High Pressure Cooling in the Machining of Hard-to-Machine Materials

1272 Views
1973 Downloads
Export citation: ABNT
KRAMAR, Davorin ;KOPAČ, Janez .
High Pressure Cooling in the Machining of Hard-to-Machine Materials. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 55, n.11, p. 685-694, august 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/high-pressure-cooling-in-the-machining-of-hard-to-machine-materials/>. Date accessed: 25 jun. 2022. 
doi:http://dx.doi.org/.
Kramar, D., & Kopač, J.
(2009).
High Pressure Cooling in the Machining of Hard-to-Machine Materials.
Strojniški vestnik - Journal of Mechanical Engineering, 55(11), 685-694.
doi:http://dx.doi.org/
@article{.,
	author = {Davorin  Kramar and Janez  Kopač},
	title = {High Pressure Cooling in the Machining of Hard-to-Machine Materials},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {55},
	number = {11},
	year = {2009},
	keywords = {high pressure cooling; machinability; technological windows; tool wear; },
	abstract = {This paper investigates the application of high-pressure cooling (HPC) assistance in the rough turning of two different hard-to-machine materials, namely hard-chromed and surface hardened C45E and Inconel 718 with coated carbide tools. The region of operability – technology windows, which sets the boundaries of the process parameters, has been experimentally determined using the tool–material pair (TMP) methodology. The capabilities of different hard turning procedures are compared by means of chip breakability, cooling efficiency, temperatures in cutting zone, tool wear and cutting forces. All machining experiments were performed under conventional cutting speeds.},
	issn = {0039-2480},	pages = {685-694},	doi = {},
	url = {https://www.sv-jme.eu/article/high-pressure-cooling-in-the-machining-of-hard-to-machine-materials/}
}
Kramar, D.,Kopač, J.
2009 August 55. High Pressure Cooling in the Machining of Hard-to-Machine Materials. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 55:11
%A Kramar, Davorin 
%A Kopač, Janez 
%D 2009
%T High Pressure Cooling in the Machining of Hard-to-Machine Materials
%B 2009
%9 high pressure cooling; machinability; technological windows; tool wear; 
%! High Pressure Cooling in the Machining of Hard-to-Machine Materials
%K high pressure cooling; machinability; technological windows; tool wear; 
%X This paper investigates the application of high-pressure cooling (HPC) assistance in the rough turning of two different hard-to-machine materials, namely hard-chromed and surface hardened C45E and Inconel 718 with coated carbide tools. The region of operability – technology windows, which sets the boundaries of the process parameters, has been experimentally determined using the tool–material pair (TMP) methodology. The capabilities of different hard turning procedures are compared by means of chip breakability, cooling efficiency, temperatures in cutting zone, tool wear and cutting forces. All machining experiments were performed under conventional cutting speeds.
%U https://www.sv-jme.eu/article/high-pressure-cooling-in-the-machining-of-hard-to-machine-materials/
%0 Journal Article
%R 
%& 685
%P 10
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 55
%N 11
%@ 0039-2480
%8 2017-08-21
%7 2017-08-21
Kramar, Davorin, & Janez  Kopač.
"High Pressure Cooling in the Machining of Hard-to-Machine Materials." Strojniški vestnik - Journal of Mechanical Engineering [Online], 55.11 (2009): 685-694. Web.  25 Jun. 2022
TY  - JOUR
AU  - Kramar, Davorin 
AU  - Kopač, Janez 
PY  - 2009
TI  - High Pressure Cooling in the Machining of Hard-to-Machine Materials
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - high pressure cooling; machinability; technological windows; tool wear; 
N2  - This paper investigates the application of high-pressure cooling (HPC) assistance in the rough turning of two different hard-to-machine materials, namely hard-chromed and surface hardened C45E and Inconel 718 with coated carbide tools. The region of operability – technology windows, which sets the boundaries of the process parameters, has been experimentally determined using the tool–material pair (TMP) methodology. The capabilities of different hard turning procedures are compared by means of chip breakability, cooling efficiency, temperatures in cutting zone, tool wear and cutting forces. All machining experiments were performed under conventional cutting speeds.
UR  - https://www.sv-jme.eu/article/high-pressure-cooling-in-the-machining-of-hard-to-machine-materials/
@article{{}{.},
	author = {Kramar, D., Kopač, J.},
	title = {High Pressure Cooling in the Machining of Hard-to-Machine Materials},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {55},
	number = {11},
	year = {2009},
	doi = {},
	url = {https://www.sv-jme.eu/article/high-pressure-cooling-in-the-machining-of-hard-to-machine-materials/}
}
TY  - JOUR
AU  - Kramar, Davorin 
AU  - Kopač, Janez 
PY  - 2017/08/21
TI  - High Pressure Cooling in the Machining of Hard-to-Machine Materials
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 55, No 11 (2009): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - high pressure cooling, machinability, technological windows, tool wear, 
N2  - This paper investigates the application of high-pressure cooling (HPC) assistance in the rough turning of two different hard-to-machine materials, namely hard-chromed and surface hardened C45E and Inconel 718 with coated carbide tools. The region of operability – technology windows, which sets the boundaries of the process parameters, has been experimentally determined using the tool–material pair (TMP) methodology. The capabilities of different hard turning procedures are compared by means of chip breakability, cooling efficiency, temperatures in cutting zone, tool wear and cutting forces. All machining experiments were performed under conventional cutting speeds.
UR  - https://www.sv-jme.eu/article/high-pressure-cooling-in-the-machining-of-hard-to-machine-materials/
Kramar, Davorin, AND Kopač, Janez.
"High Pressure Cooling in the Machining of Hard-to-Machine Materials" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 55 Number 11 (21 August 2017)

Authors

Affiliations

  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia
  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 55(2009)11, 685-694
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

This paper investigates the application of high-pressure cooling (HPC) assistance in the rough turning of two different hard-to-machine materials, namely hard-chromed and surface hardened C45E and Inconel 718 with coated carbide tools. The region of operability – technology windows, which sets the boundaries of the process parameters, has been experimentally determined using the tool–material pair (TMP) methodology. The capabilities of different hard turning procedures are compared by means of chip breakability, cooling efficiency, temperatures in cutting zone, tool wear and cutting forces. All machining experiments were performed under conventional cutting speeds.

high pressure cooling; machinability; technological windows; tool wear;