Device for the Measurement of Bowden Pulls

999 Views
383 Downloads
Export citation: ABNT
KROPEC, Anton ;NIKITENKO, Andrej ;KOCJAN-STJEPANOVIČ, Tanja .
Device for the Measurement of Bowden Pulls. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 43, n.7-8, p. 317-324, november 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/device-for-the-measurement-of-bowden-pulls/>. Date accessed: 22 sep. 2021. 
doi:http://dx.doi.org/.
Kropec, A., Nikitenko, A., & Kocjan-Stjepanovič, T.
(1997).
Device for the Measurement of Bowden Pulls.
Strojniški vestnik - Journal of Mechanical Engineering, 43(7-8), 317-324.
doi:http://dx.doi.org/
@article{.,
	author = {Anton  Kropec and Andrej  Nikitenko and Tanja  Kocjan-Stjepanovič},
	title = {Device for the Measurement of Bowden Pulls},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {43},
	number = {7-8},
	year = {1997},
	keywords = {bowden pulls; measuring devices; design of devices; measuring methods; },
	abstract = {The measuring device is developed and produced for the company TBP in Lenart. It is included in the producing process for bowden pulls. With a measuring period of 8 seconds, it is possible to ensure the 100 % control of products. Regulated servo drives assure an accuracy of 1%, while stretching the wire and pressing the bowden. It measures four lengths, with an accuracy of 0,1 mm, in their elastic and plastic deformations. All lengths are changeable and reference points are taken automatically when the etalon is inserted, and then the process of calibration begins. The whole process is done automatically. The results are displayed on the screen and also saved in the data base for further statistical processing.},
	issn = {0039-2480},	pages = {317-324},	doi = {},
	url = {https://www.sv-jme.eu/article/device-for-the-measurement-of-bowden-pulls/}
}
Kropec, A.,Nikitenko, A.,Kocjan-Stjepanovič, T.
1997 November 43. Device for the Measurement of Bowden Pulls. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 43:7-8
%A Kropec, Anton 
%A Nikitenko, Andrej 
%A Kocjan-Stjepanovič, Tanja 
%D 1997
%T Device for the Measurement of Bowden Pulls
%B 1997
%9 bowden pulls; measuring devices; design of devices; measuring methods; 
%! Device for the Measurement of Bowden Pulls
%K bowden pulls; measuring devices; design of devices; measuring methods; 
%X The measuring device is developed and produced for the company TBP in Lenart. It is included in the producing process for bowden pulls. With a measuring period of 8 seconds, it is possible to ensure the 100 % control of products. Regulated servo drives assure an accuracy of 1%, while stretching the wire and pressing the bowden. It measures four lengths, with an accuracy of 0,1 mm, in their elastic and plastic deformations. All lengths are changeable and reference points are taken automatically when the etalon is inserted, and then the process of calibration begins. The whole process is done automatically. The results are displayed on the screen and also saved in the data base for further statistical processing.
%U https://www.sv-jme.eu/article/device-for-the-measurement-of-bowden-pulls/
%0 Journal Article
%R 
%& 317
%P 8
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 43
%N 7-8
%@ 0039-2480
%8 2017-11-11
%7 2017-11-11
Kropec, Anton, Andrej  Nikitenko, & Tanja  Kocjan-Stjepanovič.
"Device for the Measurement of Bowden Pulls." Strojniški vestnik - Journal of Mechanical Engineering [Online], 43.7-8 (1997): 317-324. Web.  22 Sep. 2021
TY  - JOUR
AU  - Kropec, Anton 
AU  - Nikitenko, Andrej 
AU  - Kocjan-Stjepanovič, Tanja 
PY  - 1997
TI  - Device for the Measurement of Bowden Pulls
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - bowden pulls; measuring devices; design of devices; measuring methods; 
N2  - The measuring device is developed and produced for the company TBP in Lenart. It is included in the producing process for bowden pulls. With a measuring period of 8 seconds, it is possible to ensure the 100 % control of products. Regulated servo drives assure an accuracy of 1%, while stretching the wire and pressing the bowden. It measures four lengths, with an accuracy of 0,1 mm, in their elastic and plastic deformations. All lengths are changeable and reference points are taken automatically when the etalon is inserted, and then the process of calibration begins. The whole process is done automatically. The results are displayed on the screen and also saved in the data base for further statistical processing.
UR  - https://www.sv-jme.eu/article/device-for-the-measurement-of-bowden-pulls/
@article{{}{.},
	author = {Kropec, A., Nikitenko, A., Kocjan-Stjepanovič, T.},
	title = {Device for the Measurement of Bowden Pulls},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {43},
	number = {7-8},
	year = {1997},
	doi = {},
	url = {https://www.sv-jme.eu/article/device-for-the-measurement-of-bowden-pulls/}
}
TY  - JOUR
AU  - Kropec, Anton 
AU  - Nikitenko, Andrej 
AU  - Kocjan-Stjepanovič, Tanja 
PY  - 2017/11/11
TI  - Device for the Measurement of Bowden Pulls
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 43, No 7-8 (1997): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - bowden pulls, measuring devices, design of devices, measuring methods, 
N2  - The measuring device is developed and produced for the company TBP in Lenart. It is included in the producing process for bowden pulls. With a measuring period of 8 seconds, it is possible to ensure the 100 % control of products. Regulated servo drives assure an accuracy of 1%, while stretching the wire and pressing the bowden. It measures four lengths, with an accuracy of 0,1 mm, in their elastic and plastic deformations. All lengths are changeable and reference points are taken automatically when the etalon is inserted, and then the process of calibration begins. The whole process is done automatically. The results are displayed on the screen and also saved in the data base for further statistical processing.
UR  - https://www.sv-jme.eu/article/device-for-the-measurement-of-bowden-pulls/
Kropec, Anton, Nikitenko, Andrej, AND Kocjan-Stjepanovič, Tanja.
"Device for the Measurement of Bowden Pulls" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 43 Number 7-8 (11 November 2017)

Authors

Affiliations

  • EM.TRONIC, Slovenia
  • EM.TRONIC, Slovenia
  • EM.TRONIC, Slovenia

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 43(1997)7-8, 317-324

The measuring device is developed and produced for the company TBP in Lenart. It is included in the producing process for bowden pulls. With a measuring period of 8 seconds, it is possible to ensure the 100 % control of products. Regulated servo drives assure an accuracy of 1%, while stretching the wire and pressing the bowden. It measures four lengths, with an accuracy of 0,1 mm, in their elastic and plastic deformations. All lengths are changeable and reference points are taken automatically when the etalon is inserted, and then the process of calibration begins. The whole process is done automatically. The results are displayed on the screen and also saved in the data base for further statistical processing.

bowden pulls; measuring devices; design of devices; measuring methods;