Dynamic Behaviour of Air Valves in a Large-Scale Pipeline Apparatus

2348 Views
1237 Downloads
Export citation: ABNT
BERGANT, Anton ;KRUISBRINK, Arno ;ARREGUI, Francisco .
Dynamic Behaviour of Air Valves in a Large-Scale Pipeline Apparatus. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 58, n.4, p. 225-237, june 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/dynamic-behaviour-of-air-valves-in-a-large-scale-pipeline-apparatus/>. Date accessed: 19 apr. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2011.032.
Bergant, A., Kruisbrink, A., & Arregui, F.
(2012).
Dynamic Behaviour of Air Valves in a Large-Scale Pipeline Apparatus.
Strojniški vestnik - Journal of Mechanical Engineering, 58(4), 225-237.
doi:http://dx.doi.org/10.5545/sv-jme.2011.032
@article{sv-jmesv-jme.2011.032,
	author = {Anton  Bergant and Arno  Kruisbrink and Francisco  Arregui},
	title = {Dynamic Behaviour of Air Valves in a Large-Scale Pipeline Apparatus},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {58},
	number = {4},
	year = {2012},
	keywords = {air valves; large-scale test facility; dynamic flow test; air admission; air release; water hammer and column separation},
	abstract = {This paper describes an experimental programme on the dynamic behaviour of air valves performed in a large-scale pipeline apparatus. Dynamic flow tests were performed at large (full) scale, since previous quasi-steady flow tests at small scale did not lead to realistic results. Investigations in a large-scale pipeline apparatus lead to a better understanding of the physical processes associated with the dynamic performance of air valves. Float type air valves of nominal diameter of 50 and 100 mm were tested in geometrically similar 200 and 500 mm test sections, to allow for the assessment of dynamic scale effects and the development of dimensionless parameter groups and dynamic scale laws. The approach in the determination of the dynamic performance of air valves was to measure their response to flow acceleration/decelerations, which are imposed upon the valve. In this way, the air valve behaviour following events like system start-up, pump trip and pipe rupture is simulated. Key results of the dynamic flow tests, including air release tests (valve slam) and column separation tests (effect of air valve on surge suppression), are presented and discussed.},
	issn = {0039-2480},	pages = {225-237},	doi = {10.5545/sv-jme.2011.032},
	url = {https://www.sv-jme.eu/article/dynamic-behaviour-of-air-valves-in-a-large-scale-pipeline-apparatus/}
}
Bergant, A.,Kruisbrink, A.,Arregui, F.
2012 June 58. Dynamic Behaviour of Air Valves in a Large-Scale Pipeline Apparatus. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 58:4
%A Bergant, Anton 
%A Kruisbrink, Arno 
%A Arregui, Francisco 
%D 2012
%T Dynamic Behaviour of Air Valves in a Large-Scale Pipeline Apparatus
%B 2012
%9 air valves; large-scale test facility; dynamic flow test; air admission; air release; water hammer and column separation
%! Dynamic Behaviour of Air Valves in a Large-Scale Pipeline Apparatus
%K air valves; large-scale test facility; dynamic flow test; air admission; air release; water hammer and column separation
%X This paper describes an experimental programme on the dynamic behaviour of air valves performed in a large-scale pipeline apparatus. Dynamic flow tests were performed at large (full) scale, since previous quasi-steady flow tests at small scale did not lead to realistic results. Investigations in a large-scale pipeline apparatus lead to a better understanding of the physical processes associated with the dynamic performance of air valves. Float type air valves of nominal diameter of 50 and 100 mm were tested in geometrically similar 200 and 500 mm test sections, to allow for the assessment of dynamic scale effects and the development of dimensionless parameter groups and dynamic scale laws. The approach in the determination of the dynamic performance of air valves was to measure their response to flow acceleration/decelerations, which are imposed upon the valve. In this way, the air valve behaviour following events like system start-up, pump trip and pipe rupture is simulated. Key results of the dynamic flow tests, including air release tests (valve slam) and column separation tests (effect of air valve on surge suppression), are presented and discussed.
%U https://www.sv-jme.eu/article/dynamic-behaviour-of-air-valves-in-a-large-scale-pipeline-apparatus/
%0 Journal Article
%R 10.5545/sv-jme.2011.032
%& 225
%P 13
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 58
%N 4
%@ 0039-2480
%8 2018-06-28
%7 2018-06-28
Bergant, Anton, Arno  Kruisbrink, & Francisco  Arregui.
"Dynamic Behaviour of Air Valves in a Large-Scale Pipeline Apparatus." Strojniški vestnik - Journal of Mechanical Engineering [Online], 58.4 (2012): 225-237. Web.  19 Apr. 2024
TY  - JOUR
AU  - Bergant, Anton 
AU  - Kruisbrink, Arno 
AU  - Arregui, Francisco 
PY  - 2012
TI  - Dynamic Behaviour of Air Valves in a Large-Scale Pipeline Apparatus
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2011.032
KW  - air valves; large-scale test facility; dynamic flow test; air admission; air release; water hammer and column separation
N2  - This paper describes an experimental programme on the dynamic behaviour of air valves performed in a large-scale pipeline apparatus. Dynamic flow tests were performed at large (full) scale, since previous quasi-steady flow tests at small scale did not lead to realistic results. Investigations in a large-scale pipeline apparatus lead to a better understanding of the physical processes associated with the dynamic performance of air valves. Float type air valves of nominal diameter of 50 and 100 mm were tested in geometrically similar 200 and 500 mm test sections, to allow for the assessment of dynamic scale effects and the development of dimensionless parameter groups and dynamic scale laws. The approach in the determination of the dynamic performance of air valves was to measure their response to flow acceleration/decelerations, which are imposed upon the valve. In this way, the air valve behaviour following events like system start-up, pump trip and pipe rupture is simulated. Key results of the dynamic flow tests, including air release tests (valve slam) and column separation tests (effect of air valve on surge suppression), are presented and discussed.
UR  - https://www.sv-jme.eu/article/dynamic-behaviour-of-air-valves-in-a-large-scale-pipeline-apparatus/
@article{{sv-jme}{sv-jme.2011.032},
	author = {Bergant, A., Kruisbrink, A., Arregui, F.},
	title = {Dynamic Behaviour of Air Valves in a Large-Scale Pipeline Apparatus},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {58},
	number = {4},
	year = {2012},
	doi = {10.5545/sv-jme.2011.032},
	url = {https://www.sv-jme.eu/article/dynamic-behaviour-of-air-valves-in-a-large-scale-pipeline-apparatus/}
}
TY  - JOUR
AU  - Bergant, Anton 
AU  - Kruisbrink, Arno 
AU  - Arregui, Francisco 
PY  - 2018/06/28
TI  - Dynamic Behaviour of Air Valves in a Large-Scale Pipeline Apparatus
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 58, No 4 (2012): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2011.032
KW  - air valves, large-scale test facility, dynamic flow test, air admission, air release, water hammer and column separation
N2  - This paper describes an experimental programme on the dynamic behaviour of air valves performed in a large-scale pipeline apparatus. Dynamic flow tests were performed at large (full) scale, since previous quasi-steady flow tests at small scale did not lead to realistic results. Investigations in a large-scale pipeline apparatus lead to a better understanding of the physical processes associated with the dynamic performance of air valves. Float type air valves of nominal diameter of 50 and 100 mm were tested in geometrically similar 200 and 500 mm test sections, to allow for the assessment of dynamic scale effects and the development of dimensionless parameter groups and dynamic scale laws. The approach in the determination of the dynamic performance of air valves was to measure their response to flow acceleration/decelerations, which are imposed upon the valve. In this way, the air valve behaviour following events like system start-up, pump trip and pipe rupture is simulated. Key results of the dynamic flow tests, including air release tests (valve slam) and column separation tests (effect of air valve on surge suppression), are presented and discussed.
UR  - https://www.sv-jme.eu/article/dynamic-behaviour-of-air-valves-in-a-large-scale-pipeline-apparatus/
Bergant, Anton, Kruisbrink, Arno, AND Arregui, Francisco.
"Dynamic Behaviour of Air Valves in a Large-Scale Pipeline Apparatus" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 58 Number 4 (28 June 2018)

Authors

Affiliations

  • Litostroj Power d.o.o., Slovenia 1
  • University of Nottingham, United Kingdom 2
  • Universidad Politecnica de Valencia, Spain 3

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 58(2012)4, 225-237
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

https://doi.org/10.5545/sv-jme.2011.032

This paper describes an experimental programme on the dynamic behaviour of air valves performed in a large-scale pipeline apparatus. Dynamic flow tests were performed at large (full) scale, since previous quasi-steady flow tests at small scale did not lead to realistic results. Investigations in a large-scale pipeline apparatus lead to a better understanding of the physical processes associated with the dynamic performance of air valves. Float type air valves of nominal diameter of 50 and 100 mm were tested in geometrically similar 200 and 500 mm test sections, to allow for the assessment of dynamic scale effects and the development of dimensionless parameter groups and dynamic scale laws. The approach in the determination of the dynamic performance of air valves was to measure their response to flow acceleration/decelerations, which are imposed upon the valve. In this way, the air valve behaviour following events like system start-up, pump trip and pipe rupture is simulated. Key results of the dynamic flow tests, including air release tests (valve slam) and column separation tests (effect of air valve on surge suppression), are presented and discussed.

air valves; large-scale test facility; dynamic flow test; air admission; air release; water hammer and column separation