Analysis of Periodic Circular Wood Tissue Cutting Process Stability

1277 Views
988 Downloads
Export citation: ABNT
BUČAR, Bojan .
Analysis of Periodic Circular Wood Tissue Cutting Process Stability. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 42, n.11-12, p. 343-350, november 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/analysis-of-periodic-circular-wood-tissue-cutting-process-stability/>. Date accessed: 28 jun. 2022. 
doi:http://dx.doi.org/.
Bučar, B.
(1996).
Analysis of Periodic Circular Wood Tissue Cutting Process Stability.
Strojniški vestnik - Journal of Mechanical Engineering, 42(11-12), 343-350.
doi:http://dx.doi.org/
@article{.,
	author = {Bojan  Bučar},
	title = {Analysis of Periodic Circular Wood Tissue Cutting Process Stability},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {42},
	number = {11-12},
	year = {1996},
	keywords = {Cutting Process Stability; Circular Wood Tissue; },
	abstract = {Shown is a dynamic model of periodic circular cutting of oriented wood tissue in which both the properties of the material and the dynamic properties of the machining system have been considered. The cutting or exciting force is the result of internal and external modulation. The internal modulation is the result of the effect of the properties of the machined material which are given by specific cutting pressure, while the external modulation is the consequence of the varying material flux which affected by relative displacements between the workpiece and the tool. Relative displacements, which are the consequence of the manner of excitation and dynamic properties of the machining system, are also the cause of self-excitation occurrence. As in the process of cutting, the cutting or self-exciting force depends on relative displacements between the tool and the workpiece, the dynamic model developed is non-linear. By simulation of a dynamic model it is possible to analyse the process of cutting wood tissue in its entirety, and it can thus be employed to optimize the selection of tools and the processing parameters of machining.},
	issn = {0039-2480},	pages = {343-350},	doi = {},
	url = {https://www.sv-jme.eu/article/analysis-of-periodic-circular-wood-tissue-cutting-process-stability/}
}
Bučar, B.
1996 November 42. Analysis of Periodic Circular Wood Tissue Cutting Process Stability. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 42:11-12
%A Bučar, Bojan 
%D 1996
%T Analysis of Periodic Circular Wood Tissue Cutting Process Stability
%B 1996
%9 Cutting Process Stability; Circular Wood Tissue; 
%! Analysis of Periodic Circular Wood Tissue Cutting Process Stability
%K Cutting Process Stability; Circular Wood Tissue; 
%X Shown is a dynamic model of periodic circular cutting of oriented wood tissue in which both the properties of the material and the dynamic properties of the machining system have been considered. The cutting or exciting force is the result of internal and external modulation. The internal modulation is the result of the effect of the properties of the machined material which are given by specific cutting pressure, while the external modulation is the consequence of the varying material flux which affected by relative displacements between the workpiece and the tool. Relative displacements, which are the consequence of the manner of excitation and dynamic properties of the machining system, are also the cause of self-excitation occurrence. As in the process of cutting, the cutting or self-exciting force depends on relative displacements between the tool and the workpiece, the dynamic model developed is non-linear. By simulation of a dynamic model it is possible to analyse the process of cutting wood tissue in its entirety, and it can thus be employed to optimize the selection of tools and the processing parameters of machining.
%U https://www.sv-jme.eu/article/analysis-of-periodic-circular-wood-tissue-cutting-process-stability/
%0 Journal Article
%R 
%& 343
%P 8
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 42
%N 11-12
%@ 0039-2480
%8 2017-11-11
%7 2017-11-11
Bučar, Bojan.
"Analysis of Periodic Circular Wood Tissue Cutting Process Stability." Strojniški vestnik - Journal of Mechanical Engineering [Online], 42.11-12 (1996): 343-350. Web.  28 Jun. 2022
TY  - JOUR
AU  - Bučar, Bojan 
PY  - 1996
TI  - Analysis of Periodic Circular Wood Tissue Cutting Process Stability
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - Cutting Process Stability; Circular Wood Tissue; 
N2  - Shown is a dynamic model of periodic circular cutting of oriented wood tissue in which both the properties of the material and the dynamic properties of the machining system have been considered. The cutting or exciting force is the result of internal and external modulation. The internal modulation is the result of the effect of the properties of the machined material which are given by specific cutting pressure, while the external modulation is the consequence of the varying material flux which affected by relative displacements between the workpiece and the tool. Relative displacements, which are the consequence of the manner of excitation and dynamic properties of the machining system, are also the cause of self-excitation occurrence. As in the process of cutting, the cutting or self-exciting force depends on relative displacements between the tool and the workpiece, the dynamic model developed is non-linear. By simulation of a dynamic model it is possible to analyse the process of cutting wood tissue in its entirety, and it can thus be employed to optimize the selection of tools and the processing parameters of machining.
UR  - https://www.sv-jme.eu/article/analysis-of-periodic-circular-wood-tissue-cutting-process-stability/
@article{{}{.},
	author = {Bučar, B.},
	title = {Analysis of Periodic Circular Wood Tissue Cutting Process Stability},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {42},
	number = {11-12},
	year = {1996},
	doi = {},
	url = {https://www.sv-jme.eu/article/analysis-of-periodic-circular-wood-tissue-cutting-process-stability/}
}
TY  - JOUR
AU  - Bučar, Bojan 
PY  - 2017/11/11
TI  - Analysis of Periodic Circular Wood Tissue Cutting Process Stability
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 42, No 11-12 (1996): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - Cutting Process Stability, Circular Wood Tissue, 
N2  - Shown is a dynamic model of periodic circular cutting of oriented wood tissue in which both the properties of the material and the dynamic properties of the machining system have been considered. The cutting or exciting force is the result of internal and external modulation. The internal modulation is the result of the effect of the properties of the machined material which are given by specific cutting pressure, while the external modulation is the consequence of the varying material flux which affected by relative displacements between the workpiece and the tool. Relative displacements, which are the consequence of the manner of excitation and dynamic properties of the machining system, are also the cause of self-excitation occurrence. As in the process of cutting, the cutting or self-exciting force depends on relative displacements between the tool and the workpiece, the dynamic model developed is non-linear. By simulation of a dynamic model it is possible to analyse the process of cutting wood tissue in its entirety, and it can thus be employed to optimize the selection of tools and the processing parameters of machining.
UR  - https://www.sv-jme.eu/article/analysis-of-periodic-circular-wood-tissue-cutting-process-stability/
Bučar, Bojan"Analysis of Periodic Circular Wood Tissue Cutting Process Stability" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 42 Number 11-12 (11 November 2017)

Authors

Affiliations

  • University of Ljubljana, Biotechnical Faculty, Slovenia

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 42(1996)11-12, 343-350
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

Shown is a dynamic model of periodic circular cutting of oriented wood tissue in which both the properties of the material and the dynamic properties of the machining system have been considered. The cutting or exciting force is the result of internal and external modulation. The internal modulation is the result of the effect of the properties of the machined material which are given by specific cutting pressure, while the external modulation is the consequence of the varying material flux which affected by relative displacements between the workpiece and the tool. Relative displacements, which are the consequence of the manner of excitation and dynamic properties of the machining system, are also the cause of self-excitation occurrence. As in the process of cutting, the cutting or self-exciting force depends on relative displacements between the tool and the workpiece, the dynamic model developed is non-linear. By simulation of a dynamic model it is possible to analyse the process of cutting wood tissue in its entirety, and it can thus be employed to optimize the selection of tools and the processing parameters of machining.

Cutting Process Stability; Circular Wood Tissue;