Equipment and Methods for Ultrasonic Fatigue Evaluation of Metals

571 Views
206 Downloads
Export citation: ABNT
PUŠKAR, Anton ;BUKOVKA, Otokar ;PALČEK, Peter ;NICOLETTO, Gianni .
Equipment and Methods for Ultrasonic Fatigue Evaluation of Metals. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 42, n.11-12, p. 351-362, july 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/equipment-and-methods-for-ultrasonic-fatigue-evaluation-of-metals/>. Date accessed: 17 feb. 2020. 
doi:http://dx.doi.org/.
Puškar, A., Bukovka, O., Palček, P., & Nicoletto, G.
(1996).
Equipment and Methods for Ultrasonic Fatigue Evaluation of Metals.
Strojniški vestnik - Journal of Mechanical Engineering, 42(11-12), 351-362.
doi:http://dx.doi.org/
@article{.,
	author = {Anton  Puškar and Otokar  Bukovka and Peter  Palček and Gianni  Nicoletto},
	title = {Equipment and Methods for Ultrasonic Fatigue Evaluation of Metals},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {42},
	number = {11-12},
	year = {1996},
	keywords = {Ultrasonic Fatigue; Evaluation of Metals; },
	abstract = {Shown is a dynamic model of periodic circular cutting of oriented wood tissue in which both the properties of the material and the dynamic properties of the machining system have been considered. The cutting or exciting force is the result of internal and external modulation. The internal modulation is the result of the effect of the properties of the machined material which are given by specific cutting pressure, while the external modulation is the consequence of the varying material flux which affected by relative displacements between the workpiece and the tool. Relative displacements, which are the consequence of the manner of excitation and dynamic properties of the machining system, are also the cause of self-excitation occurrence. As in the process of cutting, the cutting or self-exciting force depends on relative displacements between the tool and the workpiece, the dynamic model developed is non-linear. By simulation of a dynamic model it is possible to analyse the process of cutting wood tissue in its entirety, and it can thus be employed to optimize the selection of tools and the processing parameters of machining.},
	issn = {0039-2480},	pages = {351-362},	doi = {},
	url = {https://www.sv-jme.eu/article/equipment-and-methods-for-ultrasonic-fatigue-evaluation-of-metals/}
}
Puškar, A.,Bukovka, O.,Palček, P.,Nicoletto, G.
1996 July 42. Equipment and Methods for Ultrasonic Fatigue Evaluation of Metals. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 42:11-12
%A Puškar, Anton 
%A Bukovka, Otokar 
%A Palček, Peter 
%A Nicoletto, Gianni 
%D 1996
%T Equipment and Methods for Ultrasonic Fatigue Evaluation of Metals
%B 1996
%9 Ultrasonic Fatigue; Evaluation of Metals; 
%! Equipment and Methods for Ultrasonic Fatigue Evaluation of Metals
%K Ultrasonic Fatigue; Evaluation of Metals; 
%X Shown is a dynamic model of periodic circular cutting of oriented wood tissue in which both the properties of the material and the dynamic properties of the machining system have been considered. The cutting or exciting force is the result of internal and external modulation. The internal modulation is the result of the effect of the properties of the machined material which are given by specific cutting pressure, while the external modulation is the consequence of the varying material flux which affected by relative displacements between the workpiece and the tool. Relative displacements, which are the consequence of the manner of excitation and dynamic properties of the machining system, are also the cause of self-excitation occurrence. As in the process of cutting, the cutting or self-exciting force depends on relative displacements between the tool and the workpiece, the dynamic model developed is non-linear. By simulation of a dynamic model it is possible to analyse the process of cutting wood tissue in its entirety, and it can thus be employed to optimize the selection of tools and the processing parameters of machining.
%U https://www.sv-jme.eu/article/equipment-and-methods-for-ultrasonic-fatigue-evaluation-of-metals/
%0 Journal Article
%R 
%& 351
%P 12
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 42
%N 11-12
%@ 0039-2480
%8 2017-07-06
%7 2017-07-06
Puškar, Anton, Otokar  Bukovka, Peter  Palček, & Gianni  Nicoletto.
"Equipment and Methods for Ultrasonic Fatigue Evaluation of Metals." Strojniški vestnik - Journal of Mechanical Engineering [Online], 42.11-12 (1996): 351-362. Web.  17 Feb. 2020
TY  - JOUR
AU  - Puškar, Anton 
AU  - Bukovka, Otokar 
AU  - Palček, Peter 
AU  - Nicoletto, Gianni 
PY  - 1996
TI  - Equipment and Methods for Ultrasonic Fatigue Evaluation of Metals
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - Ultrasonic Fatigue; Evaluation of Metals; 
N2  - Shown is a dynamic model of periodic circular cutting of oriented wood tissue in which both the properties of the material and the dynamic properties of the machining system have been considered. The cutting or exciting force is the result of internal and external modulation. The internal modulation is the result of the effect of the properties of the machined material which are given by specific cutting pressure, while the external modulation is the consequence of the varying material flux which affected by relative displacements between the workpiece and the tool. Relative displacements, which are the consequence of the manner of excitation and dynamic properties of the machining system, are also the cause of self-excitation occurrence. As in the process of cutting, the cutting or self-exciting force depends on relative displacements between the tool and the workpiece, the dynamic model developed is non-linear. By simulation of a dynamic model it is possible to analyse the process of cutting wood tissue in its entirety, and it can thus be employed to optimize the selection of tools and the processing parameters of machining.
UR  - https://www.sv-jme.eu/article/equipment-and-methods-for-ultrasonic-fatigue-evaluation-of-metals/
@article{{}{.},
	author = {Puškar, A., Bukovka, O., Palček, P., Nicoletto, G.},
	title = {Equipment and Methods for Ultrasonic Fatigue Evaluation of Metals},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {42},
	number = {11-12},
	year = {1996},
	doi = {},
	url = {https://www.sv-jme.eu/article/equipment-and-methods-for-ultrasonic-fatigue-evaluation-of-metals/}
}
TY  - JOUR
AU  - Puškar, Anton 
AU  - Bukovka, Otokar 
AU  - Palček, Peter 
AU  - Nicoletto, Gianni 
PY  - 2017/07/06
TI  - Equipment and Methods for Ultrasonic Fatigue Evaluation of Metals
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 42, No 11-12 (1996): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - Ultrasonic Fatigue, Evaluation of Metals, 
N2  - Shown is a dynamic model of periodic circular cutting of oriented wood tissue in which both the properties of the material and the dynamic properties of the machining system have been considered. The cutting or exciting force is the result of internal and external modulation. The internal modulation is the result of the effect of the properties of the machined material which are given by specific cutting pressure, while the external modulation is the consequence of the varying material flux which affected by relative displacements between the workpiece and the tool. Relative displacements, which are the consequence of the manner of excitation and dynamic properties of the machining system, are also the cause of self-excitation occurrence. As in the process of cutting, the cutting or self-exciting force depends on relative displacements between the tool and the workpiece, the dynamic model developed is non-linear. By simulation of a dynamic model it is possible to analyse the process of cutting wood tissue in its entirety, and it can thus be employed to optimize the selection of tools and the processing parameters of machining.
UR  - https://www.sv-jme.eu/article/equipment-and-methods-for-ultrasonic-fatigue-evaluation-of-metals/
Puškar, Anton, Bukovka, Otokar, Palček, Peter, AND Nicoletto, Gianni.
"Equipment and Methods for Ultrasonic Fatigue Evaluation of Metals" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 42 Number 11-12 (06 July 2017)

Authors

Affiliations

  • Strojnicka fakulta, Žilina, Slovaška republika
  • Strojnicka fakulta, Žilina, Slovaška republika
  • Strojnicka fakulta, Žilina, Slovaška republika
  • Viale delle Scienze, Parma, Italia

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 42(1996)11-12, 351-362

Shown is a dynamic model of periodic circular cutting of oriented wood tissue in which both the properties of the material and the dynamic properties of the machining system have been considered. The cutting or exciting force is the result of internal and external modulation. The internal modulation is the result of the effect of the properties of the machined material which are given by specific cutting pressure, while the external modulation is the consequence of the varying material flux which affected by relative displacements between the workpiece and the tool. Relative displacements, which are the consequence of the manner of excitation and dynamic properties of the machining system, are also the cause of self-excitation occurrence. As in the process of cutting, the cutting or self-exciting force depends on relative displacements between the tool and the workpiece, the dynamic model developed is non-linear. By simulation of a dynamic model it is possible to analyse the process of cutting wood tissue in its entirety, and it can thus be employed to optimize the selection of tools and the processing parameters of machining.

Ultrasonic Fatigue; Evaluation of Metals;