Dependence of Shape and Size of Contact Area of Load and Material Properties

1000 Views
801 Downloads
Export citation: ABNT
DROBNIČ, Katarina ;PREBIL, Ivan ;TORKAR, Matjaž .
Dependence of Shape and Size of Contact Area of Load and Material Properties. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 42, n.9-10, p. 288-298, july 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/dependence-of-shape-and-size-of-contact-area-of-load-and-material-properties/>. Date accessed: 06 mar. 2021. 
doi:http://dx.doi.org/.
Drobnič, K., Prebil, I., & Torkar, M.
(1996).
Dependence of Shape and Size of Contact Area of Load and Material Properties.
Strojniški vestnik - Journal of Mechanical Engineering, 42(9-10), 288-298.
doi:http://dx.doi.org/
@article{.,
	author = {Katarina  Drobnič and Ivan  Prebil and Matjaž  Torkar},
	title = {Dependence of Shape and Size of Contact Area of Load and Material Properties},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {42},
	number = {9-10},
	year = {1996},
	keywords = {Material Properties; },
	abstract = {The paper deals with the problem of the contact between the rolling element and the raceway, appearing in the calculations of the carrying capacity of large dimension rolling bearings. The carrying capacity is specified by the largest allowed contact force on the rolling element with the highest load. The established criteria for the determination of the maximum allowed static load of a rolling element - the criterion of permissible plastic deformation and criterion of permissible subsurface stress on the boundary of the hardened layer - vary widely. We have made the measurements of bearing rings in order to find out the actual carrying capacity of the bearings with hardened surfaces. The curves showing the contact surface size and the deformation of bodies in contact as a function of the applied force show the familiar elastic-plastic material behaviour. These curves are the basis for the determination of a permissible static load as a function of the material, thickness and hardness of the hardened layer, and geometry of the bodies in contact.},
	issn = {0039-2480},	pages = {288-298},	doi = {},
	url = {https://www.sv-jme.eu/article/dependence-of-shape-and-size-of-contact-area-of-load-and-material-properties/}
}
Drobnič, K.,Prebil, I.,Torkar, M.
1996 July 42. Dependence of Shape and Size of Contact Area of Load and Material Properties. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 42:9-10
%A Drobnič, Katarina 
%A Prebil, Ivan 
%A Torkar, Matjaž 
%D 1996
%T Dependence of Shape and Size of Contact Area of Load and Material Properties
%B 1996
%9 Material Properties; 
%! Dependence of Shape and Size of Contact Area of Load and Material Properties
%K Material Properties; 
%X The paper deals with the problem of the contact between the rolling element and the raceway, appearing in the calculations of the carrying capacity of large dimension rolling bearings. The carrying capacity is specified by the largest allowed contact force on the rolling element with the highest load. The established criteria for the determination of the maximum allowed static load of a rolling element - the criterion of permissible plastic deformation and criterion of permissible subsurface stress on the boundary of the hardened layer - vary widely. We have made the measurements of bearing rings in order to find out the actual carrying capacity of the bearings with hardened surfaces. The curves showing the contact surface size and the deformation of bodies in contact as a function of the applied force show the familiar elastic-plastic material behaviour. These curves are the basis for the determination of a permissible static load as a function of the material, thickness and hardness of the hardened layer, and geometry of the bodies in contact.
%U https://www.sv-jme.eu/article/dependence-of-shape-and-size-of-contact-area-of-load-and-material-properties/
%0 Journal Article
%R 
%& 288
%P 11
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 42
%N 9-10
%@ 0039-2480
%8 2017-07-06
%7 2017-07-06
Drobnič, Katarina, Ivan  Prebil, & Matjaž  Torkar.
"Dependence of Shape and Size of Contact Area of Load and Material Properties." Strojniški vestnik - Journal of Mechanical Engineering [Online], 42.9-10 (1996): 288-298. Web.  06 Mar. 2021
TY  - JOUR
AU  - Drobnič, Katarina 
AU  - Prebil, Ivan 
AU  - Torkar, Matjaž 
PY  - 1996
TI  - Dependence of Shape and Size of Contact Area of Load and Material Properties
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - Material Properties; 
N2  - The paper deals with the problem of the contact between the rolling element and the raceway, appearing in the calculations of the carrying capacity of large dimension rolling bearings. The carrying capacity is specified by the largest allowed contact force on the rolling element with the highest load. The established criteria for the determination of the maximum allowed static load of a rolling element - the criterion of permissible plastic deformation and criterion of permissible subsurface stress on the boundary of the hardened layer - vary widely. We have made the measurements of bearing rings in order to find out the actual carrying capacity of the bearings with hardened surfaces. The curves showing the contact surface size and the deformation of bodies in contact as a function of the applied force show the familiar elastic-plastic material behaviour. These curves are the basis for the determination of a permissible static load as a function of the material, thickness and hardness of the hardened layer, and geometry of the bodies in contact.
UR  - https://www.sv-jme.eu/article/dependence-of-shape-and-size-of-contact-area-of-load-and-material-properties/
@article{{}{.},
	author = {Drobnič, K., Prebil, I., Torkar, M.},
	title = {Dependence of Shape and Size of Contact Area of Load and Material Properties},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {42},
	number = {9-10},
	year = {1996},
	doi = {},
	url = {https://www.sv-jme.eu/article/dependence-of-shape-and-size-of-contact-area-of-load-and-material-properties/}
}
TY  - JOUR
AU  - Drobnič, Katarina 
AU  - Prebil, Ivan 
AU  - Torkar, Matjaž 
PY  - 2017/07/06
TI  - Dependence of Shape and Size of Contact Area of Load and Material Properties
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 42, No 9-10 (1996): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - Material Properties, 
N2  - The paper deals with the problem of the contact between the rolling element and the raceway, appearing in the calculations of the carrying capacity of large dimension rolling bearings. The carrying capacity is specified by the largest allowed contact force on the rolling element with the highest load. The established criteria for the determination of the maximum allowed static load of a rolling element - the criterion of permissible plastic deformation and criterion of permissible subsurface stress on the boundary of the hardened layer - vary widely. We have made the measurements of bearing rings in order to find out the actual carrying capacity of the bearings with hardened surfaces. The curves showing the contact surface size and the deformation of bodies in contact as a function of the applied force show the familiar elastic-plastic material behaviour. These curves are the basis for the determination of a permissible static load as a function of the material, thickness and hardness of the hardened layer, and geometry of the bodies in contact.
UR  - https://www.sv-jme.eu/article/dependence-of-shape-and-size-of-contact-area-of-load-and-material-properties/
Drobnič, Katarina, Prebil, Ivan, AND Torkar, Matjaž.
"Dependence of Shape and Size of Contact Area of Load and Material Properties" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 42 Number 9-10 (06 July 2017)

Authors

Affiliations

  • MGA, Nazarje, Slovenia
  • Faculty of Mechanical Enigneering, Ljubljana, Slovenia
  • Institute od Metals and Technology, Ljubljana, Slovenia

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 42(1996)9-10, 288-298

The paper deals with the problem of the contact between the rolling element and the raceway, appearing in the calculations of the carrying capacity of large dimension rolling bearings. The carrying capacity is specified by the largest allowed contact force on the rolling element with the highest load. The established criteria for the determination of the maximum allowed static load of a rolling element - the criterion of permissible plastic deformation and criterion of permissible subsurface stress on the boundary of the hardened layer - vary widely. We have made the measurements of bearing rings in order to find out the actual carrying capacity of the bearings with hardened surfaces. The curves showing the contact surface size and the deformation of bodies in contact as a function of the applied force show the familiar elastic-plastic material behaviour. These curves are the basis for the determination of a permissible static load as a function of the material, thickness and hardness of the hardened layer, and geometry of the bodies in contact.

Material Properties;