Influence of Blade Deformation on Integral Characteristic of Axial Flow Fan

713 Views
505 Downloads
Export citation: ABNT
EBERLINC, Matjaž ;DULAR, Matevž ;ŠIROK, Brane ;LEPANJA, Bojan .
Influence of Blade Deformation on Integral Characteristic of Axial Flow Fan. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 54, n.3, p. 159-169, august 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/influence-of-blade-deformation-on-integral-characteristic-of-axial-flow-fan/>. Date accessed: 06 jun. 2020. 
doi:http://dx.doi.org/.
Eberlinc, M., Dular, M., Širok, B., & Lepanja, B.
(2008).
Influence of Blade Deformation on Integral Characteristic of Axial Flow Fan.
Strojniški vestnik - Journal of Mechanical Engineering, 54(3), 159-169.
doi:http://dx.doi.org/
@article{.,
	author = {Matjaž  Eberlinc and Matevž  Dular and Brane  Širok and Bojan  Lepanja},
	title = {Influence of Blade Deformation on Integral Characteristic of Axial Flow Fan},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {54},
	number = {3},
	year = {2008},
	keywords = {axial flow fan; blade deformation; visualization; },
	abstract = {Axial flow fan blades during operation due to the various forces that act on them. That is why, we can aks ourselves about the influence of the blade deformation on the integral and local characteristics. In the paper, we present a study of infulence of axial flow fan blade deformation. The paper deals with measurements of the blade deformation at the known integral working conditions. Results  -deforamtions of a fan blade tip were used for numerical study f the influence of the  changed balde formon the fan's aerodynamic characteristic. Fan integral characteristics were measured in accordance with the ISO-DIS 5801:2006 standard and were carried out on the wind tunnel of the Hidria Institute Klima, Godovič. Other measurements of the blade deformation weredone on the measuring station on the Faculty of Mechaical Engineering. University of Ljubljana, with the help of computer aided visualization. Deformations were measured in three working points, which were defined with fan integral parametrs. Results of the measurements helped to determine modified form of the blade, which was then used for the numerical simulation for the same fan integral parameters. The study of deformation infulence based on the numerical simulation, was carried out.},
	issn = {0039-2480},	pages = {159-169},	doi = {},
	url = {https://www.sv-jme.eu/article/influence-of-blade-deformation-on-integral-characteristic-of-axial-flow-fan/}
}
Eberlinc, M.,Dular, M.,Širok, B.,Lepanja, B.
2008 August 54. Influence of Blade Deformation on Integral Characteristic of Axial Flow Fan. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 54:3
%A Eberlinc, Matjaž 
%A Dular, Matevž 
%A Širok, Brane 
%A Lepanja, Bojan 
%D 2008
%T Influence of Blade Deformation on Integral Characteristic of Axial Flow Fan
%B 2008
%9 axial flow fan; blade deformation; visualization; 
%! Influence of Blade Deformation on Integral Characteristic of Axial Flow Fan
%K axial flow fan; blade deformation; visualization; 
%X Axial flow fan blades during operation due to the various forces that act on them. That is why, we can aks ourselves about the influence of the blade deformation on the integral and local characteristics. In the paper, we present a study of infulence of axial flow fan blade deformation. The paper deals with measurements of the blade deformation at the known integral working conditions. Results  -deforamtions of a fan blade tip were used for numerical study f the influence of the  changed balde formon the fan's aerodynamic characteristic. Fan integral characteristics were measured in accordance with the ISO-DIS 5801:2006 standard and were carried out on the wind tunnel of the Hidria Institute Klima, Godovič. Other measurements of the blade deformation weredone on the measuring station on the Faculty of Mechaical Engineering. University of Ljubljana, with the help of computer aided visualization. Deformations were measured in three working points, which were defined with fan integral parametrs. Results of the measurements helped to determine modified form of the blade, which was then used for the numerical simulation for the same fan integral parameters. The study of deformation infulence based on the numerical simulation, was carried out.
%U https://www.sv-jme.eu/article/influence-of-blade-deformation-on-integral-characteristic-of-axial-flow-fan/
%0 Journal Article
%R 
%& 159
%P 11
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 54
%N 3
%@ 0039-2480
%8 2017-08-21
%7 2017-08-21
Eberlinc, Matjaž, Matevž  Dular, Brane  Širok, & Bojan  Lepanja.
"Influence of Blade Deformation on Integral Characteristic of Axial Flow Fan." Strojniški vestnik - Journal of Mechanical Engineering [Online], 54.3 (2008): 159-169. Web.  06 Jun. 2020
TY  - JOUR
AU  - Eberlinc, Matjaž 
AU  - Dular, Matevž 
AU  - Širok, Brane 
AU  - Lepanja, Bojan 
PY  - 2008
TI  - Influence of Blade Deformation on Integral Characteristic of Axial Flow Fan
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - axial flow fan; blade deformation; visualization; 
N2  - Axial flow fan blades during operation due to the various forces that act on them. That is why, we can aks ourselves about the influence of the blade deformation on the integral and local characteristics. In the paper, we present a study of infulence of axial flow fan blade deformation. The paper deals with measurements of the blade deformation at the known integral working conditions. Results  -deforamtions of a fan blade tip were used for numerical study f the influence of the  changed balde formon the fan's aerodynamic characteristic. Fan integral characteristics were measured in accordance with the ISO-DIS 5801:2006 standard and were carried out on the wind tunnel of the Hidria Institute Klima, Godovič. Other measurements of the blade deformation weredone on the measuring station on the Faculty of Mechaical Engineering. University of Ljubljana, with the help of computer aided visualization. Deformations were measured in three working points, which were defined with fan integral parametrs. Results of the measurements helped to determine modified form of the blade, which was then used for the numerical simulation for the same fan integral parameters. The study of deformation infulence based on the numerical simulation, was carried out.
UR  - https://www.sv-jme.eu/article/influence-of-blade-deformation-on-integral-characteristic-of-axial-flow-fan/
@article{{}{.},
	author = {Eberlinc, M., Dular, M., Širok, B., Lepanja, B.},
	title = {Influence of Blade Deformation on Integral Characteristic of Axial Flow Fan},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {54},
	number = {3},
	year = {2008},
	doi = {},
	url = {https://www.sv-jme.eu/article/influence-of-blade-deformation-on-integral-characteristic-of-axial-flow-fan/}
}
TY  - JOUR
AU  - Eberlinc, Matjaž 
AU  - Dular, Matevž 
AU  - Širok, Brane 
AU  - Lepanja, Bojan 
PY  - 2017/08/21
TI  - Influence of Blade Deformation on Integral Characteristic of Axial Flow Fan
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 54, No 3 (2008): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - axial flow fan, blade deformation, visualization, 
N2  - Axial flow fan blades during operation due to the various forces that act on them. That is why, we can aks ourselves about the influence of the blade deformation on the integral and local characteristics. In the paper, we present a study of infulence of axial flow fan blade deformation. The paper deals with measurements of the blade deformation at the known integral working conditions. Results  -deforamtions of a fan blade tip were used for numerical study f the influence of the  changed balde formon the fan's aerodynamic characteristic. Fan integral characteristics were measured in accordance with the ISO-DIS 5801:2006 standard and were carried out on the wind tunnel of the Hidria Institute Klima, Godovič. Other measurements of the blade deformation weredone on the measuring station on the Faculty of Mechaical Engineering. University of Ljubljana, with the help of computer aided visualization. Deformations were measured in three working points, which were defined with fan integral parametrs. Results of the measurements helped to determine modified form of the blade, which was then used for the numerical simulation for the same fan integral parameters. The study of deformation infulence based on the numerical simulation, was carried out.
UR  - https://www.sv-jme.eu/article/influence-of-blade-deformation-on-integral-characteristic-of-axial-flow-fan/
Eberlinc, Matjaž, Dular, Matevž, Širok, Brane, AND Lepanja, Bojan.
"Influence of Blade Deformation on Integral Characteristic of Axial Flow Fan" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 54 Number 3 (21 August 2017)

Authors

Affiliations

  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia
  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia
  • University of Ljubljana, Faculty of Mechanical Engineering, Slovenia
  • Hidria Institute Klima, Godovič, Slovenia

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 54(2008)3, 159-169

Axial flow fan blades during operation due to the various forces that act on them. That is why, we can aks ourselves about the influence of the blade deformation on the integral and local characteristics. In the paper, we present a study of infulence of axial flow fan blade deformation. The paper deals with measurements of the blade deformation at the known integral working conditions. Results  -deforamtions of a fan blade tip were used for numerical study f the influence of the  changed balde formon the fan's aerodynamic characteristic. Fan integral characteristics were measured in accordance with the ISO-DIS 5801:2006 standard and were carried out on the wind tunnel of the Hidria Institute Klima, Godovič. Other measurements of the blade deformation weredone on the measuring station on the Faculty of Mechaical Engineering. University of Ljubljana, with the help of computer aided visualization. Deformations were measured in three working points, which were defined with fan integral parametrs. Results of the measurements helped to determine modified form of the blade, which was then used for the numerical simulation for the same fan integral parameters. The study of deformation infulence based on the numerical simulation, was carried out.

axial flow fan; blade deformation; visualization;