Elasto-Plastic Deformation Analysis of a Rear-Underrun Protection Device for Load-Carrying Vehicles

1700 Views
1006 Downloads
Export citation: ABNT
GLAVAČ, Matej ;PRAŠNIČKI, Martin ;REN, Zoran .
Elasto-Plastic Deformation Analysis of a Rear-Underrun Protection Device for Load-Carrying Vehicles. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 47, n.11, p. 654-661, july 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/elasto-plastic-deformation-analysis-of-a-rear-underrun-protection-device-for-load-carrying-vehicles/>. Date accessed: 07 oct. 2024. 
doi:http://dx.doi.org/.
Glavač, M., Prašnički, M., & Ren, Z.
(2001).
Elasto-Plastic Deformation Analysis of a Rear-Underrun Protection Device for Load-Carrying Vehicles.
Strojniški vestnik - Journal of Mechanical Engineering, 47(11), 654-661.
doi:http://dx.doi.org/
@article{.,
	author = {Matej  Glavač and Martin  Prašnički and Zoran  Ren},
	title = {Elasto-Plastic Deformation Analysis of a Rear-Underrun Protection Device for Load-Carrying Vehicles},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {47},
	number = {11},
	year = {2001},
	keywords = {protection devices; rear underrun protection; experimental testing; computational simulations; },
	abstract = {The paper describes a procedure for simulating the elasto-plastic behaviour of a rear-underrun protection device (RUPD), which can be used to estimate whether the design fulfils the ECE R 58 regulation. This regulation prescribes practical device testing, but also allows a computational safety inspection of the protection device. The paper also includes the development of the elasto-plastic computational simulation using the finite-element method that was presented at IAT 99 [5]. The results of the elasto-plastic analysis simulations lead to the conclusion that this method can be used to optimize the RUPD in the design process without the need for practical testing. Computational simulation also reduces the cost of the approval procedure.},
	issn = {0039-2480},	pages = {654-661},	doi = {},
	url = {https://www.sv-jme.eu/article/elasto-plastic-deformation-analysis-of-a-rear-underrun-protection-device-for-load-carrying-vehicles/}
}
Glavač, M.,Prašnički, M.,Ren, Z.
2001 July 47. Elasto-Plastic Deformation Analysis of a Rear-Underrun Protection Device for Load-Carrying Vehicles. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 47:11
%A Glavač, Matej 
%A Prašnički, Martin 
%A Ren, Zoran 
%D 2001
%T Elasto-Plastic Deformation Analysis of a Rear-Underrun Protection Device for Load-Carrying Vehicles
%B 2001
%9 protection devices; rear underrun protection; experimental testing; computational simulations; 
%! Elasto-Plastic Deformation Analysis of a Rear-Underrun Protection Device for Load-Carrying Vehicles
%K protection devices; rear underrun protection; experimental testing; computational simulations; 
%X The paper describes a procedure for simulating the elasto-plastic behaviour of a rear-underrun protection device (RUPD), which can be used to estimate whether the design fulfils the ECE R 58 regulation. This regulation prescribes practical device testing, but also allows a computational safety inspection of the protection device. The paper also includes the development of the elasto-plastic computational simulation using the finite-element method that was presented at IAT 99 [5]. The results of the elasto-plastic analysis simulations lead to the conclusion that this method can be used to optimize the RUPD in the design process without the need for practical testing. Computational simulation also reduces the cost of the approval procedure.
%U https://www.sv-jme.eu/article/elasto-plastic-deformation-analysis-of-a-rear-underrun-protection-device-for-load-carrying-vehicles/
%0 Journal Article
%R 
%& 654
%P 8
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 47
%N 11
%@ 0039-2480
%8 2017-07-07
%7 2017-07-07
Glavač, Matej, Martin  Prašnički, & Zoran  Ren.
"Elasto-Plastic Deformation Analysis of a Rear-Underrun Protection Device for Load-Carrying Vehicles." Strojniški vestnik - Journal of Mechanical Engineering [Online], 47.11 (2001): 654-661. Web.  07 Oct. 2024
TY  - JOUR
AU  - Glavač, Matej 
AU  - Prašnički, Martin 
AU  - Ren, Zoran 
PY  - 2001
TI  - Elasto-Plastic Deformation Analysis of a Rear-Underrun Protection Device for Load-Carrying Vehicles
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - protection devices; rear underrun protection; experimental testing; computational simulations; 
N2  - The paper describes a procedure for simulating the elasto-plastic behaviour of a rear-underrun protection device (RUPD), which can be used to estimate whether the design fulfils the ECE R 58 regulation. This regulation prescribes practical device testing, but also allows a computational safety inspection of the protection device. The paper also includes the development of the elasto-plastic computational simulation using the finite-element method that was presented at IAT 99 [5]. The results of the elasto-plastic analysis simulations lead to the conclusion that this method can be used to optimize the RUPD in the design process without the need for practical testing. Computational simulation also reduces the cost of the approval procedure.
UR  - https://www.sv-jme.eu/article/elasto-plastic-deformation-analysis-of-a-rear-underrun-protection-device-for-load-carrying-vehicles/
@article{{}{.},
	author = {Glavač, M., Prašnički, M., Ren, Z.},
	title = {Elasto-Plastic Deformation Analysis of a Rear-Underrun Protection Device for Load-Carrying Vehicles},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {47},
	number = {11},
	year = {2001},
	doi = {},
	url = {https://www.sv-jme.eu/article/elasto-plastic-deformation-analysis-of-a-rear-underrun-protection-device-for-load-carrying-vehicles/}
}
TY  - JOUR
AU  - Glavač, Matej 
AU  - Prašnički, Martin 
AU  - Ren, Zoran 
PY  - 2017/07/07
TI  - Elasto-Plastic Deformation Analysis of a Rear-Underrun Protection Device for Load-Carrying Vehicles
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 47, No 11 (2001): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - protection devices, rear underrun protection, experimental testing, computational simulations, 
N2  - The paper describes a procedure for simulating the elasto-plastic behaviour of a rear-underrun protection device (RUPD), which can be used to estimate whether the design fulfils the ECE R 58 regulation. This regulation prescribes practical device testing, but also allows a computational safety inspection of the protection device. The paper also includes the development of the elasto-plastic computational simulation using the finite-element method that was presented at IAT 99 [5]. The results of the elasto-plastic analysis simulations lead to the conclusion that this method can be used to optimize the RUPD in the design process without the need for practical testing. Computational simulation also reduces the cost of the approval procedure.
UR  - https://www.sv-jme.eu/article/elasto-plastic-deformation-analysis-of-a-rear-underrun-protection-device-for-load-carrying-vehicles/
Glavač, Matej, Prašnički, Martin, AND Ren, Zoran.
"Elasto-Plastic Deformation Analysis of a Rear-Underrun Protection Device for Load-Carrying Vehicles" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 47 Number 11 (07 July 2017)

Authors

Affiliations

  • RTI Ltd., Maribor, Slovenia
  • RTI Ltd., Maribor, Slovenia
  • University of Maribor, Faculty of Mechanical Engineering, Slovenia

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 47(2001)11, 654-661
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

The paper describes a procedure for simulating the elasto-plastic behaviour of a rear-underrun protection device (RUPD), which can be used to estimate whether the design fulfils the ECE R 58 regulation. This regulation prescribes practical device testing, but also allows a computational safety inspection of the protection device. The paper also includes the development of the elasto-plastic computational simulation using the finite-element method that was presented at IAT 99 [5]. The results of the elasto-plastic analysis simulations lead to the conclusion that this method can be used to optimize the RUPD in the design process without the need for practical testing. Computational simulation also reduces the cost of the approval procedure.

protection devices; rear underrun protection; experimental testing; computational simulations;