OTTO, Mark ;DOBOVŠEK, Marjan ;JUNKAR, Miha . Automatic System Against Arcs in electrical Discharge Machining- Sinking (EDM-3A). Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 41, n.11-12, p. 381-387, july 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/automatic-system-against-arcs-in-electrical-discharge-machining-sinking-edm-3a/>. Date accessed: 15 oct. 2024. doi:http://dx.doi.org/.
Otto, M., Dobovšek, M., & Junkar, M. (1995). Automatic System Against Arcs in electrical Discharge Machining- Sinking (EDM-3A). Strojniški vestnik - Journal of Mechanical Engineering, 41(11-12), 381-387. doi:http://dx.doi.org/
@article{., author = {Mark Otto and Marjan Dobovšek and Miha Junkar}, title = {Automatic System Against Arcs in electrical Discharge Machining- Sinking (EDM-3A)}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {41}, number = {11-12}, year = {1995}, keywords = {electrical Discharge Machining- Sinking; Automatic System; }, abstract = {The paper presents the results obtained by the antiarcs automatic device which was developed to be installed on electrical discharge machining sinking devices. The system is based on stopping the energy supply to a discharge which is going to develop into an arc. It is especially effective in bad working conditions. It increases metal removal rate, decreases tool wear and prevents workpiece and electrode surface damage}, issn = {0039-2480}, pages = {381-387}, doi = {}, url = {https://www.sv-jme.eu/article/automatic-system-against-arcs-in-electrical-discharge-machining-sinking-edm-3a/} }
Otto, M.,Dobovšek, M.,Junkar, M. 1995 July 41. Automatic System Against Arcs in electrical Discharge Machining- Sinking (EDM-3A). Strojniški vestnik - Journal of Mechanical Engineering. [Online] 41:11-12
%A Otto, Mark %A Dobovšek, Marjan %A Junkar, Miha %D 1995 %T Automatic System Against Arcs in electrical Discharge Machining- Sinking (EDM-3A) %B 1995 %9 electrical Discharge Machining- Sinking; Automatic System; %! Automatic System Against Arcs in electrical Discharge Machining- Sinking (EDM-3A) %K electrical Discharge Machining- Sinking; Automatic System; %X The paper presents the results obtained by the antiarcs automatic device which was developed to be installed on electrical discharge machining sinking devices. The system is based on stopping the energy supply to a discharge which is going to develop into an arc. It is especially effective in bad working conditions. It increases metal removal rate, decreases tool wear and prevents workpiece and electrode surface damage %U https://www.sv-jme.eu/article/automatic-system-against-arcs-in-electrical-discharge-machining-sinking-edm-3a/ %0 Journal Article %R %& 381 %P 7 %J Strojniški vestnik - Journal of Mechanical Engineering %V 41 %N 11-12 %@ 0039-2480 %8 2017-07-06 %7 2017-07-06
Otto, Mark, Marjan Dobovšek, & Miha Junkar. "Automatic System Against Arcs in electrical Discharge Machining- Sinking (EDM-3A)." Strojniški vestnik - Journal of Mechanical Engineering [Online], 41.11-12 (1995): 381-387. Web. 15 Oct. 2024
TY - JOUR AU - Otto, Mark AU - Dobovšek, Marjan AU - Junkar, Miha PY - 1995 TI - Automatic System Against Arcs in electrical Discharge Machining- Sinking (EDM-3A) JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - electrical Discharge Machining- Sinking; Automatic System; N2 - The paper presents the results obtained by the antiarcs automatic device which was developed to be installed on electrical discharge machining sinking devices. The system is based on stopping the energy supply to a discharge which is going to develop into an arc. It is especially effective in bad working conditions. It increases metal removal rate, decreases tool wear and prevents workpiece and electrode surface damage UR - https://www.sv-jme.eu/article/automatic-system-against-arcs-in-electrical-discharge-machining-sinking-edm-3a/
@article{{}{.}, author = {Otto, M., Dobovšek, M., Junkar, M.}, title = {Automatic System Against Arcs in electrical Discharge Machining- Sinking (EDM-3A)}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {41}, number = {11-12}, year = {1995}, doi = {}, url = {https://www.sv-jme.eu/article/automatic-system-against-arcs-in-electrical-discharge-machining-sinking-edm-3a/} }
TY - JOUR AU - Otto, Mark AU - Dobovšek, Marjan AU - Junkar, Miha PY - 2017/07/06 TI - Automatic System Against Arcs in electrical Discharge Machining- Sinking (EDM-3A) JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 41, No 11-12 (1995): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - electrical Discharge Machining- Sinking, Automatic System, N2 - The paper presents the results obtained by the antiarcs automatic device which was developed to be installed on electrical discharge machining sinking devices. The system is based on stopping the energy supply to a discharge which is going to develop into an arc. It is especially effective in bad working conditions. It increases metal removal rate, decreases tool wear and prevents workpiece and electrode surface damage UR - https://www.sv-jme.eu/article/automatic-system-against-arcs-in-electrical-discharge-machining-sinking-edm-3a/
Otto, Mark, Dobovšek, Marjan, AND Junkar, Miha. "Automatic System Against Arcs in electrical Discharge Machining- Sinking (EDM-3A)" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 41 Number 11-12 (06 July 2017)
Strojniški vestnik - Journal of Mechanical Engineering 41(1995)11-12, 381-387
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The paper presents the results obtained by the antiarcs automatic device which was developed to be installed on electrical discharge machining sinking devices. The system is based on stopping the energy supply to a discharge which is going to develop into an arc. It is especially effective in bad working conditions. It increases metal removal rate, decreases tool wear and prevents workpiece and electrode surface damage