PETEK, Aleš ;KUZMAN, Karl . Backward Hole-Flanging Technology Using an Incremental Approach. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 58, n.2, p. 73-80, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/backward-hole-flanging-technology-using-an-incremental-approach/>. Date accessed: 08 oct. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2011.194.
Petek, A., & Kuzman, K. (2012). Backward Hole-Flanging Technology Using an Incremental Approach. Strojniški vestnik - Journal of Mechanical Engineering, 58(2), 73-80. doi:http://dx.doi.org/10.5545/sv-jme.2011.194
@article{sv-jmesv-jme.2011.194, author = {Aleš Petek and Karl Kuzman}, title = {Backward Hole-Flanging Technology Using an Incremental Approach}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {58}, number = {2}, year = {2012}, keywords = {backward hole-flanging; incremental forming; sheet metal}, abstract = {The manufacturing of necks on the sheet metal parts using conventional hole-flanging process in small series production is sometimes too expensive or even impossible due to the complexity of the product. For these reasons, a modern manufacturing concept called the “backward incremental hole-flanging process” is proposed. It enables producing necks on the final products that can be very complex or even closed with minimal expense. Special attention is dedicated to researching technological particularities and limitations according to industrial requirements. Due to numerous input factors having various levels of influence, empirical modelling was selected with the aim of ensuring better prediction of results. It enables predicting the impact of each particular input parameter and their iterations on the selected output variables. Results show that forming tool diameter, and horizontal and vertical step sizes have the greatest influence on the process. Moreover, the appropriate selection of process parameters results on a higher forming limit ratio and consequently, on larger necks achieved without cracks in comparison to the conventional hole-flanging process. The reason could be found in local incremental deformation of the sheet metal and a more suitable stress state.}, issn = {0039-2480}, pages = {73-80}, doi = {10.5545/sv-jme.2011.194}, url = {https://www.sv-jme.eu/article/backward-hole-flanging-technology-using-an-incremental-approach/} }
Petek, A.,Kuzman, K. 2012 June 58. Backward Hole-Flanging Technology Using an Incremental Approach. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 58:2
%A Petek, Aleš %A Kuzman, Karl %D 2012 %T Backward Hole-Flanging Technology Using an Incremental Approach %B 2012 %9 backward hole-flanging; incremental forming; sheet metal %! Backward Hole-Flanging Technology Using an Incremental Approach %K backward hole-flanging; incremental forming; sheet metal %X The manufacturing of necks on the sheet metal parts using conventional hole-flanging process in small series production is sometimes too expensive or even impossible due to the complexity of the product. For these reasons, a modern manufacturing concept called the “backward incremental hole-flanging process” is proposed. It enables producing necks on the final products that can be very complex or even closed with minimal expense. Special attention is dedicated to researching technological particularities and limitations according to industrial requirements. Due to numerous input factors having various levels of influence, empirical modelling was selected with the aim of ensuring better prediction of results. It enables predicting the impact of each particular input parameter and their iterations on the selected output variables. Results show that forming tool diameter, and horizontal and vertical step sizes have the greatest influence on the process. Moreover, the appropriate selection of process parameters results on a higher forming limit ratio and consequently, on larger necks achieved without cracks in comparison to the conventional hole-flanging process. The reason could be found in local incremental deformation of the sheet metal and a more suitable stress state. %U https://www.sv-jme.eu/article/backward-hole-flanging-technology-using-an-incremental-approach/ %0 Journal Article %R 10.5545/sv-jme.2011.194 %& 73 %P 8 %J Strojniški vestnik - Journal of Mechanical Engineering %V 58 %N 2 %@ 0039-2480 %8 2018-06-28 %7 2018-06-28
Petek, Aleš, & Karl Kuzman. "Backward Hole-Flanging Technology Using an Incremental Approach." Strojniški vestnik - Journal of Mechanical Engineering [Online], 58.2 (2012): 73-80. Web. 08 Oct. 2024
TY - JOUR AU - Petek, Aleš AU - Kuzman, Karl PY - 2012 TI - Backward Hole-Flanging Technology Using an Incremental Approach JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2011.194 KW - backward hole-flanging; incremental forming; sheet metal N2 - The manufacturing of necks on the sheet metal parts using conventional hole-flanging process in small series production is sometimes too expensive or even impossible due to the complexity of the product. For these reasons, a modern manufacturing concept called the “backward incremental hole-flanging process” is proposed. It enables producing necks on the final products that can be very complex or even closed with minimal expense. Special attention is dedicated to researching technological particularities and limitations according to industrial requirements. Due to numerous input factors having various levels of influence, empirical modelling was selected with the aim of ensuring better prediction of results. It enables predicting the impact of each particular input parameter and their iterations on the selected output variables. Results show that forming tool diameter, and horizontal and vertical step sizes have the greatest influence on the process. Moreover, the appropriate selection of process parameters results on a higher forming limit ratio and consequently, on larger necks achieved without cracks in comparison to the conventional hole-flanging process. The reason could be found in local incremental deformation of the sheet metal and a more suitable stress state. UR - https://www.sv-jme.eu/article/backward-hole-flanging-technology-using-an-incremental-approach/
@article{{sv-jme}{sv-jme.2011.194}, author = {Petek, A., Kuzman, K.}, title = {Backward Hole-Flanging Technology Using an Incremental Approach}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {58}, number = {2}, year = {2012}, doi = {10.5545/sv-jme.2011.194}, url = {https://www.sv-jme.eu/article/backward-hole-flanging-technology-using-an-incremental-approach/} }
TY - JOUR AU - Petek, Aleš AU - Kuzman, Karl PY - 2018/06/28 TI - Backward Hole-Flanging Technology Using an Incremental Approach JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 58, No 2 (2012): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2011.194 KW - backward hole-flanging, incremental forming, sheet metal N2 - The manufacturing of necks on the sheet metal parts using conventional hole-flanging process in small series production is sometimes too expensive or even impossible due to the complexity of the product. For these reasons, a modern manufacturing concept called the “backward incremental hole-flanging process” is proposed. It enables producing necks on the final products that can be very complex or even closed with minimal expense. Special attention is dedicated to researching technological particularities and limitations according to industrial requirements. Due to numerous input factors having various levels of influence, empirical modelling was selected with the aim of ensuring better prediction of results. It enables predicting the impact of each particular input parameter and their iterations on the selected output variables. Results show that forming tool diameter, and horizontal and vertical step sizes have the greatest influence on the process. Moreover, the appropriate selection of process parameters results on a higher forming limit ratio and consequently, on larger necks achieved without cracks in comparison to the conventional hole-flanging process. The reason could be found in local incremental deformation of the sheet metal and a more suitable stress state. UR - https://www.sv-jme.eu/article/backward-hole-flanging-technology-using-an-incremental-approach/
Petek, Aleš, AND Kuzman, Karl. "Backward Hole-Flanging Technology Using an Incremental Approach" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 58 Number 2 (28 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 58(2012)2, 73-80
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The manufacturing of necks on the sheet metal parts using conventional hole-flanging process in small series production is sometimes too expensive or even impossible due to the complexity of the product. For these reasons, a modern manufacturing concept called the “backward incremental hole-flanging process” is proposed. It enables producing necks on the final products that can be very complex or even closed with minimal expense. Special attention is dedicated to researching technological particularities and limitations according to industrial requirements. Due to numerous input factors having various levels of influence, empirical modelling was selected with the aim of ensuring better prediction of results. It enables predicting the impact of each particular input parameter and their iterations on the selected output variables. Results show that forming tool diameter, and horizontal and vertical step sizes have the greatest influence on the process. Moreover, the appropriate selection of process parameters results on a higher forming limit ratio and consequently, on larger necks achieved without cracks in comparison to the conventional hole-flanging process. The reason could be found in local incremental deformation of the sheet metal and a more suitable stress state.