Heat Compressor for Adsorption Cooling

704 Views
352 Downloads
Export citation: ABNT
CERKVENIK, Boštjan ;POREDOŠ, Alojz .
Heat Compressor for Adsorption Cooling. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 44, n.3-4, p. 84-96, november 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/heat-compressor-for-adsorption-cooling/>. Date accessed: 30 may. 2020. 
doi:http://dx.doi.org/.
Cerkvenik, B., & Poredoš, A.
(1998).
Heat Compressor for Adsorption Cooling.
Strojniški vestnik - Journal of Mechanical Engineering, 44(3-4), 84-96.
doi:http://dx.doi.org/
@article{.,
	author = {Boštjan  Cerkvenik and Alojz  Poredoš},
	title = {Heat Compressor for Adsorption Cooling},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {44},
	number = {3-4},
	year = {1998},
	keywords = {heat compressor; adsorption cooling; heat transfer; mathematical model; },
	abstract = {In adsorption cooling processes, the engineer faces the problem of inefficient heat and mass transfer in the heat compressor. This results in small specific cooling power of the device, which determines its size or the amount of adsorbent necessary for an undisturbed cooling process. With new designs of heat exchangers in heat compressors, heat and mass transfer can be considerably more efficient. One possible design is a heat compressor with a compact layer of adsorbent. The paper presents a mathematical model of heat and mass transfer into a compact homogeneous layer located on the heat exchanger tube in the compressor of an adsorption cooling device. The operation of the cooling device is described and the results of simulation for a case concerning several parallel tubes in a heat compressor are analysed. The values of the coefficient of performance are analysed with regard to the number of tubes and layer thickness. It was established that the intensity of the process which takes place in the heat processor is influenced to a considerable extent by the type of material from which the compact layer is made, and less by the layer ’s structure.},
	issn = {0039-2480},	pages = {84-96},	doi = {},
	url = {https://www.sv-jme.eu/article/heat-compressor-for-adsorption-cooling/}
}
Cerkvenik, B.,Poredoš, A.
1998 November 44. Heat Compressor for Adsorption Cooling. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 44:3-4
%A Cerkvenik, Boštjan 
%A Poredoš, Alojz 
%D 1998
%T Heat Compressor for Adsorption Cooling
%B 1998
%9 heat compressor; adsorption cooling; heat transfer; mathematical model; 
%! Heat Compressor for Adsorption Cooling
%K heat compressor; adsorption cooling; heat transfer; mathematical model; 
%X In adsorption cooling processes, the engineer faces the problem of inefficient heat and mass transfer in the heat compressor. This results in small specific cooling power of the device, which determines its size or the amount of adsorbent necessary for an undisturbed cooling process. With new designs of heat exchangers in heat compressors, heat and mass transfer can be considerably more efficient. One possible design is a heat compressor with a compact layer of adsorbent. The paper presents a mathematical model of heat and mass transfer into a compact homogeneous layer located on the heat exchanger tube in the compressor of an adsorption cooling device. The operation of the cooling device is described and the results of simulation for a case concerning several parallel tubes in a heat compressor are analysed. The values of the coefficient of performance are analysed with regard to the number of tubes and layer thickness. It was established that the intensity of the process which takes place in the heat processor is influenced to a considerable extent by the type of material from which the compact layer is made, and less by the layer ’s structure.
%U https://www.sv-jme.eu/article/heat-compressor-for-adsorption-cooling/
%0 Journal Article
%R 
%& 84
%P 13
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 44
%N 3-4
%@ 0039-2480
%8 2017-11-11
%7 2017-11-11
Cerkvenik, Boštjan, & Alojz  Poredoš.
"Heat Compressor for Adsorption Cooling." Strojniški vestnik - Journal of Mechanical Engineering [Online], 44.3-4 (1998): 84-96. Web.  30 May. 2020
TY  - JOUR
AU  - Cerkvenik, Boštjan 
AU  - Poredoš, Alojz 
PY  - 1998
TI  - Heat Compressor for Adsorption Cooling
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - heat compressor; adsorption cooling; heat transfer; mathematical model; 
N2  - In adsorption cooling processes, the engineer faces the problem of inefficient heat and mass transfer in the heat compressor. This results in small specific cooling power of the device, which determines its size or the amount of adsorbent necessary for an undisturbed cooling process. With new designs of heat exchangers in heat compressors, heat and mass transfer can be considerably more efficient. One possible design is a heat compressor with a compact layer of adsorbent. The paper presents a mathematical model of heat and mass transfer into a compact homogeneous layer located on the heat exchanger tube in the compressor of an adsorption cooling device. The operation of the cooling device is described and the results of simulation for a case concerning several parallel tubes in a heat compressor are analysed. The values of the coefficient of performance are analysed with regard to the number of tubes and layer thickness. It was established that the intensity of the process which takes place in the heat processor is influenced to a considerable extent by the type of material from which the compact layer is made, and less by the layer ’s structure.
UR  - https://www.sv-jme.eu/article/heat-compressor-for-adsorption-cooling/
@article{{}{.},
	author = {Cerkvenik, B., Poredoš, A.},
	title = {Heat Compressor for Adsorption Cooling},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {44},
	number = {3-4},
	year = {1998},
	doi = {},
	url = {https://www.sv-jme.eu/article/heat-compressor-for-adsorption-cooling/}
}
TY  - JOUR
AU  - Cerkvenik, Boštjan 
AU  - Poredoš, Alojz 
PY  - 2017/11/11
TI  - Heat Compressor for Adsorption Cooling
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 44, No 3-4 (1998): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - heat compressor, adsorption cooling, heat transfer, mathematical model, 
N2  - In adsorption cooling processes, the engineer faces the problem of inefficient heat and mass transfer in the heat compressor. This results in small specific cooling power of the device, which determines its size or the amount of adsorbent necessary for an undisturbed cooling process. With new designs of heat exchangers in heat compressors, heat and mass transfer can be considerably more efficient. One possible design is a heat compressor with a compact layer of adsorbent. The paper presents a mathematical model of heat and mass transfer into a compact homogeneous layer located on the heat exchanger tube in the compressor of an adsorption cooling device. The operation of the cooling device is described and the results of simulation for a case concerning several parallel tubes in a heat compressor are analysed. The values of the coefficient of performance are analysed with regard to the number of tubes and layer thickness. It was established that the intensity of the process which takes place in the heat processor is influenced to a considerable extent by the type of material from which the compact layer is made, and less by the layer ’s structure.
UR  - https://www.sv-jme.eu/article/heat-compressor-for-adsorption-cooling/
Cerkvenik, Boštjan, AND Poredoš, Alojz.
"Heat Compressor for Adsorption Cooling" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 44 Number 3-4 (11 November 2017)

Authors

Affiliations

  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia
  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 44(1998)3-4, 84-96

In adsorption cooling processes, the engineer faces the problem of inefficient heat and mass transfer in the heat compressor. This results in small specific cooling power of the device, which determines its size or the amount of adsorbent necessary for an undisturbed cooling process. With new designs of heat exchangers in heat compressors, heat and mass transfer can be considerably more efficient. One possible design is a heat compressor with a compact layer of adsorbent. The paper presents a mathematical model of heat and mass transfer into a compact homogeneous layer located on the heat exchanger tube in the compressor of an adsorption cooling device. The operation of the cooling device is described and the results of simulation for a case concerning several parallel tubes in a heat compressor are analysed. The values of the coefficient of performance are analysed with regard to the number of tubes and layer thickness. It was established that the intensity of the process which takes place in the heat processor is influenced to a considerable extent by the type of material from which the compact layer is made, and less by the layer ’s structure.

heat compressor; adsorption cooling; heat transfer; mathematical model;