Chip Formation Mechanism Using Finite Element Simulation

1642 Views
961 Downloads
Export citation: ABNT
ÖPÖZ, Tahsin Tecelli;CHEN, Xun .
Chip Formation Mechanism Using Finite Element Simulation. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 62, n.11, p. 636-646, june 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/chip-formation-mechanism-using-finite-element-simulation/>. Date accessed: 05 dec. 2021. 
doi:http://dx.doi.org/10.5545/sv-jme.2016.3523.
Öpöz, T., & Chen, X.
(2016).
Chip Formation Mechanism Using Finite Element Simulation.
Strojniški vestnik - Journal of Mechanical Engineering, 62(11), 636-646.
doi:http://dx.doi.org/10.5545/sv-jme.2016.3523
@article{sv-jmesv-jme.2016.3523,
	author = {Tahsin Tecelli Öpöz and Xun  Chen},
	title = {Chip Formation Mechanism Using Finite Element Simulation},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {62},
	number = {11},
	year = {2016},
	keywords = {Chip morphology; chip formation; finite element method; simulation; fracture energy; metal cutting},
	abstract = {Prediction of chip form produced during machining process is an important work when considering workpiece surface creation and possible damage caused by chips generated during machining. The paper presents a set of new results of cutting chip formation from the latest finite element method (FEM) model development. Generally, three types of chips (continuous, serrated, and discontinuous chips) are generated during metal machining. The formation of these three types of chips is investigated in relation to various influential factors, such as rake angles and depth of cuts. Progressive damage model with a damage evolution criterion is employed into the FEM model to reduce mesh dependency. It has been demonstrated that finite element simulation is a good tool for the evaluation of chip formation in relation to operational parameters, tool settings as well as material properties.},
	issn = {0039-2480},	pages = {636-646},	doi = {10.5545/sv-jme.2016.3523},
	url = {https://www.sv-jme.eu/article/chip-formation-mechanism-using-finite-element-simulation/}
}
Öpöz, T.,Chen, X.
2016 June 62. Chip Formation Mechanism Using Finite Element Simulation. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 62:11
%A Öpöz, Tahsin Tecelli
%A Chen, Xun 
%D 2016
%T Chip Formation Mechanism Using Finite Element Simulation
%B 2016
%9 Chip morphology; chip formation; finite element method; simulation; fracture energy; metal cutting
%! Chip Formation Mechanism Using Finite Element Simulation
%K Chip morphology; chip formation; finite element method; simulation; fracture energy; metal cutting
%X Prediction of chip form produced during machining process is an important work when considering workpiece surface creation and possible damage caused by chips generated during machining. The paper presents a set of new results of cutting chip formation from the latest finite element method (FEM) model development. Generally, three types of chips (continuous, serrated, and discontinuous chips) are generated during metal machining. The formation of these three types of chips is investigated in relation to various influential factors, such as rake angles and depth of cuts. Progressive damage model with a damage evolution criterion is employed into the FEM model to reduce mesh dependency. It has been demonstrated that finite element simulation is a good tool for the evaluation of chip formation in relation to operational parameters, tool settings as well as material properties.
%U https://www.sv-jme.eu/article/chip-formation-mechanism-using-finite-element-simulation/
%0 Journal Article
%R 10.5545/sv-jme.2016.3523
%& 636
%P 11
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 62
%N 11
%@ 0039-2480
%8 2018-06-27
%7 2018-06-27
Öpöz, Tahsin, & Xun  Chen.
"Chip Formation Mechanism Using Finite Element Simulation." Strojniški vestnik - Journal of Mechanical Engineering [Online], 62.11 (2016): 636-646. Web.  05 Dec. 2021
TY  - JOUR
AU  - Öpöz, Tahsin Tecelli
AU  - Chen, Xun 
PY  - 2016
TI  - Chip Formation Mechanism Using Finite Element Simulation
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2016.3523
KW  - Chip morphology; chip formation; finite element method; simulation; fracture energy; metal cutting
N2  - Prediction of chip form produced during machining process is an important work when considering workpiece surface creation and possible damage caused by chips generated during machining. The paper presents a set of new results of cutting chip formation from the latest finite element method (FEM) model development. Generally, three types of chips (continuous, serrated, and discontinuous chips) are generated during metal machining. The formation of these three types of chips is investigated in relation to various influential factors, such as rake angles and depth of cuts. Progressive damage model with a damage evolution criterion is employed into the FEM model to reduce mesh dependency. It has been demonstrated that finite element simulation is a good tool for the evaluation of chip formation in relation to operational parameters, tool settings as well as material properties.
UR  - https://www.sv-jme.eu/article/chip-formation-mechanism-using-finite-element-simulation/
@article{{sv-jme}{sv-jme.2016.3523},
	author = {Öpöz, T., Chen, X.},
	title = {Chip Formation Mechanism Using Finite Element Simulation},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {62},
	number = {11},
	year = {2016},
	doi = {10.5545/sv-jme.2016.3523},
	url = {https://www.sv-jme.eu/article/chip-formation-mechanism-using-finite-element-simulation/}
}
TY  - JOUR
AU  - Öpöz, Tahsin Tecelli
AU  - Chen, Xun 
PY  - 2018/06/27
TI  - Chip Formation Mechanism Using Finite Element Simulation
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 62, No 11 (2016): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2016.3523
KW  - Chip morphology, chip formation, finite element method, simulation, fracture energy, metal cutting
N2  - Prediction of chip form produced during machining process is an important work when considering workpiece surface creation and possible damage caused by chips generated during machining. The paper presents a set of new results of cutting chip formation from the latest finite element method (FEM) model development. Generally, three types of chips (continuous, serrated, and discontinuous chips) are generated during metal machining. The formation of these three types of chips is investigated in relation to various influential factors, such as rake angles and depth of cuts. Progressive damage model with a damage evolution criterion is employed into the FEM model to reduce mesh dependency. It has been demonstrated that finite element simulation is a good tool for the evaluation of chip formation in relation to operational parameters, tool settings as well as material properties.
UR  - https://www.sv-jme.eu/article/chip-formation-mechanism-using-finite-element-simulation/
Öpöz, Tahsin, AND Chen, Xun.
"Chip Formation Mechanism Using Finite Element Simulation" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 62 Number 11 (27 June 2018)

Authors

Affiliations

  • Liverpool John Moores University, General Engineering Research Institute, UK 1

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 62(2016)11, 636-646

https://doi.org/10.5545/sv-jme.2016.3523

Prediction of chip form produced during machining process is an important work when considering workpiece surface creation and possible damage caused by chips generated during machining. The paper presents a set of new results of cutting chip formation from the latest finite element method (FEM) model development. Generally, three types of chips (continuous, serrated, and discontinuous chips) are generated during metal machining. The formation of these three types of chips is investigated in relation to various influential factors, such as rake angles and depth of cuts. Progressive damage model with a damage evolution criterion is employed into the FEM model to reduce mesh dependency. It has been demonstrated that finite element simulation is a good tool for the evaluation of chip formation in relation to operational parameters, tool settings as well as material properties.

Chip morphology; chip formation; finite element method; simulation; fracture energy; metal cutting