Aspects of Using Tool Axis Inclination Angle

679 Views
255 Downloads
Export citation: ABNT
SADÍLEK, Marek ;ČEP, Robert ;BUDAK, Igor ;SOKOVIĆ, Mirko .
Aspects of Using Tool Axis Inclination Angle. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 57, n.9, p. 681-688, june 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/aspects-of-using-tool-axis-inclination-angle/>. Date accessed: 13 nov. 2019. 
doi:http://dx.doi.org/10.5545/sv-jme.2010.205.
Sadílek, M., Čep, R., Budak, I., & Soković, M.
(2011).
Aspects of Using Tool Axis Inclination Angle.
Strojniški vestnik - Journal of Mechanical Engineering, 57(9), 681-688.
doi:http://dx.doi.org/10.5545/sv-jme.2010.205
@article{sv-jmesv-jme.2010.205,
	author = {Marek  Sadílek and Robert  Čep and Igor  Budak and Mirko  Soković},
	title = {Aspects of Using Tool Axis Inclination Angle},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {57},
	number = {9},
	year = {2011},
	keywords = {tool axis inclination angle; ball-end milling; surface roughness; cutting forces},
	abstract = {This contribution deals with the research and proposal to change a position of tool axis against milled surface during multi-axial milling. Our target is achieving an increase in milling efficiency (improvement of functional surface properties, increase in milling accuracy, increase in tool durability, decrease in energy load on a machine, and shortening of milling time). This research attempts to make production of shape planes more efficient. This concerns production of molds, impression dies, and other complicated parts in various engineering industries, primarily automotive and aircraft ones.},
	issn = {0039-2480},	pages = {681-688},	doi = {10.5545/sv-jme.2010.205},
	url = {https://www.sv-jme.eu/article/aspects-of-using-tool-axis-inclination-angle/}
}
Sadílek, M.,Čep, R.,Budak, I.,Soković, M.
2011 June 57. Aspects of Using Tool Axis Inclination Angle. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 57:9
%A Sadílek, Marek 
%A Čep, Robert 
%A Budak, Igor 
%A Soković, Mirko 
%D 2011
%T Aspects of Using Tool Axis Inclination Angle
%B 2011
%9 tool axis inclination angle; ball-end milling; surface roughness; cutting forces
%! Aspects of Using Tool Axis Inclination Angle
%K tool axis inclination angle; ball-end milling; surface roughness; cutting forces
%X This contribution deals with the research and proposal to change a position of tool axis against milled surface during multi-axial milling. Our target is achieving an increase in milling efficiency (improvement of functional surface properties, increase in milling accuracy, increase in tool durability, decrease in energy load on a machine, and shortening of milling time). This research attempts to make production of shape planes more efficient. This concerns production of molds, impression dies, and other complicated parts in various engineering industries, primarily automotive and aircraft ones.
%U https://www.sv-jme.eu/article/aspects-of-using-tool-axis-inclination-angle/
%0 Journal Article
%R 10.5545/sv-jme.2010.205
%& 681
%P 8
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 57
%N 9
%@ 0039-2480
%8 2018-06-29
%7 2018-06-29
Sadílek, Marek, Robert  Čep, Igor  Budak, & Mirko  Soković.
"Aspects of Using Tool Axis Inclination Angle." Strojniški vestnik - Journal of Mechanical Engineering [Online], 57.9 (2011): 681-688. Web.  13 Nov. 2019
TY  - JOUR
AU  - Sadílek, Marek 
AU  - Čep, Robert 
AU  - Budak, Igor 
AU  - Soković, Mirko 
PY  - 2011
TI  - Aspects of Using Tool Axis Inclination Angle
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2010.205
KW  - tool axis inclination angle; ball-end milling; surface roughness; cutting forces
N2  - This contribution deals with the research and proposal to change a position of tool axis against milled surface during multi-axial milling. Our target is achieving an increase in milling efficiency (improvement of functional surface properties, increase in milling accuracy, increase in tool durability, decrease in energy load on a machine, and shortening of milling time). This research attempts to make production of shape planes more efficient. This concerns production of molds, impression dies, and other complicated parts in various engineering industries, primarily automotive and aircraft ones.
UR  - https://www.sv-jme.eu/article/aspects-of-using-tool-axis-inclination-angle/
@article{{sv-jme}{sv-jme.2010.205},
	author = {Sadílek, M., Čep, R., Budak, I., Soković, M.},
	title = {Aspects of Using Tool Axis Inclination Angle},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {57},
	number = {9},
	year = {2011},
	doi = {10.5545/sv-jme.2010.205},
	url = {https://www.sv-jme.eu/article/aspects-of-using-tool-axis-inclination-angle/}
}
TY  - JOUR
AU  - Sadílek, Marek 
AU  - Čep, Robert 
AU  - Budak, Igor 
AU  - Soković, Mirko 
PY  - 2018/06/29
TI  - Aspects of Using Tool Axis Inclination Angle
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 57, No 9 (2011): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2010.205
KW  - tool axis inclination angle, ball-end milling, surface roughness, cutting forces
N2  - This contribution deals with the research and proposal to change a position of tool axis against milled surface during multi-axial milling. Our target is achieving an increase in milling efficiency (improvement of functional surface properties, increase in milling accuracy, increase in tool durability, decrease in energy load on a machine, and shortening of milling time). This research attempts to make production of shape planes more efficient. This concerns production of molds, impression dies, and other complicated parts in various engineering industries, primarily automotive and aircraft ones.
UR  - https://www.sv-jme.eu/article/aspects-of-using-tool-axis-inclination-angle/
Sadílek, Marek, Čep, Robert, Budak, Igor, AND Soković, Mirko.
"Aspects of Using Tool Axis Inclination Angle" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 57 Number 9 (29 June 2018)

Authors

Affiliations

  • VŠB - Technical University of Ostrava, tř. 17. listopadu 15, 708 33, Ostrava 1, 2
  • Faculty of Technical Science, Novi Sad 3
  • Faculty of Mechanical Engineering, Ljubljana 4

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 57(2011)9, 681-688

https://doi.org/10.5545/sv-jme.2010.205

This contribution deals with the research and proposal to change a position of tool axis against milled surface during multi-axial milling. Our target is achieving an increase in milling efficiency (improvement of functional surface properties, increase in milling accuracy, increase in tool durability, decrease in energy load on a machine, and shortening of milling time). This research attempts to make production of shape planes more efficient. This concerns production of molds, impression dies, and other complicated parts in various engineering industries, primarily automotive and aircraft ones.

tool axis inclination angle; ball-end milling; surface roughness; cutting forces