GRIGORIEV, Sergey Nikolaevich;STARKOV, Victor Konstantinovich;GORIN, Nikolay Andreevich;KRAJNIK, Peter ;KOPAC, Janez . Creep-Feed Grinding: An Overview of Kinematics, Parameters and Effects on Process Efficiency. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 60, n.4, p. 213-220, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/creep-feed-grinding-an-overview-of-kinematics-parameters-and-effects-on-process-efficiency/>. Date accessed: 07 oct. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2013.1547.
Grigoriev, S., Starkov, V., Gorin, N., Krajnik, P., & Kopac, J. (2014). Creep-Feed Grinding: An Overview of Kinematics, Parameters and Effects on Process Efficiency. Strojniški vestnik - Journal of Mechanical Engineering, 60(4), 213-220. doi:http://dx.doi.org/10.5545/sv-jme.2013.1547
@article{sv-jmesv-jme.2013.1547, author = {Sergey Nikolaevich Grigoriev and Victor Konstantinovich Starkov and Nikolay Andreevich Gorin and Peter Krajnik and Janez Kopac}, title = {Creep-Feed Grinding: An Overview of Kinematics, Parameters and Effects on Process Efficiency}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {60}, number = {4}, year = {2014}, keywords = {grinding, creep-feed, conventional, kinematics, parameters}, abstract = {Grinding kinematics is one of the main mechanisms affecting the behaviour and efficiency of the creep-feed grinding process; it is thus essential in understanding the interplay of its parameters in the material removal. This paper presents an overview of non-traditional process parameters, such as the apparent area of the removed material, the grinding force engagement angle, the ratio of normal-to-tangential grinding force, as well as the ratio between the depth of cut and the wheel diameter. The kinematic aspects of creep-feed grinding processes are illustrated in three different case studies for creep-feed grinding of turbine blades, gears and broaches, using highly porous, vitrified, alumina-oxide wheels at low speeds. Details about the experimental work, especially with regard to analysis and validation, are not included. Based on the case studies, however, some practical guidelines for improving process efficiency in terms of productivity and quality are provided.}, issn = {0039-2480}, pages = {213-220}, doi = {10.5545/sv-jme.2013.1547}, url = {https://www.sv-jme.eu/article/creep-feed-grinding-an-overview-of-kinematics-parameters-and-effects-on-process-efficiency/} }
Grigoriev, S.,Starkov, V.,Gorin, N.,Krajnik, P.,Kopac, J. 2014 June 60. Creep-Feed Grinding: An Overview of Kinematics, Parameters and Effects on Process Efficiency. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 60:4
%A Grigoriev, Sergey Nikolaevich %A Starkov, Victor Konstantinovich %A Gorin, Nikolay Andreevich %A Krajnik, Peter %A Kopac, Janez %D 2014 %T Creep-Feed Grinding: An Overview of Kinematics, Parameters and Effects on Process Efficiency %B 2014 %9 grinding, creep-feed, conventional, kinematics, parameters %! Creep-Feed Grinding: An Overview of Kinematics, Parameters and Effects on Process Efficiency %K grinding, creep-feed, conventional, kinematics, parameters %X Grinding kinematics is one of the main mechanisms affecting the behaviour and efficiency of the creep-feed grinding process; it is thus essential in understanding the interplay of its parameters in the material removal. This paper presents an overview of non-traditional process parameters, such as the apparent area of the removed material, the grinding force engagement angle, the ratio of normal-to-tangential grinding force, as well as the ratio between the depth of cut and the wheel diameter. The kinematic aspects of creep-feed grinding processes are illustrated in three different case studies for creep-feed grinding of turbine blades, gears and broaches, using highly porous, vitrified, alumina-oxide wheels at low speeds. Details about the experimental work, especially with regard to analysis and validation, are not included. Based on the case studies, however, some practical guidelines for improving process efficiency in terms of productivity and quality are provided. %U https://www.sv-jme.eu/article/creep-feed-grinding-an-overview-of-kinematics-parameters-and-effects-on-process-efficiency/ %0 Journal Article %R 10.5545/sv-jme.2013.1547 %& 213 %P 8 %J Strojniški vestnik - Journal of Mechanical Engineering %V 60 %N 4 %@ 0039-2480 %8 2018-06-28 %7 2018-06-28
Grigoriev, Sergey, Victor Konstantinovich Starkov, Nikolay Andreevich Gorin, Peter Krajnik, & Janez Kopac. "Creep-Feed Grinding: An Overview of Kinematics, Parameters and Effects on Process Efficiency." Strojniški vestnik - Journal of Mechanical Engineering [Online], 60.4 (2014): 213-220. Web. 07 Oct. 2024
TY - JOUR AU - Grigoriev, Sergey Nikolaevich AU - Starkov, Victor Konstantinovich AU - Gorin, Nikolay Andreevich AU - Krajnik, Peter AU - Kopac, Janez PY - 2014 TI - Creep-Feed Grinding: An Overview of Kinematics, Parameters and Effects on Process Efficiency JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2013.1547 KW - grinding, creep-feed, conventional, kinematics, parameters N2 - Grinding kinematics is one of the main mechanisms affecting the behaviour and efficiency of the creep-feed grinding process; it is thus essential in understanding the interplay of its parameters in the material removal. This paper presents an overview of non-traditional process parameters, such as the apparent area of the removed material, the grinding force engagement angle, the ratio of normal-to-tangential grinding force, as well as the ratio between the depth of cut and the wheel diameter. The kinematic aspects of creep-feed grinding processes are illustrated in three different case studies for creep-feed grinding of turbine blades, gears and broaches, using highly porous, vitrified, alumina-oxide wheels at low speeds. Details about the experimental work, especially with regard to analysis and validation, are not included. Based on the case studies, however, some practical guidelines for improving process efficiency in terms of productivity and quality are provided. UR - https://www.sv-jme.eu/article/creep-feed-grinding-an-overview-of-kinematics-parameters-and-effects-on-process-efficiency/
@article{{sv-jme}{sv-jme.2013.1547}, author = {Grigoriev, S., Starkov, V., Gorin, N., Krajnik, P., Kopac, J.}, title = {Creep-Feed Grinding: An Overview of Kinematics, Parameters and Effects on Process Efficiency}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {60}, number = {4}, year = {2014}, doi = {10.5545/sv-jme.2013.1547}, url = {https://www.sv-jme.eu/article/creep-feed-grinding-an-overview-of-kinematics-parameters-and-effects-on-process-efficiency/} }
TY - JOUR AU - Grigoriev, Sergey Nikolaevich AU - Starkov, Victor Konstantinovich AU - Gorin, Nikolay Andreevich AU - Krajnik, Peter AU - Kopac, Janez PY - 2018/06/28 TI - Creep-Feed Grinding: An Overview of Kinematics, Parameters and Effects on Process Efficiency JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 60, No 4 (2014): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2013.1547 KW - grinding, creep-feed, conventional, kinematics, parameters N2 - Grinding kinematics is one of the main mechanisms affecting the behaviour and efficiency of the creep-feed grinding process; it is thus essential in understanding the interplay of its parameters in the material removal. This paper presents an overview of non-traditional process parameters, such as the apparent area of the removed material, the grinding force engagement angle, the ratio of normal-to-tangential grinding force, as well as the ratio between the depth of cut and the wheel diameter. The kinematic aspects of creep-feed grinding processes are illustrated in three different case studies for creep-feed grinding of turbine blades, gears and broaches, using highly porous, vitrified, alumina-oxide wheels at low speeds. Details about the experimental work, especially with regard to analysis and validation, are not included. Based on the case studies, however, some practical guidelines for improving process efficiency in terms of productivity and quality are provided. UR - https://www.sv-jme.eu/article/creep-feed-grinding-an-overview-of-kinematics-parameters-and-effects-on-process-efficiency/
Grigoriev, Sergey, Starkov, Victor, Gorin, Nikolay, Krajnik, Peter, AND Kopac, Janez. "Creep-Feed Grinding: An Overview of Kinematics, Parameters and Effects on Process Efficiency" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 60 Number 4 (28 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 60(2014)4, 213-220
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
Grinding kinematics is one of the main mechanisms affecting the behaviour and efficiency of the creep-feed grinding process; it is thus essential in understanding the interplay of its parameters in the material removal. This paper presents an overview of non-traditional process parameters, such as the apparent area of the removed material, the grinding force engagement angle, the ratio of normal-to-tangential grinding force, as well as the ratio between the depth of cut and the wheel diameter. The kinematic aspects of creep-feed grinding processes are illustrated in three different case studies for creep-feed grinding of turbine blades, gears and broaches, using highly porous, vitrified, alumina-oxide wheels at low speeds. Details about the experimental work, especially with regard to analysis and validation, are not included. Based on the case studies, however, some practical guidelines for improving process efficiency in terms of productivity and quality are provided.