ÇOLAK, Oguz . Investigation on Machining Performance of Inconel 718 in High Pressure Cooling Conditions. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 58, n.11, p. 683-690, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/investigation-on-machining-performance-of-inconel-718-in-high-pressure-cooling-conditions/>. Date accessed: 07 oct. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2012.730.
Çolak, O. (2012). Investigation on Machining Performance of Inconel 718 in High Pressure Cooling Conditions. Strojniški vestnik - Journal of Mechanical Engineering, 58(11), 683-690. doi:http://dx.doi.org/10.5545/sv-jme.2012.730
@article{sv-jmesv-jme.2012.730, author = {Oguz Çolak}, title = {Investigation on Machining Performance of Inconel 718 in High Pressure Cooling Conditions}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {58}, number = {11}, year = {2012}, keywords = {High pressure assisted machining; ANOVA; Taguchi}, abstract = {The paper deals with the experimental investigation on machinability of Inconel 718 in conventional and various high pressure cooling conditions. The experiments designed based on Taguchi L18 orthogonal array at three different cutting speed, feed rate and pressure levels and two different depth of cuts. The cutting forces and tool flank wear were measured, while turning of Inconel 718 with (Ti,Al)N+TiN coated CNMG0812. In order to determine the importance of cutting parameters on tool flank wear and cutting forces, ANOVA (Analysis of variance) was employed. Moreover, with regression analysis, multi regression equation which indicating relation between tool flank wear, cutting forces and cutting parameters were obtained. The experiment results have proven that the tool flank wear and cutting forces considerably decrease with the use of high pressure coolant. ANOVA results also indicate that high pressure cooling has significant beneficial effect on tool flank wear.}, issn = {0039-2480}, pages = {683-690}, doi = {10.5545/sv-jme.2012.730}, url = {https://www.sv-jme.eu/article/investigation-on-machining-performance-of-inconel-718-in-high-pressure-cooling-conditions/} }
Çolak, O. 2012 June 58. Investigation on Machining Performance of Inconel 718 in High Pressure Cooling Conditions. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 58:11
%A Çolak, Oguz %D 2012 %T Investigation on Machining Performance of Inconel 718 in High Pressure Cooling Conditions %B 2012 %9 High pressure assisted machining; ANOVA; Taguchi %! Investigation on Machining Performance of Inconel 718 in High Pressure Cooling Conditions %K High pressure assisted machining; ANOVA; Taguchi %X The paper deals with the experimental investigation on machinability of Inconel 718 in conventional and various high pressure cooling conditions. The experiments designed based on Taguchi L18 orthogonal array at three different cutting speed, feed rate and pressure levels and two different depth of cuts. The cutting forces and tool flank wear were measured, while turning of Inconel 718 with (Ti,Al)N+TiN coated CNMG0812. In order to determine the importance of cutting parameters on tool flank wear and cutting forces, ANOVA (Analysis of variance) was employed. Moreover, with regression analysis, multi regression equation which indicating relation between tool flank wear, cutting forces and cutting parameters were obtained. The experiment results have proven that the tool flank wear and cutting forces considerably decrease with the use of high pressure coolant. ANOVA results also indicate that high pressure cooling has significant beneficial effect on tool flank wear. %U https://www.sv-jme.eu/article/investigation-on-machining-performance-of-inconel-718-in-high-pressure-cooling-conditions/ %0 Journal Article %R 10.5545/sv-jme.2012.730 %& 683 %P 8 %J Strojniški vestnik - Journal of Mechanical Engineering %V 58 %N 11 %@ 0039-2480 %8 2018-06-28 %7 2018-06-28
Çolak, Oguz. "Investigation on Machining Performance of Inconel 718 in High Pressure Cooling Conditions." Strojniški vestnik - Journal of Mechanical Engineering [Online], 58.11 (2012): 683-690. Web. 07 Oct. 2024
TY - JOUR AU - Çolak, Oguz PY - 2012 TI - Investigation on Machining Performance of Inconel 718 in High Pressure Cooling Conditions JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2012.730 KW - High pressure assisted machining; ANOVA; Taguchi N2 - The paper deals with the experimental investigation on machinability of Inconel 718 in conventional and various high pressure cooling conditions. The experiments designed based on Taguchi L18 orthogonal array at three different cutting speed, feed rate and pressure levels and two different depth of cuts. The cutting forces and tool flank wear were measured, while turning of Inconel 718 with (Ti,Al)N+TiN coated CNMG0812. In order to determine the importance of cutting parameters on tool flank wear and cutting forces, ANOVA (Analysis of variance) was employed. Moreover, with regression analysis, multi regression equation which indicating relation between tool flank wear, cutting forces and cutting parameters were obtained. The experiment results have proven that the tool flank wear and cutting forces considerably decrease with the use of high pressure coolant. ANOVA results also indicate that high pressure cooling has significant beneficial effect on tool flank wear. UR - https://www.sv-jme.eu/article/investigation-on-machining-performance-of-inconel-718-in-high-pressure-cooling-conditions/
@article{{sv-jme}{sv-jme.2012.730}, author = {Çolak, O.}, title = {Investigation on Machining Performance of Inconel 718 in High Pressure Cooling Conditions}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {58}, number = {11}, year = {2012}, doi = {10.5545/sv-jme.2012.730}, url = {https://www.sv-jme.eu/article/investigation-on-machining-performance-of-inconel-718-in-high-pressure-cooling-conditions/} }
TY - JOUR AU - Çolak, Oguz PY - 2018/06/28 TI - Investigation on Machining Performance of Inconel 718 in High Pressure Cooling Conditions JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 58, No 11 (2012): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2012.730 KW - High pressure assisted machining, ANOVA, Taguchi N2 - The paper deals with the experimental investigation on machinability of Inconel 718 in conventional and various high pressure cooling conditions. The experiments designed based on Taguchi L18 orthogonal array at three different cutting speed, feed rate and pressure levels and two different depth of cuts. The cutting forces and tool flank wear were measured, while turning of Inconel 718 with (Ti,Al)N+TiN coated CNMG0812. In order to determine the importance of cutting parameters on tool flank wear and cutting forces, ANOVA (Analysis of variance) was employed. Moreover, with regression analysis, multi regression equation which indicating relation between tool flank wear, cutting forces and cutting parameters were obtained. The experiment results have proven that the tool flank wear and cutting forces considerably decrease with the use of high pressure coolant. ANOVA results also indicate that high pressure cooling has significant beneficial effect on tool flank wear. UR - https://www.sv-jme.eu/article/investigation-on-machining-performance-of-inconel-718-in-high-pressure-cooling-conditions/
Çolak, Oguz"Investigation on Machining Performance of Inconel 718 in High Pressure Cooling Conditions" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 58 Number 11 (28 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 58(2012)11, 683-690
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
The paper deals with the experimental investigation on machinability of Inconel 718 in conventional and various high pressure cooling conditions. The experiments designed based on Taguchi L18 orthogonal array at three different cutting speed, feed rate and pressure levels and two different depth of cuts. The cutting forces and tool flank wear were measured, while turning of Inconel 718 with (Ti,Al)N+TiN coated CNMG0812. In order to determine the importance of cutting parameters on tool flank wear and cutting forces, ANOVA (Analysis of variance) was employed. Moreover, with regression analysis, multi regression equation which indicating relation between tool flank wear, cutting forces and cutting parameters were obtained. The experiment results have proven that the tool flank wear and cutting forces considerably decrease with the use of high pressure coolant. ANOVA results also indicate that high pressure cooling has significant beneficial effect on tool flank wear.