FETVACI, Cuneyt . Generation Simulation of Involute Spur Gears Machined by Pinion-Type Shaper Cutters. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 56, n.10, p. 644-652, october 2017. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/generation-simulation-of-involute-spur-gears-machined-by-pinion-type-shaper-cutters/>. Date accessed: 18 apr. 2024. doi:http://dx.doi.org/.
Fetvaci, C. (2010). Generation Simulation of Involute Spur Gears Machined by Pinion-Type Shaper Cutters. Strojniški vestnik - Journal of Mechanical Engineering, 56(10), 644-652. doi:http://dx.doi.org/
@article{.,
author = {Cuneyt Fetvaci},
title = {Generation Simulation of Involute Spur Gears Machined by Pinion-Type Shaper Cutters},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {56},
number = {10},
year = {2010},
keywords = {asymmetric involute teeth; gear design; gear shaper; generation simulation; spur gears; trochoidal fillet; },
abstract = {A pinion-type shaper cutter is considered as the generating tool for the generation of the gear, and a mathematical model of spur gears with asymmetric involute teeth is given according to the gearing theory. The equations of the profile of the cutter, the principle of coordinate transformation, the theory of differential geometry, and the theory of gearing are applied for describing generating and generated surfaces. Trochoidal envelope traced by cutter during the generating process is also investigated. Trochoidal curves of the cutter depends on the type of tip rounding. Computer graphs of involute spur gears are presented based on the given model. In addition, generation simulation is illustrated. The simulated motion path of the cutter can be used to determine chip geometry for further analysis. The results of this research should be helpful in the design and manufacture of spur gears.},
issn = {0039-2480}, pages = {644-652}, doi = {},
url = {https://www.sv-jme.eu/article/generation-simulation-of-involute-spur-gears-machined-by-pinion-type-shaper-cutters/}
}
Fetvaci, C. 2010 October 56. Generation Simulation of Involute Spur Gears Machined by Pinion-Type Shaper Cutters. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 56:10
%A Fetvaci, Cuneyt %D 2010 %T Generation Simulation of Involute Spur Gears Machined by Pinion-Type Shaper Cutters %B 2010 %9 asymmetric involute teeth; gear design; gear shaper; generation simulation; spur gears; trochoidal fillet; %! Generation Simulation of Involute Spur Gears Machined by Pinion-Type Shaper Cutters %K asymmetric involute teeth; gear design; gear shaper; generation simulation; spur gears; trochoidal fillet; %X A pinion-type shaper cutter is considered as the generating tool for the generation of the gear, and a mathematical model of spur gears with asymmetric involute teeth is given according to the gearing theory. The equations of the profile of the cutter, the principle of coordinate transformation, the theory of differential geometry, and the theory of gearing are applied for describing generating and generated surfaces. Trochoidal envelope traced by cutter during the generating process is also investigated. Trochoidal curves of the cutter depends on the type of tip rounding. Computer graphs of involute spur gears are presented based on the given model. In addition, generation simulation is illustrated. The simulated motion path of the cutter can be used to determine chip geometry for further analysis. The results of this research should be helpful in the design and manufacture of spur gears. %U https://www.sv-jme.eu/article/generation-simulation-of-involute-spur-gears-machined-by-pinion-type-shaper-cutters/ %0 Journal Article %R %& 644 %P 9 %J Strojniški vestnik - Journal of Mechanical Engineering %V 56 %N 10 %@ 0039-2480 %8 2017-10-24 %7 2017-10-24
Fetvaci, Cuneyt. "Generation Simulation of Involute Spur Gears Machined by Pinion-Type Shaper Cutters." Strojniški vestnik - Journal of Mechanical Engineering [Online], 56.10 (2010): 644-652. Web. 18 Apr. 2024
TY - JOUR AU - Fetvaci, Cuneyt PY - 2010 TI - Generation Simulation of Involute Spur Gears Machined by Pinion-Type Shaper Cutters JF - Strojniški vestnik - Journal of Mechanical Engineering DO - KW - asymmetric involute teeth; gear design; gear shaper; generation simulation; spur gears; trochoidal fillet; N2 - A pinion-type shaper cutter is considered as the generating tool for the generation of the gear, and a mathematical model of spur gears with asymmetric involute teeth is given according to the gearing theory. The equations of the profile of the cutter, the principle of coordinate transformation, the theory of differential geometry, and the theory of gearing are applied for describing generating and generated surfaces. Trochoidal envelope traced by cutter during the generating process is also investigated. Trochoidal curves of the cutter depends on the type of tip rounding. Computer graphs of involute spur gears are presented based on the given model. In addition, generation simulation is illustrated. The simulated motion path of the cutter can be used to determine chip geometry for further analysis. The results of this research should be helpful in the design and manufacture of spur gears. UR - https://www.sv-jme.eu/article/generation-simulation-of-involute-spur-gears-machined-by-pinion-type-shaper-cutters/
@article{{}{.},
author = {Fetvaci, C.},
title = {Generation Simulation of Involute Spur Gears Machined by Pinion-Type Shaper Cutters},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {56},
number = {10},
year = {2010},
doi = {},
url = {https://www.sv-jme.eu/article/generation-simulation-of-involute-spur-gears-machined-by-pinion-type-shaper-cutters/}
}
TY - JOUR AU - Fetvaci, Cuneyt PY - 2017/10/24 TI - Generation Simulation of Involute Spur Gears Machined by Pinion-Type Shaper Cutters JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 56, No 10 (2010): Strojniški vestnik - Journal of Mechanical Engineering DO - KW - asymmetric involute teeth, gear design, gear shaper, generation simulation, spur gears, trochoidal fillet, N2 - A pinion-type shaper cutter is considered as the generating tool for the generation of the gear, and a mathematical model of spur gears with asymmetric involute teeth is given according to the gearing theory. The equations of the profile of the cutter, the principle of coordinate transformation, the theory of differential geometry, and the theory of gearing are applied for describing generating and generated surfaces. Trochoidal envelope traced by cutter during the generating process is also investigated. Trochoidal curves of the cutter depends on the type of tip rounding. Computer graphs of involute spur gears are presented based on the given model. In addition, generation simulation is illustrated. The simulated motion path of the cutter can be used to determine chip geometry for further analysis. The results of this research should be helpful in the design and manufacture of spur gears. UR - https://www.sv-jme.eu/article/generation-simulation-of-involute-spur-gears-machined-by-pinion-type-shaper-cutters/
Fetvaci, Cuneyt"Generation Simulation of Involute Spur Gears Machined by Pinion-Type Shaper Cutters" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 56 Number 10 (24 October 2017)
Strojniški vestnik - Journal of Mechanical Engineering 56(2010)10, 644-652
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
A pinion-type shaper cutter is considered as the generating tool for the generation of the gear, and a mathematical model of spur gears with asymmetric involute teeth is given according to the gearing theory. The equations of the profile of the cutter, the principle of coordinate transformation, the theory of differential geometry, and the theory of gearing are applied for describing generating and generated surfaces. Trochoidal envelope traced by cutter during the generating process is also investigated. Trochoidal curves of the cutter depends on the type of tip rounding. Computer graphs of involute spur gears are presented based on the given model. In addition, generation simulation is illustrated. The simulated motion path of the cutter can be used to determine chip geometry for further analysis. The results of this research should be helpful in the design and manufacture of spur gears.