KRAVČENKIENE, Violeta ;ALEKSA, Algiment ;RAGULSKIS, Minvydas ;MASKELIUNAS, Rimas . Choice of Smoothing Parameter Using Photo-Elastic Coatings. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 52, n.4, p. 237-241, august 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/choice-of-smoothing-parameter-using-photo-elastic-coatings/>. Date accessed: 26 apr. 2024. doi:http://dx.doi.org/.
Kravčenkiene, V., Aleksa, A., Ragulskis, M., & Maskeliunas, R. (2006). Choice of Smoothing Parameter Using Photo-Elastic Coatings. Strojniški vestnik - Journal of Mechanical Engineering, 52(4), 237-241. doi:http://dx.doi.org/
@article{.,
author = {Violeta Kravčenkiene and Algiment Aleksa and Minvydas Ragulskis and Rimas Maskeliunas},
title = {Choice of Smoothing Parameter Using Photo-Elastic Coatings},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {52},
number = {4},
year = {2006},
keywords = {smoothing parameters; parameter choice; plates; bending vibrations; photo-elastic coatings; },
abstract = {A method of choosing a smoothing parameter is described and illustrated for the problem of a photoelastic analysis of the bending vibrations of a plate. The finite-element model of the system is based on an approximation of the nodal displacements, while the formation of fringes is governed by the stress field in the photo-elastic coating. Without smoothing the reconstructed patterns of the fringes exhibit a non-physical behaviour at inter-element boundaries. When the smoothing parameter is too big, an over-smoothed image is obtained, which may look acceptable but be far from the realistic photo-elastic image. The presented strategy for the selection of the optimum smoothing parameter is generalised for two-dimensional Lagrange finite elements.},
issn = {0039-2480}, pages = {237-241}, doi = {},
url = {https://www.sv-jme.eu/article/choice-of-smoothing-parameter-using-photo-elastic-coatings/}
}
Kravčenkiene, V.,Aleksa, A.,Ragulskis, M.,Maskeliunas, R. 2006 August 52. Choice of Smoothing Parameter Using Photo-Elastic Coatings. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 52:4
%A Kravčenkiene, Violeta %A Aleksa, Algiment %A Ragulskis, Minvydas %A Maskeliunas, Rimas %D 2006 %T Choice of Smoothing Parameter Using Photo-Elastic Coatings %B 2006 %9 smoothing parameters; parameter choice; plates; bending vibrations; photo-elastic coatings; %! Choice of Smoothing Parameter Using Photo-Elastic Coatings %K smoothing parameters; parameter choice; plates; bending vibrations; photo-elastic coatings; %X A method of choosing a smoothing parameter is described and illustrated for the problem of a photoelastic analysis of the bending vibrations of a plate. The finite-element model of the system is based on an approximation of the nodal displacements, while the formation of fringes is governed by the stress field in the photo-elastic coating. Without smoothing the reconstructed patterns of the fringes exhibit a non-physical behaviour at inter-element boundaries. When the smoothing parameter is too big, an over-smoothed image is obtained, which may look acceptable but be far from the realistic photo-elastic image. The presented strategy for the selection of the optimum smoothing parameter is generalised for two-dimensional Lagrange finite elements. %U https://www.sv-jme.eu/article/choice-of-smoothing-parameter-using-photo-elastic-coatings/ %0 Journal Article %R %& 237 %P 5 %J Strojniški vestnik - Journal of Mechanical Engineering %V 52 %N 4 %@ 0039-2480 %8 2017-08-18 %7 2017-08-18
Kravčenkiene, Violeta, Algiment Aleksa, Minvydas Ragulskis, & Rimas Maskeliunas. "Choice of Smoothing Parameter Using Photo-Elastic Coatings." Strojniški vestnik - Journal of Mechanical Engineering [Online], 52.4 (2006): 237-241. Web. 26 Apr. 2024
TY - JOUR AU - Kravčenkiene, Violeta AU - Aleksa, Algiment AU - Ragulskis, Minvydas AU - Maskeliunas, Rimas PY - 2006 TI - Choice of Smoothing Parameter Using Photo-Elastic Coatings JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - smoothing parameters; parameter choice; plates; bending vibrations; photo-elastic coatings; N2 - A method of choosing a smoothing parameter is described and illustrated for the problem of a photoelastic analysis of the bending vibrations of a plate. The finite-element model of the system is based on an approximation of the nodal displacements, while the formation of fringes is governed by the stress field in the photo-elastic coating. Without smoothing the reconstructed patterns of the fringes exhibit a non-physical behaviour at inter-element boundaries. When the smoothing parameter is too big, an over-smoothed image is obtained, which may look acceptable but be far from the realistic photo-elastic image. The presented strategy for the selection of the optimum smoothing parameter is generalised for two-dimensional Lagrange finite elements. UR - https://www.sv-jme.eu/article/choice-of-smoothing-parameter-using-photo-elastic-coatings/
@article{{}{.},
author = {Kravčenkiene, V., Aleksa, A., Ragulskis, M., Maskeliunas, R.},
title = {Choice of Smoothing Parameter Using Photo-Elastic Coatings},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {52},
number = {4},
year = {2006},
doi = {},
url = {https://www.sv-jme.eu/article/choice-of-smoothing-parameter-using-photo-elastic-coatings/}
}
TY - JOUR AU - Kravčenkiene, Violeta AU - Aleksa, Algiment AU - Ragulskis, Minvydas AU - Maskeliunas, Rimas PY - 2017/08/18 TI - Choice of Smoothing Parameter Using Photo-Elastic Coatings JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 52, No 4 (2006): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - smoothing parameters, parameter choice, plates, bending vibrations, photo-elastic coatings, N2 - A method of choosing a smoothing parameter is described and illustrated for the problem of a photoelastic analysis of the bending vibrations of a plate. The finite-element model of the system is based on an approximation of the nodal displacements, while the formation of fringes is governed by the stress field in the photo-elastic coating. Without smoothing the reconstructed patterns of the fringes exhibit a non-physical behaviour at inter-element boundaries. When the smoothing parameter is too big, an over-smoothed image is obtained, which may look acceptable but be far from the realistic photo-elastic image. The presented strategy for the selection of the optimum smoothing parameter is generalised for two-dimensional Lagrange finite elements. UR - https://www.sv-jme.eu/article/choice-of-smoothing-parameter-using-photo-elastic-coatings/
Kravčenkiene, Violeta, Aleksa, Algiment, Ragulskis, Minvydas, AND Maskeliunas, Rimas. "Choice of Smoothing Parameter Using Photo-Elastic Coatings" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 52 Number 4 (18 August 2017)
Strojniški vestnik - Journal of Mechanical Engineering 52(2006)4, 237-241
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
A method of choosing a smoothing parameter is described and illustrated for the problem of a photoelastic analysis of the bending vibrations of a plate. The finite-element model of the system is based on an approximation of the nodal displacements, while the formation of fringes is governed by the stress field in the photo-elastic coating. Without smoothing the reconstructed patterns of the fringes exhibit a non-physical behaviour at inter-element boundaries. When the smoothing parameter is too big, an over-smoothed image is obtained, which may look acceptable but be far from the realistic photo-elastic image. The presented strategy for the selection of the optimum smoothing parameter is generalised for two-dimensional Lagrange finite elements.