ŠKRLEC, Andrej ;KLEMENC, Jernej . Estimating the Strain-Rate-Dependent Parameters of the Cowper-Symonds and Johnson-Cook Material Models using Taguchi Arrays. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 62, n.4, p. 220-230, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/estimating-the-strain-rate-dependent-parameters-of-the-cowper-symonds-and-johnson-cook-material-models-using-taguchi-arrays/>. Date accessed: 04 oct. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2015.3266.
Škrlec, A., & Klemenc, J. (2016). Estimating the Strain-Rate-Dependent Parameters of the Cowper-Symonds and Johnson-Cook Material Models using Taguchi Arrays. Strojniški vestnik - Journal of Mechanical Engineering, 62(4), 220-230. doi:http://dx.doi.org/10.5545/sv-jme.2015.3266
@article{sv-jmesv-jme.2015.3266, author = {Andrej Škrlec and Jernej Klemenc}, title = {Estimating the Strain-Rate-Dependent Parameters of the Cowper-Symonds and Johnson-Cook Material Models using Taguchi Arrays}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {62}, number = {4}, year = {2016}, keywords = {strain-rate dependent material behaviour; finite element method; explicit dynamics; Taguchi arrays}, abstract = {In order to reduce R&D costs, a product’s behaviour during use is predicted with numerical simulations in the early phases of R&D. If a structure is subjected to high-strain-rate loading this effect should be considered in the material models that are used for the numerical simulations. This article shows how the strain-rate-dependent material parameters can be determined by combining the experimental data with the numerical simulations. The presented methodology is based on the application of Taguchi arrays to find the most appropriate values for the strain-rate-dependent parameters. The presented methodology is applied in a practical case, for which the parameters of the Cowper-Symonds and Johnson-Cook material models are estimated.}, issn = {0039-2480}, pages = {220-230}, doi = {10.5545/sv-jme.2015.3266}, url = {https://www.sv-jme.eu/article/estimating-the-strain-rate-dependent-parameters-of-the-cowper-symonds-and-johnson-cook-material-models-using-taguchi-arrays/} }
Škrlec, A.,Klemenc, J. 2016 June 62. Estimating the Strain-Rate-Dependent Parameters of the Cowper-Symonds and Johnson-Cook Material Models using Taguchi Arrays. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 62:4
%A Škrlec, Andrej %A Klemenc, Jernej %D 2016 %T Estimating the Strain-Rate-Dependent Parameters of the Cowper-Symonds and Johnson-Cook Material Models using Taguchi Arrays %B 2016 %9 strain-rate dependent material behaviour; finite element method; explicit dynamics; Taguchi arrays %! Estimating the Strain-Rate-Dependent Parameters of the Cowper-Symonds and Johnson-Cook Material Models using Taguchi Arrays %K strain-rate dependent material behaviour; finite element method; explicit dynamics; Taguchi arrays %X In order to reduce R&D costs, a product’s behaviour during use is predicted with numerical simulations in the early phases of R&D. If a structure is subjected to high-strain-rate loading this effect should be considered in the material models that are used for the numerical simulations. This article shows how the strain-rate-dependent material parameters can be determined by combining the experimental data with the numerical simulations. The presented methodology is based on the application of Taguchi arrays to find the most appropriate values for the strain-rate-dependent parameters. The presented methodology is applied in a practical case, for which the parameters of the Cowper-Symonds and Johnson-Cook material models are estimated. %U https://www.sv-jme.eu/article/estimating-the-strain-rate-dependent-parameters-of-the-cowper-symonds-and-johnson-cook-material-models-using-taguchi-arrays/ %0 Journal Article %R 10.5545/sv-jme.2015.3266 %& 220 %P 11 %J Strojniški vestnik - Journal of Mechanical Engineering %V 62 %N 4 %@ 0039-2480 %8 2018-06-27 %7 2018-06-27
Škrlec, Andrej, & Jernej Klemenc. "Estimating the Strain-Rate-Dependent Parameters of the Cowper-Symonds and Johnson-Cook Material Models using Taguchi Arrays." Strojniški vestnik - Journal of Mechanical Engineering [Online], 62.4 (2016): 220-230. Web. 04 Oct. 2024
TY - JOUR AU - Škrlec, Andrej AU - Klemenc, Jernej PY - 2016 TI - Estimating the Strain-Rate-Dependent Parameters of the Cowper-Symonds and Johnson-Cook Material Models using Taguchi Arrays JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2015.3266 KW - strain-rate dependent material behaviour; finite element method; explicit dynamics; Taguchi arrays N2 - In order to reduce R&D costs, a product’s behaviour during use is predicted with numerical simulations in the early phases of R&D. If a structure is subjected to high-strain-rate loading this effect should be considered in the material models that are used for the numerical simulations. This article shows how the strain-rate-dependent material parameters can be determined by combining the experimental data with the numerical simulations. The presented methodology is based on the application of Taguchi arrays to find the most appropriate values for the strain-rate-dependent parameters. The presented methodology is applied in a practical case, for which the parameters of the Cowper-Symonds and Johnson-Cook material models are estimated. UR - https://www.sv-jme.eu/article/estimating-the-strain-rate-dependent-parameters-of-the-cowper-symonds-and-johnson-cook-material-models-using-taguchi-arrays/
@article{{sv-jme}{sv-jme.2015.3266}, author = {Škrlec, A., Klemenc, J.}, title = {Estimating the Strain-Rate-Dependent Parameters of the Cowper-Symonds and Johnson-Cook Material Models using Taguchi Arrays}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {62}, number = {4}, year = {2016}, doi = {10.5545/sv-jme.2015.3266}, url = {https://www.sv-jme.eu/article/estimating-the-strain-rate-dependent-parameters-of-the-cowper-symonds-and-johnson-cook-material-models-using-taguchi-arrays/} }
TY - JOUR AU - Škrlec, Andrej AU - Klemenc, Jernej PY - 2018/06/27 TI - Estimating the Strain-Rate-Dependent Parameters of the Cowper-Symonds and Johnson-Cook Material Models using Taguchi Arrays JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 62, No 4 (2016): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2015.3266 KW - strain-rate dependent material behaviour, finite element method, explicit dynamics, Taguchi arrays N2 - In order to reduce R&D costs, a product’s behaviour during use is predicted with numerical simulations in the early phases of R&D. If a structure is subjected to high-strain-rate loading this effect should be considered in the material models that are used for the numerical simulations. This article shows how the strain-rate-dependent material parameters can be determined by combining the experimental data with the numerical simulations. The presented methodology is based on the application of Taguchi arrays to find the most appropriate values for the strain-rate-dependent parameters. The presented methodology is applied in a practical case, for which the parameters of the Cowper-Symonds and Johnson-Cook material models are estimated. UR - https://www.sv-jme.eu/article/estimating-the-strain-rate-dependent-parameters-of-the-cowper-symonds-and-johnson-cook-material-models-using-taguchi-arrays/
Škrlec, Andrej, AND Klemenc, Jernej. "Estimating the Strain-Rate-Dependent Parameters of the Cowper-Symonds and Johnson-Cook Material Models using Taguchi Arrays" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 62 Number 4 (27 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 62(2016)4, 220-230
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
In order to reduce R&D costs, a product’s behaviour during use is predicted with numerical simulations in the early phases of R&D. If a structure is subjected to high-strain-rate loading this effect should be considered in the material models that are used for the numerical simulations. This article shows how the strain-rate-dependent material parameters can be determined by combining the experimental data with the numerical simulations. The presented methodology is based on the application of Taguchi arrays to find the most appropriate values for the strain-rate-dependent parameters. The presented methodology is applied in a practical case, for which the parameters of the Cowper-Symonds and Johnson-Cook material models are estimated.