WANG, Yueyong ;ZHANG, Yimin ;WANG, Yibing ;LONG, Risheng . Effects of Single/Compound Pit Texture on the Friction-induced Vibration and Noise of Thrust Cylindrical Roller Bearings. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 69, n.3-4, p. 87-99, february 2023. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/effects-of-singlecompound-pit-texture-on-friction-induced-vibration-and-noise-of-thrust-cylindrical-roller-bearings/>. Date accessed: 01 dec. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2022.455.
Wang, Y., Zhang, Y., Wang, Y., & Long, R. (2023). Effects of Single/Compound Pit Texture on the Friction-induced Vibration and Noise of Thrust Cylindrical Roller Bearings. Strojniški vestnik - Journal of Mechanical Engineering, 69(3-4), 87-99. doi:http://dx.doi.org/10.5545/sv-jme.2022.455
@article{sv-jmesv-jme.2022.455, author = {Yueyong Wang and Yimin Zhang and Yibing Wang and Risheng Long}, title = {Effects of Single/Compound Pit Texture on the Friction-induced Vibration and Noise of Thrust Cylindrical Roller Bearings}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {69}, number = {3-4}, year = {2023}, keywords = {thrust cylindrical roller bearings; single/compound pit texture; friction force; wear; friction-induced vibration and noise; }, abstract = {To improve the reliability and service life of thrust cylindrical roller bearings (TCRBs), the effects of single/compound pit texture on tribological properties and on friction-induced vibration and noise were studied. Laser marking equipment was used to create compound pit texture on a shaft washer. A universal friction and wear test rig was used to measure the friction force, vibration acceleration, and noise signals of TCRBs. The differences between the single/composite pit-textured and non-textured surfaces were studied in terms of the friction, wear, and vibration noise properties. The results revealed that the friction force and wear loss of the single/composite pit-textured surface were markedly lower than those of the non-textured surface. Compared to non-textured surface bearings, the friction force and wear loss for textured surface bearings were reduced by 39.6 % and 59.6 %, respectively, when the diameter, depth, and area density of the pit were 300 μm, 10 μm, and 10 %, respectively. The single/composite pit-textured surface exhibited good potential for vibration absorption and noise suppression. It could effectively interfere with the self-excited vibration of the TCRBs friction pair system, thereby reducing the degree of vibration noise of the TCRBs.}, issn = {0039-2480}, pages = {87-99}, doi = {10.5545/sv-jme.2022.455}, url = {https://www.sv-jme.eu/article/effects-of-singlecompound-pit-texture-on-friction-induced-vibration-and-noise-of-thrust-cylindrical-roller-bearings/} }
Wang, Y.,Zhang, Y.,Wang, Y.,Long, R. 2023 February 69. Effects of Single/Compound Pit Texture on the Friction-induced Vibration and Noise of Thrust Cylindrical Roller Bearings. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 69:3-4
%A Wang, Yueyong %A Zhang, Yimin %A Wang, Yibing %A Long, Risheng %D 2023 %T Effects of Single/Compound Pit Texture on the Friction-induced Vibration and Noise of Thrust Cylindrical Roller Bearings %B 2023 %9 thrust cylindrical roller bearings; single/compound pit texture; friction force; wear; friction-induced vibration and noise; %! Effects of Single/Compound Pit Texture on the Friction-induced Vibration and Noise of Thrust Cylindrical Roller Bearings %K thrust cylindrical roller bearings; single/compound pit texture; friction force; wear; friction-induced vibration and noise; %X To improve the reliability and service life of thrust cylindrical roller bearings (TCRBs), the effects of single/compound pit texture on tribological properties and on friction-induced vibration and noise were studied. Laser marking equipment was used to create compound pit texture on a shaft washer. A universal friction and wear test rig was used to measure the friction force, vibration acceleration, and noise signals of TCRBs. The differences between the single/composite pit-textured and non-textured surfaces were studied in terms of the friction, wear, and vibration noise properties. The results revealed that the friction force and wear loss of the single/composite pit-textured surface were markedly lower than those of the non-textured surface. Compared to non-textured surface bearings, the friction force and wear loss for textured surface bearings were reduced by 39.6 % and 59.6 %, respectively, when the diameter, depth, and area density of the pit were 300 μm, 10 μm, and 10 %, respectively. The single/composite pit-textured surface exhibited good potential for vibration absorption and noise suppression. It could effectively interfere with the self-excited vibration of the TCRBs friction pair system, thereby reducing the degree of vibration noise of the TCRBs. %U https://www.sv-jme.eu/article/effects-of-singlecompound-pit-texture-on-friction-induced-vibration-and-noise-of-thrust-cylindrical-roller-bearings/ %0 Journal Article %R 10.5545/sv-jme.2022.455 %& 87 %P 13 %J Strojniški vestnik - Journal of Mechanical Engineering %V 69 %N 3-4 %@ 0039-2480 %8 2023-02-13 %7 2023-02-13
Wang, Yueyong, Yimin Zhang, Yibing Wang, & Risheng Long. "Effects of Single/Compound Pit Texture on the Friction-induced Vibration and Noise of Thrust Cylindrical Roller Bearings." Strojniški vestnik - Journal of Mechanical Engineering [Online], 69.3-4 (2023): 87-99. Web. 01 Dec. 2024
TY - JOUR AU - Wang, Yueyong AU - Zhang, Yimin AU - Wang, Yibing AU - Long, Risheng PY - 2023 TI - Effects of Single/Compound Pit Texture on the Friction-induced Vibration and Noise of Thrust Cylindrical Roller Bearings JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2022.455 KW - thrust cylindrical roller bearings; single/compound pit texture; friction force; wear; friction-induced vibration and noise; N2 - To improve the reliability and service life of thrust cylindrical roller bearings (TCRBs), the effects of single/compound pit texture on tribological properties and on friction-induced vibration and noise were studied. Laser marking equipment was used to create compound pit texture on a shaft washer. A universal friction and wear test rig was used to measure the friction force, vibration acceleration, and noise signals of TCRBs. The differences between the single/composite pit-textured and non-textured surfaces were studied in terms of the friction, wear, and vibration noise properties. The results revealed that the friction force and wear loss of the single/composite pit-textured surface were markedly lower than those of the non-textured surface. Compared to non-textured surface bearings, the friction force and wear loss for textured surface bearings were reduced by 39.6 % and 59.6 %, respectively, when the diameter, depth, and area density of the pit were 300 μm, 10 μm, and 10 %, respectively. The single/composite pit-textured surface exhibited good potential for vibration absorption and noise suppression. It could effectively interfere with the self-excited vibration of the TCRBs friction pair system, thereby reducing the degree of vibration noise of the TCRBs. UR - https://www.sv-jme.eu/article/effects-of-singlecompound-pit-texture-on-friction-induced-vibration-and-noise-of-thrust-cylindrical-roller-bearings/
@article{{sv-jme}{sv-jme.2022.455}, author = {Wang, Y., Zhang, Y., Wang, Y., Long, R.}, title = {Effects of Single/Compound Pit Texture on the Friction-induced Vibration and Noise of Thrust Cylindrical Roller Bearings}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {69}, number = {3-4}, year = {2023}, doi = {10.5545/sv-jme.2022.455}, url = {https://www.sv-jme.eu/article/effects-of-singlecompound-pit-texture-on-friction-induced-vibration-and-noise-of-thrust-cylindrical-roller-bearings/} }
TY - JOUR AU - Wang, Yueyong AU - Zhang, Yimin AU - Wang, Yibing AU - Long, Risheng PY - 2023/02/13 TI - Effects of Single/Compound Pit Texture on the Friction-induced Vibration and Noise of Thrust Cylindrical Roller Bearings JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 69, No 3-4 (2023): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2022.455 KW - thrust cylindrical roller bearings, single/compound pit texture, friction force, wear, friction-induced vibration and noise, N2 - To improve the reliability and service life of thrust cylindrical roller bearings (TCRBs), the effects of single/compound pit texture on tribological properties and on friction-induced vibration and noise were studied. Laser marking equipment was used to create compound pit texture on a shaft washer. A universal friction and wear test rig was used to measure the friction force, vibration acceleration, and noise signals of TCRBs. The differences between the single/composite pit-textured and non-textured surfaces were studied in terms of the friction, wear, and vibration noise properties. The results revealed that the friction force and wear loss of the single/composite pit-textured surface were markedly lower than those of the non-textured surface. Compared to non-textured surface bearings, the friction force and wear loss for textured surface bearings were reduced by 39.6 % and 59.6 %, respectively, when the diameter, depth, and area density of the pit were 300 μm, 10 μm, and 10 %, respectively. The single/composite pit-textured surface exhibited good potential for vibration absorption and noise suppression. It could effectively interfere with the self-excited vibration of the TCRBs friction pair system, thereby reducing the degree of vibration noise of the TCRBs. UR - https://www.sv-jme.eu/article/effects-of-singlecompound-pit-texture-on-friction-induced-vibration-and-noise-of-thrust-cylindrical-roller-bearings/
Wang, Yueyong, Zhang, Yimin, Wang, Yibing, AND Long, Risheng. "Effects of Single/Compound Pit Texture on the Friction-induced Vibration and Noise of Thrust Cylindrical Roller Bearings" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 69 Number 3-4 (13 February 2023)
Strojniški vestnik - Journal of Mechanical Engineering 69(2023)3-4, 87-99
© The Authors 2023. CC BY 4.0 Int.
To improve the reliability and service life of thrust cylindrical roller bearings (TCRBs), the effects of single/compound pit texture on tribological properties and on friction-induced vibration and noise were studied. Laser marking equipment was used to create compound pit texture on a shaft washer. A universal friction and wear test rig was used to measure the friction force, vibration acceleration, and noise signals of TCRBs. The differences between the single/composite pit-textured and non-textured surfaces were studied in terms of the friction, wear, and vibration noise properties. The results revealed that the friction force and wear loss of the single/composite pit-textured surface were markedly lower than those of the non-textured surface. Compared to non-textured surface bearings, the friction force and wear loss for textured surface bearings were reduced by 39.6 % and 59.6 %, respectively, when the diameter, depth, and area density of the pit were 300 μm, 10 μm, and 10 %, respectively. The single/composite pit-textured surface exhibited good potential for vibration absorption and noise suppression. It could effectively interfere with the self-excited vibration of the TCRBs friction pair system, thereby reducing the degree of vibration noise of the TCRBs.