MANIKANDAN RAJAM, Pratheesh Kumar ;NAMPOOTHIRI, Jayakrishnan . Investigation of Laser Ablative Micromachining of Al/TiB2 Nanocomposite. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 68, n.12, p. 735-745, november 2022. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/investigation-on-laser-ablative-micromachining-of-altib2-nanocomposite/>. Date accessed: 19 apr. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2022.306.
Manikandan Rajam, P., & Nampoothiri, J. (2022). Investigation of Laser Ablative Micromachining of Al/TiB2 Nanocomposite. Strojniški vestnik - Journal of Mechanical Engineering, 68(12), 735-745. doi:http://dx.doi.org/10.5545/sv-jme.2022.306
@article{sv-jmesv-jme.2022.306,
author = {Pratheesh Kumar Manikandan Rajam and Jayakrishnan Nampoothiri},
title = {Investigation of Laser Ablative Micromachining of Al/TiB2 Nanocomposite},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {68},
number = {12},
year = {2022},
keywords = {Laser micromachining; surface roughness; nanocomposite; parameter optimization; Taguchi methodology; Nd: YAG Laser; },
abstract = {Laser beam machining (LBM) is used to machine a variety of materials economically and to obtain the required quality metrics. The quality of the surface finish of laser-machined components is affected by the improper selection of process parameters during machining. In this paper, microchannels were machined on Al/TiB2 nanocomposite using an Nd: YAG laser system. An atomic force microscope was used to obtain the surface roughness of microchannels. The aim of this process is to identify the influence of the individual and interactive effect of the process parameters on the surface roughness of the microchannels and to identify the optimum combination of the process parameters for minimum surface roughness. Taguchi’s L9 orthogonal array-based Design of Experiment (DoE) was implemented to conduct the experimental study. A statistical analysis of the results was performed for the experimental data. The results are presented in detail.},
issn = {0039-2480}, pages = {735-745}, doi = {10.5545/sv-jme.2022.306},
url = {https://www.sv-jme.eu/article/investigation-on-laser-ablative-micromachining-of-altib2-nanocomposite/}
}
Manikandan Rajam, P.,Nampoothiri, J. 2022 November 68. Investigation of Laser Ablative Micromachining of Al/TiB2 Nanocomposite. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 68:12
%A Manikandan Rajam, Pratheesh Kumar %A Nampoothiri, Jayakrishnan %D 2022 %T Investigation of Laser Ablative Micromachining of Al/TiB2 Nanocomposite %B 2022 %9 Laser micromachining; surface roughness; nanocomposite; parameter optimization; Taguchi methodology; Nd: YAG Laser; %! Investigation of Laser Ablative Micromachining of Al/TiB2 Nanocomposite %K Laser micromachining; surface roughness; nanocomposite; parameter optimization; Taguchi methodology; Nd: YAG Laser; %X Laser beam machining (LBM) is used to machine a variety of materials economically and to obtain the required quality metrics. The quality of the surface finish of laser-machined components is affected by the improper selection of process parameters during machining. In this paper, microchannels were machined on Al/TiB2 nanocomposite using an Nd: YAG laser system. An atomic force microscope was used to obtain the surface roughness of microchannels. The aim of this process is to identify the influence of the individual and interactive effect of the process parameters on the surface roughness of the microchannels and to identify the optimum combination of the process parameters for minimum surface roughness. Taguchi’s L9 orthogonal array-based Design of Experiment (DoE) was implemented to conduct the experimental study. A statistical analysis of the results was performed for the experimental data. The results are presented in detail. %U https://www.sv-jme.eu/article/investigation-on-laser-ablative-micromachining-of-altib2-nanocomposite/ %0 Journal Article %R 10.5545/sv-jme.2022.306 %& 735 %P 11 %J Strojniški vestnik - Journal of Mechanical Engineering %V 68 %N 12 %@ 0039-2480 %8 2022-11-18 %7 2022-11-18
Manikandan Rajam, Pratheesh Kumar, & Jayakrishnan Nampoothiri. "Investigation of Laser Ablative Micromachining of Al/TiB2 Nanocomposite." Strojniški vestnik - Journal of Mechanical Engineering [Online], 68.12 (2022): 735-745. Web. 19 Apr. 2024
TY - JOUR AU - Manikandan Rajam, Pratheesh Kumar AU - Nampoothiri, Jayakrishnan PY - 2022 TI - Investigation of Laser Ablative Micromachining of Al/TiB2 Nanocomposite JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2022.306 KW - Laser micromachining; surface roughness; nanocomposite; parameter optimization; Taguchi methodology; Nd: YAG Laser; N2 - Laser beam machining (LBM) is used to machine a variety of materials economically and to obtain the required quality metrics. The quality of the surface finish of laser-machined components is affected by the improper selection of process parameters during machining. In this paper, microchannels were machined on Al/TiB2 nanocomposite using an Nd: YAG laser system. An atomic force microscope was used to obtain the surface roughness of microchannels. The aim of this process is to identify the influence of the individual and interactive effect of the process parameters on the surface roughness of the microchannels and to identify the optimum combination of the process parameters for minimum surface roughness. Taguchi’s L9 orthogonal array-based Design of Experiment (DoE) was implemented to conduct the experimental study. A statistical analysis of the results was performed for the experimental data. The results are presented in detail. UR - https://www.sv-jme.eu/article/investigation-on-laser-ablative-micromachining-of-altib2-nanocomposite/
@article{{sv-jme}{sv-jme.2022.306},
author = {Manikandan Rajam, P., Nampoothiri, J.},
title = {Investigation of Laser Ablative Micromachining of Al/TiB2 Nanocomposite},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {68},
number = {12},
year = {2022},
doi = {10.5545/sv-jme.2022.306},
url = {https://www.sv-jme.eu/article/investigation-on-laser-ablative-micromachining-of-altib2-nanocomposite/}
}
TY - JOUR AU - Manikandan Rajam, Pratheesh Kumar AU - Nampoothiri, Jayakrishnan PY - 2022/11/18 TI - Investigation of Laser Ablative Micromachining of Al/TiB2 Nanocomposite JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 68, No 12 (2022): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2022.306 KW - Laser micromachining, surface roughness, nanocomposite, parameter optimization, Taguchi methodology, Nd: YAG Laser, N2 - Laser beam machining (LBM) is used to machine a variety of materials economically and to obtain the required quality metrics. The quality of the surface finish of laser-machined components is affected by the improper selection of process parameters during machining. In this paper, microchannels were machined on Al/TiB2 nanocomposite using an Nd: YAG laser system. An atomic force microscope was used to obtain the surface roughness of microchannels. The aim of this process is to identify the influence of the individual and interactive effect of the process parameters on the surface roughness of the microchannels and to identify the optimum combination of the process parameters for minimum surface roughness. Taguchi’s L9 orthogonal array-based Design of Experiment (DoE) was implemented to conduct the experimental study. A statistical analysis of the results was performed for the experimental data. The results are presented in detail. UR - https://www.sv-jme.eu/article/investigation-on-laser-ablative-micromachining-of-altib2-nanocomposite/
Manikandan Rajam, Pratheesh Kumar, AND Nampoothiri, Jayakrishnan . "Investigation of Laser Ablative Micromachining of Al/TiB2 Nanocomposite" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 68 Number 12 (18 November 2022)
Strojniški vestnik - Journal of Mechanical Engineering 68(2022)12, 735-745
© The Authors 2022. CC BY 4.0 Int.
Laser beam machining (LBM) is used to machine a variety of materials economically and to obtain the required quality metrics. The quality of the surface finish of laser-machined components is affected by the improper selection of process parameters during machining. In this paper, microchannels were machined on Al/TiB2 nanocomposite using an Nd: YAG laser system. An atomic force microscope was used to obtain the surface roughness of microchannels. The aim of this process is to identify the influence of the individual and interactive effect of the process parameters on the surface roughness of the microchannels and to identify the optimum combination of the process parameters for minimum surface roughness. Taguchi’s L9 orthogonal array-based Design of Experiment (DoE) was implemented to conduct the experimental study. A statistical analysis of the results was performed for the experimental data. The results are presented in detail.