Ductile Behaviour Characterization of Low Carbon Steel: a CDM Approach

2106 Views
1794 Downloads
Export citation: ABNT
AJIT, K. Priya ;GAUTAM, Abhinav ;SARKAR, Prabir Kumar.
Ductile Behaviour Characterization of Low Carbon Steel: a CDM Approach. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 62, n.5, p. 299-306, june 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/ductile-behaviour-characterization-of-low-carbon-steel-a-cdm-approach/>. Date accessed: 29 mar. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2015.3200.
Ajit, K., Gautam, A., & Sarkar, P.
(2016).
Ductile Behaviour Characterization of Low Carbon Steel: a CDM Approach.
Strojniški vestnik - Journal of Mechanical Engineering, 62(5), 299-306.
doi:http://dx.doi.org/10.5545/sv-jme.2015.3200
@article{sv-jmesv-jme.2015.3200,
	author = {K. Priya  Ajit and Abhinav  Gautam and Prabir Kumar Sarkar},
	title = {Ductile Behaviour Characterization of Low Carbon Steel: a CDM Approach},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {62},
	number = {5},
	year = {2016},
	keywords = {Damage; Continuum Damage Mechanics; Modulus Degradation; Low carbon Steel},
	abstract = {In this paper, the ductile behaviour of two different low carbon steels, C-Mn-440 and interstitial free high strength (IFHS), is presented using a continuum damage mechanics (CDM) approach. The damage growth law is adopted to predict the ductile response of the specified materials. Cyclic load-unload tensile tests in combination with standard uniaxial tensile tests helped to estimate the necessary parameters: damage variable, D, fracture stress, σf, threshold damage strain, ε0, and strain hardening exponent, n, required to apply the model. The strain hardening exponent estimated from the cyclic test data is used to predict the damage variable, D. Increase of damage shows deterioration of the hardening exponent magnitudes varying nonlinearly. The simulated flow curve by the damage variable, D, corresponding to the loadunload test is observed to approximate the experimental true stress-true strain curve very closely up to the onset of necking for both the materials. The experimental values of D, as obtained for C-Mn-440 and IFHS steels, vary from 0.10 to 0.44 and 0.09 to 0.45, respectively. The critical damage parameters, DC, for the considered materials are 0.44 and 0.45, representing their good ductile response.},
	issn = {0039-2480},	pages = {299-306},	doi = {10.5545/sv-jme.2015.3200},
	url = {https://www.sv-jme.eu/article/ductile-behaviour-characterization-of-low-carbon-steel-a-cdm-approach/}
}
Ajit, K.,Gautam, A.,Sarkar, P.
2016 June 62. Ductile Behaviour Characterization of Low Carbon Steel: a CDM Approach. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 62:5
%A Ajit, K. Priya 
%A Gautam, Abhinav 
%A Sarkar, Prabir Kumar
%D 2016
%T Ductile Behaviour Characterization of Low Carbon Steel: a CDM Approach
%B 2016
%9 Damage; Continuum Damage Mechanics; Modulus Degradation; Low carbon Steel
%! Ductile Behaviour Characterization of Low Carbon Steel: a CDM Approach
%K Damage; Continuum Damage Mechanics; Modulus Degradation; Low carbon Steel
%X In this paper, the ductile behaviour of two different low carbon steels, C-Mn-440 and interstitial free high strength (IFHS), is presented using a continuum damage mechanics (CDM) approach. The damage growth law is adopted to predict the ductile response of the specified materials. Cyclic load-unload tensile tests in combination with standard uniaxial tensile tests helped to estimate the necessary parameters: damage variable, D, fracture stress, σf, threshold damage strain, ε0, and strain hardening exponent, n, required to apply the model. The strain hardening exponent estimated from the cyclic test data is used to predict the damage variable, D. Increase of damage shows deterioration of the hardening exponent magnitudes varying nonlinearly. The simulated flow curve by the damage variable, D, corresponding to the loadunload test is observed to approximate the experimental true stress-true strain curve very closely up to the onset of necking for both the materials. The experimental values of D, as obtained for C-Mn-440 and IFHS steels, vary from 0.10 to 0.44 and 0.09 to 0.45, respectively. The critical damage parameters, DC, for the considered materials are 0.44 and 0.45, representing their good ductile response.
%U https://www.sv-jme.eu/article/ductile-behaviour-characterization-of-low-carbon-steel-a-cdm-approach/
%0 Journal Article
%R 10.5545/sv-jme.2015.3200
%& 299
%P 8
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 62
%N 5
%@ 0039-2480
%8 2018-06-27
%7 2018-06-27
Ajit, K. Priya, Abhinav  Gautam, & Prabir Kumar Sarkar.
"Ductile Behaviour Characterization of Low Carbon Steel: a CDM Approach." Strojniški vestnik - Journal of Mechanical Engineering [Online], 62.5 (2016): 299-306. Web.  29 Mar. 2024
TY  - JOUR
AU  - Ajit, K. Priya 
AU  - Gautam, Abhinav 
AU  - Sarkar, Prabir Kumar
PY  - 2016
TI  - Ductile Behaviour Characterization of Low Carbon Steel: a CDM Approach
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2015.3200
KW  - Damage; Continuum Damage Mechanics; Modulus Degradation; Low carbon Steel
N2  - In this paper, the ductile behaviour of two different low carbon steels, C-Mn-440 and interstitial free high strength (IFHS), is presented using a continuum damage mechanics (CDM) approach. The damage growth law is adopted to predict the ductile response of the specified materials. Cyclic load-unload tensile tests in combination with standard uniaxial tensile tests helped to estimate the necessary parameters: damage variable, D, fracture stress, σf, threshold damage strain, ε0, and strain hardening exponent, n, required to apply the model. The strain hardening exponent estimated from the cyclic test data is used to predict the damage variable, D. Increase of damage shows deterioration of the hardening exponent magnitudes varying nonlinearly. The simulated flow curve by the damage variable, D, corresponding to the loadunload test is observed to approximate the experimental true stress-true strain curve very closely up to the onset of necking for both the materials. The experimental values of D, as obtained for C-Mn-440 and IFHS steels, vary from 0.10 to 0.44 and 0.09 to 0.45, respectively. The critical damage parameters, DC, for the considered materials are 0.44 and 0.45, representing their good ductile response.
UR  - https://www.sv-jme.eu/article/ductile-behaviour-characterization-of-low-carbon-steel-a-cdm-approach/
@article{{sv-jme}{sv-jme.2015.3200},
	author = {Ajit, K., Gautam, A., Sarkar, P.},
	title = {Ductile Behaviour Characterization of Low Carbon Steel: a CDM Approach},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {62},
	number = {5},
	year = {2016},
	doi = {10.5545/sv-jme.2015.3200},
	url = {https://www.sv-jme.eu/article/ductile-behaviour-characterization-of-low-carbon-steel-a-cdm-approach/}
}
TY  - JOUR
AU  - Ajit, K. Priya 
AU  - Gautam, Abhinav 
AU  - Sarkar, Prabir Kumar
PY  - 2018/06/27
TI  - Ductile Behaviour Characterization of Low Carbon Steel: a CDM Approach
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 62, No 5 (2016): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2015.3200
KW  - Damage, Continuum Damage Mechanics, Modulus Degradation, Low carbon Steel
N2  - In this paper, the ductile behaviour of two different low carbon steels, C-Mn-440 and interstitial free high strength (IFHS), is presented using a continuum damage mechanics (CDM) approach. The damage growth law is adopted to predict the ductile response of the specified materials. Cyclic load-unload tensile tests in combination with standard uniaxial tensile tests helped to estimate the necessary parameters: damage variable, D, fracture stress, σf, threshold damage strain, ε0, and strain hardening exponent, n, required to apply the model. The strain hardening exponent estimated from the cyclic test data is used to predict the damage variable, D. Increase of damage shows deterioration of the hardening exponent magnitudes varying nonlinearly. The simulated flow curve by the damage variable, D, corresponding to the loadunload test is observed to approximate the experimental true stress-true strain curve very closely up to the onset of necking for both the materials. The experimental values of D, as obtained for C-Mn-440 and IFHS steels, vary from 0.10 to 0.44 and 0.09 to 0.45, respectively. The critical damage parameters, DC, for the considered materials are 0.44 and 0.45, representing their good ductile response.
UR  - https://www.sv-jme.eu/article/ductile-behaviour-characterization-of-low-carbon-steel-a-cdm-approach/
Ajit, K. Priya, Gautam, Abhinav, AND Sarkar, Prabir.
"Ductile Behaviour Characterization of Low Carbon Steel: a CDM Approach" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 62 Number 5 (27 June 2018)

Authors

Affiliations

  • Indian School of Mines, Department of Mining Machinery Engineering, India 1
  • Indian School of Mines, Department of Mechanical Engineering, India 2

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 62(2016)5, 299-306
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

https://doi.org/10.5545/sv-jme.2015.3200

In this paper, the ductile behaviour of two different low carbon steels, C-Mn-440 and interstitial free high strength (IFHS), is presented using a continuum damage mechanics (CDM) approach. The damage growth law is adopted to predict the ductile response of the specified materials. Cyclic load-unload tensile tests in combination with standard uniaxial tensile tests helped to estimate the necessary parameters: damage variable, D, fracture stress, σf, threshold damage strain, ε0, and strain hardening exponent, n, required to apply the model. The strain hardening exponent estimated from the cyclic test data is used to predict the damage variable, D. Increase of damage shows deterioration of the hardening exponent magnitudes varying nonlinearly. The simulated flow curve by the damage variable, D, corresponding to the loadunload test is observed to approximate the experimental true stress-true strain curve very closely up to the onset of necking for both the materials. The experimental values of D, as obtained for C-Mn-440 and IFHS steels, vary from 0.10 to 0.44 and 0.09 to 0.45, respectively. The critical damage parameters, DC, for the considered materials are 0.44 and 0.45, representing their good ductile response.

Damage; Continuum Damage Mechanics; Modulus Degradation; Low carbon Steel