv-jme.eu/article/analysis-of-laser-cutting-of-cold-rolled-plate-for-demanding-deep-draw/}
}
TY  - JOUR
AU  - Grum, Janez 
AU  - Zuljan, Darjo 
PY  - 2017/11/11
TI  - Analysis of Laser Cutting of Cold-Rolled Plate for Demanding Deep Draw
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 45, No 11 (1999): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - laser cutting, surface roughness, macroanalysis, microhardness, 
N2  - Studies conducted on the condition of a surface macrostructure and microstructure and the subsurface of a cut, confirm that by measuring various roughness parameters the laser cutting process can be optimized very successfully. Different energy inputs and various modes of laser beam operation allowed us to ascertain that the major influences on cut quality were exerted by beam power and cutting speed, which determine the amount of energy transferred to the cutting front. The results of our studies conducted so far, and the experience gained in assessment of the laser cut quality, confirm that knowledge of the lower and the upper cutting speeds is necessary to determination the optimum parameters for laser cutting. A result of poor circular polarization is that the cut quality depends on the cutting direction.
UR  - https://www.sv-jme.eu/article/analysis-of-laser-cutting-of-cold-rolled-plate-for-demanding-deep-draw/
Grum, Janez, AND Zuljan, Darjo.
"Analysis of Laser Cutting of Cold-Rolled Plate for Demanding Deep Draw" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 45 Number 11 (11 November 2017)

Authors

Affiliations

  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia
  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 45(1999)11, 451-462

Studies conducted on the condition of a surface macrostructure and microstructure and the subsurface of a cut, confirm that by measuring various roughness parameters the laser cutting process can be optimized very successfully. Different energy inputs and various modes of laser beam operation allowed us to ascertain that the major influences on cut quality were exerted by beam power and cutting speed, which determine the amount of energy transferred to the cutting front. The results of our studies conducted so far, and the experience gained in assessment of the laser cut quality, confirm that knowledge of the lower and the upper cutting speeds is necessary to determination the optimum parameters for laser cutting. A result of poor circular polarization is that the cut quality depends on the cutting direction.

laser cutting; surface roughness; macroanalysis; microhardness;