Combined Cutting-deforming Taps

2131 Views
1454 Downloads
Export citation: ABNT
ALEKSANDROVA, Irina Stefanova;GANEV, Gancho Nenkov.
Combined Cutting-deforming Taps. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 59, n.2, p. 106-111, june 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/combined-cutting-deforming-taps/>. Date accessed: 29 mar. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2012.721.
Aleksandrova, I., & Ganev, G.
(2013).
Combined Cutting-deforming Taps.
Strojniški vestnik - Journal of Mechanical Engineering, 59(2), 106-111.
doi:http://dx.doi.org/10.5545/sv-jme.2012.721
@article{sv-jmesv-jme.2012.721,
	author = {Irina Stefanova Aleksandrova and Gancho Nenkov Ganev},
	title = {Combined Cutting-deforming Taps},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {59},
	number = {2},
	year = {2013},
	keywords = {threads, methods of machining, combined cutting-deforming tap},
	abstract = {Enhancement of efficiency and quality of internal threads forming requires continuous improvement of the design of the tools used and optimization of their body geometry. A new design of cutting-tightening taps of enhanced strength and reliability forming thread surfaces by combining the methods of cutting and plastic deformation has been proposed in this paper. An experimental study of the torque has been carried out during thread forming employing the designed combined tool and the major factors which have an effect on the tool serviceability have been defined. An algorithm for designing cutting-tightening taps has been proposed. It guarantees a minimum torque in thread forming.},
	issn = {0039-2480},	pages = {106-111},	doi = {10.5545/sv-jme.2012.721},
	url = {https://www.sv-jme.eu/article/combined-cutting-deforming-taps/}
}
Aleksandrova, I.,Ganev, G.
2013 June 59. Combined Cutting-deforming Taps. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 59:2
%A Aleksandrova, Irina Stefanova
%A Ganev, Gancho Nenkov
%D 2013
%T Combined Cutting-deforming Taps
%B 2013
%9 threads, methods of machining, combined cutting-deforming tap
%! Combined Cutting-deforming Taps
%K threads, methods of machining, combined cutting-deforming tap
%X Enhancement of efficiency and quality of internal threads forming requires continuous improvement of the design of the tools used and optimization of their body geometry. A new design of cutting-tightening taps of enhanced strength and reliability forming thread surfaces by combining the methods of cutting and plastic deformation has been proposed in this paper. An experimental study of the torque has been carried out during thread forming employing the designed combined tool and the major factors which have an effect on the tool serviceability have been defined. An algorithm for designing cutting-tightening taps has been proposed. It guarantees a minimum torque in thread forming.
%U https://www.sv-jme.eu/article/combined-cutting-deforming-taps/
%0 Journal Article
%R 10.5545/sv-jme.2012.721
%& 106
%P 6
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 59
%N 2
%@ 0039-2480
%8 2018-06-28
%7 2018-06-28
Aleksandrova, Irina, & Gancho Nenkov Ganev.
"Combined Cutting-deforming Taps." Strojniški vestnik - Journal of Mechanical Engineering [Online], 59.2 (2013): 106-111. Web.  29 Mar. 2024
TY  - JOUR
AU  - Aleksandrova, Irina Stefanova
AU  - Ganev, Gancho Nenkov
PY  - 2013
TI  - Combined Cutting-deforming Taps
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2012.721
KW  - threads, methods of machining, combined cutting-deforming tap
N2  - Enhancement of efficiency and quality of internal threads forming requires continuous improvement of the design of the tools used and optimization of their body geometry. A new design of cutting-tightening taps of enhanced strength and reliability forming thread surfaces by combining the methods of cutting and plastic deformation has been proposed in this paper. An experimental study of the torque has been carried out during thread forming employing the designed combined tool and the major factors which have an effect on the tool serviceability have been defined. An algorithm for designing cutting-tightening taps has been proposed. It guarantees a minimum torque in thread forming.
UR  - https://www.sv-jme.eu/article/combined-cutting-deforming-taps/
@article{{sv-jme}{sv-jme.2012.721},
	author = {Aleksandrova, I., Ganev, G.},
	title = {Combined Cutting-deforming Taps},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {59},
	number = {2},
	year = {2013},
	doi = {10.5545/sv-jme.2012.721},
	url = {https://www.sv-jme.eu/article/combined-cutting-deforming-taps/}
}
TY  - JOUR
AU  - Aleksandrova, Irina Stefanova
AU  - Ganev, Gancho Nenkov
PY  - 2018/06/28
TI  - Combined Cutting-deforming Taps
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 59, No 2 (2013): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2012.721
KW  - threads, methods of machining, combined cutting-deforming tap
N2  - Enhancement of efficiency and quality of internal threads forming requires continuous improvement of the design of the tools used and optimization of their body geometry. A new design of cutting-tightening taps of enhanced strength and reliability forming thread surfaces by combining the methods of cutting and plastic deformation has been proposed in this paper. An experimental study of the torque has been carried out during thread forming employing the designed combined tool and the major factors which have an effect on the tool serviceability have been defined. An algorithm for designing cutting-tightening taps has been proposed. It guarantees a minimum torque in thread forming.
UR  - https://www.sv-jme.eu/article/combined-cutting-deforming-taps/
Aleksandrova, Irina, AND Ganev, Gancho.
"Combined Cutting-deforming Taps" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 59 Number 2 (28 June 2018)

Authors

Affiliations

  • Department of Mechanical Engineering Equipment and Technologies Теchnical University of Gabrovo 4 H.Dimitar St Gabrovo 5300, Republic of Bulgaria 1
  • Теchnical University of Gabrovo, Department of Mechanical Engineering Equipment and Technologies, Republic of Bulgaria 2

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 59(2013)2, 106-111
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

https://doi.org/10.5545/sv-jme.2012.721

Enhancement of efficiency and quality of internal threads forming requires continuous improvement of the design of the tools used and optimization of their body geometry. A new design of cutting-tightening taps of enhanced strength and reliability forming thread surfaces by combining the methods of cutting and plastic deformation has been proposed in this paper. An experimental study of the torque has been carried out during thread forming employing the designed combined tool and the major factors which have an effect on the tool serviceability have been defined. An algorithm for designing cutting-tightening taps has been proposed. It guarantees a minimum torque in thread forming.

threads, methods of machining, combined cutting-deforming tap