Hot Incremental Forming of Biocomposites Developed from Linen Fibres and a Thermoplastic Matrix

2053 Views
1273 Downloads
Export citation: ABNT
TORRES, Sandino ;ORTEGA, Roberto ;ACOSTA, Pablo ;CALDERÓN, Edisson .
Hot Incremental Forming of Biocomposites Developed from Linen Fibres and a Thermoplastic Matrix. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 67, n.3, p. 123-132, april 2021. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/hot-incremental-forming-of-biocomposites-developed-from-flax-fibre-and-a-thermoplastic-matrix/>. Date accessed: 11 dec. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2020.6936.
Torres, S., Ortega, R., Acosta, P., & Calderón, E.
(2021).
Hot Incremental Forming of Biocomposites Developed from Linen Fibres and a Thermoplastic Matrix.
Strojniški vestnik - Journal of Mechanical Engineering, 67(3), 123-132.
doi:http://dx.doi.org/10.5545/sv-jme.2020.6936
@article{sv-jmesv-jme.2020.6936,
	author = {Sandino  Torres and Roberto  Ortega and Pablo  Acosta and Edisson  Calderón},
	title = {Hot Incremental Forming of Biocomposites Developed from Linen Fibres and a Thermoplastic Matrix},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {67},
	number = {3},
	year = {2021},
	keywords = {incremental forming, bio-composites, hot formability, analysis of variance, deformation},
	abstract = {The use of biodegradable materials has a growing field of application due to environmental concerns, however, scientific research on incremental forming using biomaterials is scarce. Thus, this study focuses on the single point incremental forming (SPIF) process applied to a composite sheet that combines a biodegradable thermoplastic matrix (Solanyl) reinforced with natural fibres (flax). The influence of the process parameters on the final geometry is determined, evaluating the effect of the following factors: step depth, wall angle and temperature reached during the process. Additionally, a heated aqueous medium is incorporated which facilitates the formability of the composite sheets. This method is especially useful for materials that have poor formability at room temperature. The benefits of using controlled heat include the reduction of formation forces applied to the plate, improved accuracy due to the reduction of elastic recovery, and the manipulation of the samples remarkably close to the glass transition temperatures. Through this experimental study with the variables analysed, a maximum shaping depth of 310 mm is obtained. These results confirm that the single point shaping used with bioplastic materials is possible and has positive outcomes for incremental forming.},
	issn = {0039-2480},	pages = {123-132},	doi = {10.5545/sv-jme.2020.6936},
	url = {https://www.sv-jme.eu/article/hot-incremental-forming-of-biocomposites-developed-from-flax-fibre-and-a-thermoplastic-matrix/}
}
Torres, S.,Ortega, R.,Acosta, P.,Calderón, E.
2021 April 67. Hot Incremental Forming of Biocomposites Developed from Linen Fibres and a Thermoplastic Matrix. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 67:3
%A Torres, Sandino 
%A Ortega, Roberto 
%A Acosta, Pablo 
%A Calderón, Edisson 
%D 2021
%T Hot Incremental Forming of Biocomposites Developed from Linen Fibres and a Thermoplastic Matrix
%B 2021
%9 incremental forming, bio-composites, hot formability, analysis of variance, deformation
%! Hot Incremental Forming of Biocomposites Developed from Linen Fibres and a Thermoplastic Matrix
%K incremental forming, bio-composites, hot formability, analysis of variance, deformation
%X The use of biodegradable materials has a growing field of application due to environmental concerns, however, scientific research on incremental forming using biomaterials is scarce. Thus, this study focuses on the single point incremental forming (SPIF) process applied to a composite sheet that combines a biodegradable thermoplastic matrix (Solanyl) reinforced with natural fibres (flax). The influence of the process parameters on the final geometry is determined, evaluating the effect of the following factors: step depth, wall angle and temperature reached during the process. Additionally, a heated aqueous medium is incorporated which facilitates the formability of the composite sheets. This method is especially useful for materials that have poor formability at room temperature. The benefits of using controlled heat include the reduction of formation forces applied to the plate, improved accuracy due to the reduction of elastic recovery, and the manipulation of the samples remarkably close to the glass transition temperatures. Through this experimental study with the variables analysed, a maximum shaping depth of 310 mm is obtained. These results confirm that the single point shaping used with bioplastic materials is possible and has positive outcomes for incremental forming.
%U https://www.sv-jme.eu/article/hot-incremental-forming-of-biocomposites-developed-from-flax-fibre-and-a-thermoplastic-matrix/
%0 Journal Article
%R 10.5545/sv-jme.2020.6936
%& 123
%P 10
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 67
%N 3
%@ 0039-2480
%8 2021-04-14
%7 2021-04-14
Torres, Sandino, Roberto  Ortega, Pablo  Acosta, & Edisson  Calderón.
"Hot Incremental Forming of Biocomposites Developed from Linen Fibres and a Thermoplastic Matrix." Strojniški vestnik - Journal of Mechanical Engineering [Online], 67.3 (2021): 123-132. Web.  11 Dec. 2024
TY  - JOUR
AU  - Torres, Sandino 
AU  - Ortega, Roberto 
AU  - Acosta, Pablo 
AU  - Calderón, Edisson 
PY  - 2021
TI  - Hot Incremental Forming of Biocomposites Developed from Linen Fibres and a Thermoplastic Matrix
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2020.6936
KW  - incremental forming, bio-composites, hot formability, analysis of variance, deformation
N2  - The use of biodegradable materials has a growing field of application due to environmental concerns, however, scientific research on incremental forming using biomaterials is scarce. Thus, this study focuses on the single point incremental forming (SPIF) process applied to a composite sheet that combines a biodegradable thermoplastic matrix (Solanyl) reinforced with natural fibres (flax). The influence of the process parameters on the final geometry is determined, evaluating the effect of the following factors: step depth, wall angle and temperature reached during the process. Additionally, a heated aqueous medium is incorporated which facilitates the formability of the composite sheets. This method is especially useful for materials that have poor formability at room temperature. The benefits of using controlled heat include the reduction of formation forces applied to the plate, improved accuracy due to the reduction of elastic recovery, and the manipulation of the samples remarkably close to the glass transition temperatures. Through this experimental study with the variables analysed, a maximum shaping depth of 310 mm is obtained. These results confirm that the single point shaping used with bioplastic materials is possible and has positive outcomes for incremental forming.
UR  - https://www.sv-jme.eu/article/hot-incremental-forming-of-biocomposites-developed-from-flax-fibre-and-a-thermoplastic-matrix/
@article{{sv-jme}{sv-jme.2020.6936},
	author = {Torres, S., Ortega, R., Acosta, P., Calderón, E.},
	title = {Hot Incremental Forming of Biocomposites Developed from Linen Fibres and a Thermoplastic Matrix},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {67},
	number = {3},
	year = {2021},
	doi = {10.5545/sv-jme.2020.6936},
	url = {https://www.sv-jme.eu/article/hot-incremental-forming-of-biocomposites-developed-from-flax-fibre-and-a-thermoplastic-matrix/}
}
TY  - JOUR
AU  - Torres, Sandino 
AU  - Ortega, Roberto 
AU  - Acosta, Pablo 
AU  - Calderón, Edisson 
PY  - 2021/04/14
TI  - Hot Incremental Forming of Biocomposites Developed from Linen Fibres and a Thermoplastic Matrix
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 67, No 3 (2021): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2020.6936
KW  - incremental forming, bio-composites, hot formability, analysis of variance, deformation
N2  - The use of biodegradable materials has a growing field of application due to environmental concerns, however, scientific research on incremental forming using biomaterials is scarce. Thus, this study focuses on the single point incremental forming (SPIF) process applied to a composite sheet that combines a biodegradable thermoplastic matrix (Solanyl) reinforced with natural fibres (flax). The influence of the process parameters on the final geometry is determined, evaluating the effect of the following factors: step depth, wall angle and temperature reached during the process. Additionally, a heated aqueous medium is incorporated which facilitates the formability of the composite sheets. This method is especially useful for materials that have poor formability at room temperature. The benefits of using controlled heat include the reduction of formation forces applied to the plate, improved accuracy due to the reduction of elastic recovery, and the manipulation of the samples remarkably close to the glass transition temperatures. Through this experimental study with the variables analysed, a maximum shaping depth of 310 mm is obtained. These results confirm that the single point shaping used with bioplastic materials is possible and has positive outcomes for incremental forming.
UR  - https://www.sv-jme.eu/article/hot-incremental-forming-of-biocomposites-developed-from-flax-fibre-and-a-thermoplastic-matrix/
Torres, Sandino, Ortega, Roberto, Acosta, Pablo, AND Calderón, Edisson.
"Hot Incremental Forming of Biocomposites Developed from Linen Fibres and a Thermoplastic Matrix" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 67 Number 3 (14 April 2021)

Authors

Affiliations

  • Central Technic Higher Technological Institute (ISTCT), Industrial Mechanics & Electronics, Ecuador 1
  • Chimborazo Higher Polytechnic School (ESPOCH), Maintenance Research GROUP (GIMAN), Ecuador 2

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 67(2021)3, 123-132
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

https://doi.org/10.5545/sv-jme.2020.6936

The use of biodegradable materials has a growing field of application due to environmental concerns, however, scientific research on incremental forming using biomaterials is scarce. Thus, this study focuses on the single point incremental forming (SPIF) process applied to a composite sheet that combines a biodegradable thermoplastic matrix (Solanyl) reinforced with natural fibres (flax). The influence of the process parameters on the final geometry is determined, evaluating the effect of the following factors: step depth, wall angle and temperature reached during the process. Additionally, a heated aqueous medium is incorporated which facilitates the formability of the composite sheets. This method is especially useful for materials that have poor formability at room temperature. The benefits of using controlled heat include the reduction of formation forces applied to the plate, improved accuracy due to the reduction of elastic recovery, and the manipulation of the samples remarkably close to the glass transition temperatures. Through this experimental study with the variables analysed, a maximum shaping depth of 310 mm is obtained. These results confirm that the single point shaping used with bioplastic materials is possible and has positive outcomes for incremental forming.

incremental forming, bio-composites, hot formability, analysis of variance, deformation