Effect of Dual-stage Ageing and RRA Treatment on the Three-body Abrasive Wear of the AW7075 Alloy

690 Views
632 Downloads
Export citation: ABNT
LACHOWICZ, Marzena ;LEŚNIEWSKI, Tadeusz ;LACHOWICZ, Maciej .
Effect of Dual-stage Ageing and RRA Treatment  on the Three-body Abrasive Wear of the AW7075 Alloy. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 68, n.7-8, p. 493-505, may 2022. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/effect-of-dual-stage-aging-and-rra-treatment-on-the-three-body-abrasive-wear-of-the-aw7075-alloy/>. Date accessed: 12 jun. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2022.142.
Lachowicz, M., Leśniewski, T., & Lachowicz, M.
(2022).
Effect of Dual-stage Ageing and RRA Treatment  on the Three-body Abrasive Wear of the AW7075 Alloy.
Strojniški vestnik - Journal of Mechanical Engineering, 68(7-8), 493-505.
doi:http://dx.doi.org/10.5545/sv-jme.2022.142
@article{sv-jmesv-jme.2022.142,
	author = {Marzena  Lachowicz and Tadeusz  Leśniewski and Maciej  Lachowicz},
	title = {Effect of Dual-stage Ageing and RRA Treatment  on the Three-body Abrasive Wear of the AW7075 Alloy},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {68},
	number = {7-8},
	year = {2022},
	keywords = {aluminum alloys; AW7075; abrasive wear; heat treatment; hardness; microstructure; },
	abstract = {The paper presents an analysis of the influence of the heat treatment state on the abrasive wear of the AW7075 aluminium alloy. To determine the hardening state, the material hardness was measured. It was found that hardness is not the only factor that influences this type of wear. For this reason, the influence of the emerging microstructure is also analysed in the considerations. After tribological tests, microscopic observations of surface features were carried out to determine the dominant mechanisms of surface damage. The results were extended by the hardness distribution carried out on the cross-section. There were no changes in hardness that could be related to either strain hardening or structural changes caused by friction.},
	issn = {0039-2480},	pages = {493-505},	doi = {10.5545/sv-jme.2022.142},
	url = {https://www.sv-jme.eu/article/effect-of-dual-stage-aging-and-rra-treatment-on-the-three-body-abrasive-wear-of-the-aw7075-alloy/}
}
Lachowicz, M.,Leśniewski, T.,Lachowicz, M.
2022 May 68. Effect of Dual-stage Ageing and RRA Treatment  on the Three-body Abrasive Wear of the AW7075 Alloy. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 68:7-8
%A Lachowicz, Marzena 
%A Leśniewski, Tadeusz 
%A Lachowicz, Maciej 
%D 2022
%T Effect of Dual-stage Ageing and RRA Treatment  on the Three-body Abrasive Wear of the AW7075 Alloy
%B 2022
%9 aluminum alloys; AW7075; abrasive wear; heat treatment; hardness; microstructure; 
%! Effect of Dual-stage Ageing and RRA Treatment  on the Three-body Abrasive Wear of the AW7075 Alloy
%K aluminum alloys; AW7075; abrasive wear; heat treatment; hardness; microstructure; 
%X The paper presents an analysis of the influence of the heat treatment state on the abrasive wear of the AW7075 aluminium alloy. To determine the hardening state, the material hardness was measured. It was found that hardness is not the only factor that influences this type of wear. For this reason, the influence of the emerging microstructure is also analysed in the considerations. After tribological tests, microscopic observations of surface features were carried out to determine the dominant mechanisms of surface damage. The results were extended by the hardness distribution carried out on the cross-section. There were no changes in hardness that could be related to either strain hardening or structural changes caused by friction.
%U https://www.sv-jme.eu/article/effect-of-dual-stage-aging-and-rra-treatment-on-the-three-body-abrasive-wear-of-the-aw7075-alloy/
%0 Journal Article
%R 10.5545/sv-jme.2022.142
%& 493
%P 13
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 68
%N 7-8
%@ 0039-2480
%8 2022-05-30
%7 2022-05-30
Lachowicz, Marzena, Tadeusz  Leśniewski, & Maciej  Lachowicz.
"Effect of Dual-stage Ageing and RRA Treatment  on the Three-body Abrasive Wear of the AW7075 Alloy." Strojniški vestnik - Journal of Mechanical Engineering [Online], 68.7-8 (2022): 493-505. Web.  12 Jun. 2024
TY  - JOUR
AU  - Lachowicz, Marzena 
AU  - Leśniewski, Tadeusz 
AU  - Lachowicz, Maciej 
PY  - 2022
TI  - Effect of Dual-stage Ageing and RRA Treatment  on the Three-body Abrasive Wear of the AW7075 Alloy
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2022.142
KW  - aluminum alloys; AW7075; abrasive wear; heat treatment; hardness; microstructure; 
N2  - The paper presents an analysis of the influence of the heat treatment state on the abrasive wear of the AW7075 aluminium alloy. To determine the hardening state, the material hardness was measured. It was found that hardness is not the only factor that influences this type of wear. For this reason, the influence of the emerging microstructure is also analysed in the considerations. After tribological tests, microscopic observations of surface features were carried out to determine the dominant mechanisms of surface damage. The results were extended by the hardness distribution carried out on the cross-section. There were no changes in hardness that could be related to either strain hardening or structural changes caused by friction.
UR  - https://www.sv-jme.eu/article/effect-of-dual-stage-aging-and-rra-treatment-on-the-three-body-abrasive-wear-of-the-aw7075-alloy/
@article{{sv-jme}{sv-jme.2022.142},
	author = {Lachowicz, M., Leśniewski, T., Lachowicz, M.},
	title = {Effect of Dual-stage Ageing and RRA Treatment  on the Three-body Abrasive Wear of the AW7075 Alloy},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {68},
	number = {7-8},
	year = {2022},
	doi = {10.5545/sv-jme.2022.142},
	url = {https://www.sv-jme.eu/article/effect-of-dual-stage-aging-and-rra-treatment-on-the-three-body-abrasive-wear-of-the-aw7075-alloy/}
}
TY  - JOUR
AU  - Lachowicz, Marzena 
AU  - Leśniewski, Tadeusz 
AU  - Lachowicz, Maciej 
PY  - 2022/05/30
TI  - Effect of Dual-stage Ageing and RRA Treatment  on the Three-body Abrasive Wear of the AW7075 Alloy
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 68, No 7-8 (2022): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2022.142
KW  - aluminum alloys, AW7075, abrasive wear, heat treatment, hardness, microstructure, 
N2  - The paper presents an analysis of the influence of the heat treatment state on the abrasive wear of the AW7075 aluminium alloy. To determine the hardening state, the material hardness was measured. It was found that hardness is not the only factor that influences this type of wear. For this reason, the influence of the emerging microstructure is also analysed in the considerations. After tribological tests, microscopic observations of surface features were carried out to determine the dominant mechanisms of surface damage. The results were extended by the hardness distribution carried out on the cross-section. There were no changes in hardness that could be related to either strain hardening or structural changes caused by friction.
UR  - https://www.sv-jme.eu/article/effect-of-dual-stage-aging-and-rra-treatment-on-the-three-body-abrasive-wear-of-the-aw7075-alloy/
Lachowicz, Marzena, Leśniewski, Tadeusz, AND Lachowicz, Maciej.
"Effect of Dual-stage Ageing and RRA Treatment  on the Three-body Abrasive Wear of the AW7075 Alloy" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 68 Number 7-8 (30 May 2022)

Authors

Affiliations

  • Wroclaw University of Science and Technology, Faculty of Mechanical Engineering, Poland 1

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 68(2022)7-8, 493-505
© The Authors 2022. CC BY 4.0 Int.

https://doi.org/10.5545/sv-jme.2022.142

The paper presents an analysis of the influence of the heat treatment state on the abrasive wear of the AW7075 aluminium alloy. To determine the hardening state, the material hardness was measured. It was found that hardness is not the only factor that influences this type of wear. For this reason, the influence of the emerging microstructure is also analysed in the considerations. After tribological tests, microscopic observations of surface features were carried out to determine the dominant mechanisms of surface damage. The results were extended by the hardness distribution carried out on the cross-section. There were no changes in hardness that could be related to either strain hardening or structural changes caused by friction.

aluminum alloys; AW7075; abrasive wear; heat treatment; hardness; microstructure;