Heat transfer distribution for a free/porous system with forced convection and heat generation – a numerical study

1807 Views
1235 Downloads
Export citation: ABNT
SOUSA, Antonio C. M..
Heat transfer distribution for a free/porous system with forced convection and heat generation – a numerical study. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 51, n.7-8, p. 519-526, august 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/heat-transfer-distribution-for-a-freeporous-system-with-forced-convection-and-heat-generation-a-numerical-study/>. Date accessed: 09 dec. 2024. 
doi:http://dx.doi.org/.
Sousa, A.
(2005).
Heat transfer distribution for a free/porous system with forced convection and heat generation – a numerical study.
Strojniški vestnik - Journal of Mechanical Engineering, 51(7-8), 519-526.
doi:http://dx.doi.org/
@article{.,
	author = {Antonio C. M. Sousa},
	title = {Heat transfer distribution for a free/porous system with forced convection and heat generation – a numerical study},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {51},
	number = {7-8},
	year = {2005},
	keywords = {Heat transfer; porous system; heat generation; },
	abstract = {This paper reports on a numerical study for steady flow and heat transfer distribution for a configuration relevant to Liquid Composite Molding, where a gap between a porous substrate and the solid boundary of a mold cavity yields an edge flow. The flow within the porous domain is modeled by the Brinkman-Forchheimer formulation, and the edge flow itself is described by the NavierStokes equations. The cure of the fluid (resin) is simulated as a volumetric heat generation. The predictions are obtained using a welltested control-volume finite element method, however, a novel methodology had to be devised to define the interface between the free and porous system. The most relevant finding is the critical role of the gap upon the quality of the part. The presence of the gap can reduce substantially the average flow through the porous substrate, therefore yielding high temperature levels in this region. These temperatures may be sufficiently high to cause serious defects to the part being molded.},
	issn = {0039-2480},	pages = {519-526},	doi = {},
	url = {https://www.sv-jme.eu/article/heat-transfer-distribution-for-a-freeporous-system-with-forced-convection-and-heat-generation-a-numerical-study/}
}
Sousa, A.
2005 August 51. Heat transfer distribution for a free/porous system with forced convection and heat generation – a numerical study. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 51:7-8
%A Sousa, Antonio C. M.
%D 2005
%T Heat transfer distribution for a free/porous system with forced convection and heat generation – a numerical study
%B 2005
%9 Heat transfer; porous system; heat generation; 
%! Heat transfer distribution for a free/porous system with forced convection and heat generation – a numerical study
%K Heat transfer; porous system; heat generation; 
%X This paper reports on a numerical study for steady flow and heat transfer distribution for a configuration relevant to Liquid Composite Molding, where a gap between a porous substrate and the solid boundary of a mold cavity yields an edge flow. The flow within the porous domain is modeled by the Brinkman-Forchheimer formulation, and the edge flow itself is described by the NavierStokes equations. The cure of the fluid (resin) is simulated as a volumetric heat generation. The predictions are obtained using a welltested control-volume finite element method, however, a novel methodology had to be devised to define the interface between the free and porous system. The most relevant finding is the critical role of the gap upon the quality of the part. The presence of the gap can reduce substantially the average flow through the porous substrate, therefore yielding high temperature levels in this region. These temperatures may be sufficiently high to cause serious defects to the part being molded.
%U https://www.sv-jme.eu/article/heat-transfer-distribution-for-a-freeporous-system-with-forced-convection-and-heat-generation-a-numerical-study/
%0 Journal Article
%R 
%& 519
%P 8
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 51
%N 7-8
%@ 0039-2480
%8 2017-08-18
%7 2017-08-18
Sousa, Antonio.
"Heat transfer distribution for a free/porous system with forced convection and heat generation – a numerical study." Strojniški vestnik - Journal of Mechanical Engineering [Online], 51.7-8 (2005): 519-526. Web.  09 Dec. 2024
TY  - JOUR
AU  - Sousa, Antonio C. M.
PY  - 2005
TI  - Heat transfer distribution for a free/porous system with forced convection and heat generation – a numerical study
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - Heat transfer; porous system; heat generation; 
N2  - This paper reports on a numerical study for steady flow and heat transfer distribution for a configuration relevant to Liquid Composite Molding, where a gap between a porous substrate and the solid boundary of a mold cavity yields an edge flow. The flow within the porous domain is modeled by the Brinkman-Forchheimer formulation, and the edge flow itself is described by the NavierStokes equations. The cure of the fluid (resin) is simulated as a volumetric heat generation. The predictions are obtained using a welltested control-volume finite element method, however, a novel methodology had to be devised to define the interface between the free and porous system. The most relevant finding is the critical role of the gap upon the quality of the part. The presence of the gap can reduce substantially the average flow through the porous substrate, therefore yielding high temperature levels in this region. These temperatures may be sufficiently high to cause serious defects to the part being molded.
UR  - https://www.sv-jme.eu/article/heat-transfer-distribution-for-a-freeporous-system-with-forced-convection-and-heat-generation-a-numerical-study/
@article{{}{.},
	author = {Sousa, A.},
	title = {Heat transfer distribution for a free/porous system with forced convection and heat generation – a numerical study},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {51},
	number = {7-8},
	year = {2005},
	doi = {},
	url = {https://www.sv-jme.eu/article/heat-transfer-distribution-for-a-freeporous-system-with-forced-convection-and-heat-generation-a-numerical-study/}
}
TY  - JOUR
AU  - Sousa, Antonio C. M.
PY  - 2017/08/18
TI  - Heat transfer distribution for a free/porous system with forced convection and heat generation – a numerical study
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 51, No 7-8 (2005): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - Heat transfer, porous system, heat generation, 
N2  - This paper reports on a numerical study for steady flow and heat transfer distribution for a configuration relevant to Liquid Composite Molding, where a gap between a porous substrate and the solid boundary of a mold cavity yields an edge flow. The flow within the porous domain is modeled by the Brinkman-Forchheimer formulation, and the edge flow itself is described by the NavierStokes equations. The cure of the fluid (resin) is simulated as a volumetric heat generation. The predictions are obtained using a welltested control-volume finite element method, however, a novel methodology had to be devised to define the interface between the free and porous system. The most relevant finding is the critical role of the gap upon the quality of the part. The presence of the gap can reduce substantially the average flow through the porous substrate, therefore yielding high temperature levels in this region. These temperatures may be sufficiently high to cause serious defects to the part being molded.
UR  - https://www.sv-jme.eu/article/heat-transfer-distribution-for-a-freeporous-system-with-forced-convection-and-heat-generation-a-numerical-study/
Sousa, Antonio"Heat transfer distribution for a free/porous system with forced convection and heat generation – a numerical study" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 51 Number 7-8 (18 August 2017)

Authors

Affiliations

  • Universidade de Aveiro, Portugal.

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 51(2005)7-8, 519-526
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

This paper reports on a numerical study for steady flow and heat transfer distribution for a configuration relevant to Liquid Composite Molding, where a gap between a porous substrate and the solid boundary of a mold cavity yields an edge flow. The flow within the porous domain is modeled by the Brinkman-Forchheimer formulation, and the edge flow itself is described by the NavierStokes equations. The cure of the fluid (resin) is simulated as a volumetric heat generation. The predictions are obtained using a welltested control-volume finite element method, however, a novel methodology had to be devised to define the interface between the free and porous system. The most relevant finding is the critical role of the gap upon the quality of the part. The presence of the gap can reduce substantially the average flow through the porous substrate, therefore yielding high temperature levels in this region. These temperatures may be sufficiently high to cause serious defects to the part being molded.

Heat transfer; porous system; heat generation;