Integration of Information for Manufacturing Shop Control

1983 Views
2500 Downloads
Export citation: ABNT
TEŠIĆ, Zdravko ;MITROVIĆ, Vojin ;ĆOSIĆ, Ilija ;LALIĆ, Danijela .
Integration of Information for Manufacturing Shop Control. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 56, n.3, p. 217-223, october 2017. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/integration-of-information-for-manufacturing-shop-control/>. Date accessed: 04 oct. 2024. 
doi:http://dx.doi.org/.
Tešić, Z., Mitrović, V., Ćosić, I., & Lalić, D.
(2010).
Integration of Information for Manufacturing Shop Control.
Strojniški vestnik - Journal of Mechanical Engineering, 56(3), 217-223.
doi:http://dx.doi.org/
@article{.,
	author = {Zdravko  Tešić and Vojin  Mitrović and Ilija  Ćosić and Danijela  Lalić},
	title = {Integration of Information for Manufacturing Shop Control},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {56},
	number = {3},
	year = {2010},
	keywords = {enterprise integration; planning; scheduling; shop-floor control; },
	abstract = {The concept of manufacturing execution system (MES) has acquired a huge importance in modern manufacturing enterprises, especially in low volume and high variety manufacturing industries. The integration between enterprise resources planning (ERP), manufacturing execution systems and shopfloor control (SFC) systems can take a major role in an enterprise control system. Manufacturing execution system is located in the middle, where an enterprise resource planning is located above and shop floor control system is located below. In this paper is presented the part of the automated shop floor control system with possibilities of connecting to the control system on the machine level. Also, possibilities and limitations in communication between existing automatic machine control systems as well as other devices into integral information system of manufacturing enterprise are described.},
	issn = {0039-2480},	pages = {217-223},	doi = {},
	url = {https://www.sv-jme.eu/article/integration-of-information-for-manufacturing-shop-control/}
}
Tešić, Z.,Mitrović, V.,Ćosić, I.,Lalić, D.
2010 October 56. Integration of Information for Manufacturing Shop Control. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 56:3
%A Tešić, Zdravko 
%A Mitrović, Vojin 
%A Ćosić, Ilija 
%A Lalić, Danijela 
%D 2010
%T Integration of Information for Manufacturing Shop Control
%B 2010
%9 enterprise integration; planning; scheduling; shop-floor control; 
%! Integration of Information for Manufacturing Shop Control
%K enterprise integration; planning; scheduling; shop-floor control; 
%X The concept of manufacturing execution system (MES) has acquired a huge importance in modern manufacturing enterprises, especially in low volume and high variety manufacturing industries. The integration between enterprise resources planning (ERP), manufacturing execution systems and shopfloor control (SFC) systems can take a major role in an enterprise control system. Manufacturing execution system is located in the middle, where an enterprise resource planning is located above and shop floor control system is located below. In this paper is presented the part of the automated shop floor control system with possibilities of connecting to the control system on the machine level. Also, possibilities and limitations in communication between existing automatic machine control systems as well as other devices into integral information system of manufacturing enterprise are described.
%U https://www.sv-jme.eu/article/integration-of-information-for-manufacturing-shop-control/
%0 Journal Article
%R 
%& 217
%P 7
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 56
%N 3
%@ 0039-2480
%8 2017-10-24
%7 2017-10-24
Tešić, Zdravko, Vojin  Mitrović, Ilija  Ćosić, & Danijela  Lalić.
"Integration of Information for Manufacturing Shop Control." Strojniški vestnik - Journal of Mechanical Engineering [Online], 56.3 (2010): 217-223. Web.  04 Oct. 2024
TY  - JOUR
AU  - Tešić, Zdravko 
AU  - Mitrović, Vojin 
AU  - Ćosić, Ilija 
AU  - Lalić, Danijela 
PY  - 2010
TI  - Integration of Information for Manufacturing Shop Control
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - enterprise integration; planning; scheduling; shop-floor control; 
N2  - The concept of manufacturing execution system (MES) has acquired a huge importance in modern manufacturing enterprises, especially in low volume and high variety manufacturing industries. The integration between enterprise resources planning (ERP), manufacturing execution systems and shopfloor control (SFC) systems can take a major role in an enterprise control system. Manufacturing execution system is located in the middle, where an enterprise resource planning is located above and shop floor control system is located below. In this paper is presented the part of the automated shop floor control system with possibilities of connecting to the control system on the machine level. Also, possibilities and limitations in communication between existing automatic machine control systems as well as other devices into integral information system of manufacturing enterprise are described.
UR  - https://www.sv-jme.eu/article/integration-of-information-for-manufacturing-shop-control/
@article{{}{.},
	author = {Tešić, Z., Mitrović, V., Ćosić, I., Lalić, D.},
	title = {Integration of Information for Manufacturing Shop Control},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {56},
	number = {3},
	year = {2010},
	doi = {},
	url = {https://www.sv-jme.eu/article/integration-of-information-for-manufacturing-shop-control/}
}
TY  - JOUR
AU  - Tešić, Zdravko 
AU  - Mitrović, Vojin 
AU  - Ćosić, Ilija 
AU  - Lalić, Danijela 
PY  - 2017/10/24
TI  - Integration of Information for Manufacturing Shop Control
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 56, No 3 (2010): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 
KW  - enterprise integration, planning, scheduling, shop-floor control, 
N2  - The concept of manufacturing execution system (MES) has acquired a huge importance in modern manufacturing enterprises, especially in low volume and high variety manufacturing industries. The integration between enterprise resources planning (ERP), manufacturing execution systems and shopfloor control (SFC) systems can take a major role in an enterprise control system. Manufacturing execution system is located in the middle, where an enterprise resource planning is located above and shop floor control system is located below. In this paper is presented the part of the automated shop floor control system with possibilities of connecting to the control system on the machine level. Also, possibilities and limitations in communication between existing automatic machine control systems as well as other devices into integral information system of manufacturing enterprise are described.
UR  - https://www.sv-jme.eu/article/integration-of-information-for-manufacturing-shop-control/
Tešić, Zdravko, Mitrović, Vojin, Ćosić, Ilija, AND Lalić, Danijela.
"Integration of Information for Manufacturing Shop Control" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 56 Number 3 (24 October 2017)

Authors

Affiliations

  • University of Novi Sad, Faculty of Technical Sciences, Department of Industrial Engineering and Management, Novi Sad, Serbia
  • University of Novi Sad, Faculty of Technical Sciences, Department of Industrial Engineering and Management, Novi Sad, Serbia
  • University of Novi Sad, Faculty of Technical Sciences, Department of Industrial Engineering and Management, Novi Sad, Serbia
  • University of Novi Sad, Faculty of Technical Sciences, Department of Industrial Engineering and Management, Novi Sad, Serbia

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 56(2010)3, 217-223
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

The concept of manufacturing execution system (MES) has acquired a huge importance in modern manufacturing enterprises, especially in low volume and high variety manufacturing industries. The integration between enterprise resources planning (ERP), manufacturing execution systems and shopfloor control (SFC) systems can take a major role in an enterprise control system. Manufacturing execution system is located in the middle, where an enterprise resource planning is located above and shop floor control system is located below. In this paper is presented the part of the automated shop floor control system with possibilities of connecting to the control system on the machine level. Also, possibilities and limitations in communication between existing automatic machine control systems as well as other devices into integral information system of manufacturing enterprise are described.

enterprise integration; planning; scheduling; shop-floor control;