Investigation on the Depth of Slip Hanger Teeth Bite into Casing and the Mechanical Properties of Casing under Different Suspension Loads in Ultra-Deep Wells

955 Views
886 Downloads
Export citation: ABNT
CHEN, Yong ;TAN, Jinjin ;XIAO, Guoping .
Investigation on the Depth of Slip Hanger Teeth Bite into Casing and the Mechanical Properties of Casing under Different Suspension Loads in Ultra-Deep Wells. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 67, n.10, p. 516-524, october 2021. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/investigation-on-the-depth-of-slip-hanger-teeth-bite-into-casing-and-mechanical-properties-of-casing-under-different-suspension-load-of-the-slip-hanger/>. Date accessed: 29 mar. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2021.7251.
Chen, Y., Tan, J., & Xiao, G.
(2021).
Investigation on the Depth of Slip Hanger Teeth Bite into Casing and the Mechanical Properties of Casing under Different Suspension Loads in Ultra-Deep Wells.
Strojniški vestnik - Journal of Mechanical Engineering, 67(10), 516-524.
doi:http://dx.doi.org/10.5545/sv-jme.2021.7251
@article{sv-jmesv-jme.2021.7251,
	author = {Yong  Chen and Jinjin  Tan and Guoping  Xiao},
	title = {Investigation on the Depth of Slip Hanger Teeth Bite into Casing and the Mechanical Properties of Casing under Different Suspension Loads in Ultra-Deep Wells},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {67},
	number = {10},
	year = {2021},
	keywords = {WE-type slip hanger, suspension load, slip hanger bite depth, finite element simulation, casing},
	abstract = {There is great difficulty in controlling the setting load of the large-size slip casing hanger in the Northwest Oilfield in China, and a reasonable setting load is of great significance. This paper studied the relationship between slip hanger bite depth and suspension load in the Ф 273 mm WE-type slip hanger in the Northwest Oilfield in China through experiment, theoretical computation, and finite element analysis. The accuracy of the finite element model was proved by comparing the finite element simulation results with the experimental bite marks on the casing surface. The study results show that the bite mark of the slip insert in the casing is deeper in the lower part of the sitting position. When the hanging load increases from 1000 kN to 6000 kN, the maximum bite depth of the slips in the casing gradually increases with the suspension load. The residual collapse strength of the casing decreases correspondingly. When the residual collapse strength decreases to a certain value, the maximum suspension force corresponding to the bite depth of the slip insert can be obtained. Based on the finite element research results and theoretical equations, the stress distribution on the casing wall where the slips bite the deepest is obtained by derivation. The suggestions on improving the material structure of the casing under this stress were proposed. The limit of the setting load of the large-size casing wellhead for avoiding casing collapse was obtained, which is of great significance for guiding field-casing setting.},
	issn = {0039-2480},	pages = {516-524},	doi = {10.5545/sv-jme.2021.7251},
	url = {https://www.sv-jme.eu/article/investigation-on-the-depth-of-slip-hanger-teeth-bite-into-casing-and-mechanical-properties-of-casing-under-different-suspension-load-of-the-slip-hanger/}
}
Chen, Y.,Tan, J.,Xiao, G.
2021 October 67. Investigation on the Depth of Slip Hanger Teeth Bite into Casing and the Mechanical Properties of Casing under Different Suspension Loads in Ultra-Deep Wells. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 67:10
%A Chen, Yong 
%A Tan, Jinjin 
%A Xiao, Guoping 
%D 2021
%T Investigation on the Depth of Slip Hanger Teeth Bite into Casing and the Mechanical Properties of Casing under Different Suspension Loads in Ultra-Deep Wells
%B 2021
%9 WE-type slip hanger, suspension load, slip hanger bite depth, finite element simulation, casing
%! Investigation on the Depth of Slip Hanger Teeth Bite into Casing and the Mechanical Properties of Casing under Different Suspension Loads in Ultra-Deep Wells
%K WE-type slip hanger, suspension load, slip hanger bite depth, finite element simulation, casing
%X There is great difficulty in controlling the setting load of the large-size slip casing hanger in the Northwest Oilfield in China, and a reasonable setting load is of great significance. This paper studied the relationship between slip hanger bite depth and suspension load in the Ф 273 mm WE-type slip hanger in the Northwest Oilfield in China through experiment, theoretical computation, and finite element analysis. The accuracy of the finite element model was proved by comparing the finite element simulation results with the experimental bite marks on the casing surface. The study results show that the bite mark of the slip insert in the casing is deeper in the lower part of the sitting position. When the hanging load increases from 1000 kN to 6000 kN, the maximum bite depth of the slips in the casing gradually increases with the suspension load. The residual collapse strength of the casing decreases correspondingly. When the residual collapse strength decreases to a certain value, the maximum suspension force corresponding to the bite depth of the slip insert can be obtained. Based on the finite element research results and theoretical equations, the stress distribution on the casing wall where the slips bite the deepest is obtained by derivation. The suggestions on improving the material structure of the casing under this stress were proposed. The limit of the setting load of the large-size casing wellhead for avoiding casing collapse was obtained, which is of great significance for guiding field-casing setting.
%U https://www.sv-jme.eu/article/investigation-on-the-depth-of-slip-hanger-teeth-bite-into-casing-and-mechanical-properties-of-casing-under-different-suspension-load-of-the-slip-hanger/
%0 Journal Article
%R 10.5545/sv-jme.2021.7251
%& 516
%P 9
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 67
%N 10
%@ 0039-2480
%8 2021-10-22
%7 2021-10-22
Chen, Yong, Jinjin  Tan, & Guoping  Xiao.
"Investigation on the Depth of Slip Hanger Teeth Bite into Casing and the Mechanical Properties of Casing under Different Suspension Loads in Ultra-Deep Wells." Strojniški vestnik - Journal of Mechanical Engineering [Online], 67.10 (2021): 516-524. Web.  29 Mar. 2024
TY  - JOUR
AU  - Chen, Yong 
AU  - Tan, Jinjin 
AU  - Xiao, Guoping 
PY  - 2021
TI  - Investigation on the Depth of Slip Hanger Teeth Bite into Casing and the Mechanical Properties of Casing under Different Suspension Loads in Ultra-Deep Wells
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2021.7251
KW  - WE-type slip hanger, suspension load, slip hanger bite depth, finite element simulation, casing
N2  - There is great difficulty in controlling the setting load of the large-size slip casing hanger in the Northwest Oilfield in China, and a reasonable setting load is of great significance. This paper studied the relationship between slip hanger bite depth and suspension load in the Ф 273 mm WE-type slip hanger in the Northwest Oilfield in China through experiment, theoretical computation, and finite element analysis. The accuracy of the finite element model was proved by comparing the finite element simulation results with the experimental bite marks on the casing surface. The study results show that the bite mark of the slip insert in the casing is deeper in the lower part of the sitting position. When the hanging load increases from 1000 kN to 6000 kN, the maximum bite depth of the slips in the casing gradually increases with the suspension load. The residual collapse strength of the casing decreases correspondingly. When the residual collapse strength decreases to a certain value, the maximum suspension force corresponding to the bite depth of the slip insert can be obtained. Based on the finite element research results and theoretical equations, the stress distribution on the casing wall where the slips bite the deepest is obtained by derivation. The suggestions on improving the material structure of the casing under this stress were proposed. The limit of the setting load of the large-size casing wellhead for avoiding casing collapse was obtained, which is of great significance for guiding field-casing setting.
UR  - https://www.sv-jme.eu/article/investigation-on-the-depth-of-slip-hanger-teeth-bite-into-casing-and-mechanical-properties-of-casing-under-different-suspension-load-of-the-slip-hanger/
@article{{sv-jme}{sv-jme.2021.7251},
	author = {Chen, Y., Tan, J., Xiao, G.},
	title = {Investigation on the Depth of Slip Hanger Teeth Bite into Casing and the Mechanical Properties of Casing under Different Suspension Loads in Ultra-Deep Wells},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {67},
	number = {10},
	year = {2021},
	doi = {10.5545/sv-jme.2021.7251},
	url = {https://www.sv-jme.eu/article/investigation-on-the-depth-of-slip-hanger-teeth-bite-into-casing-and-mechanical-properties-of-casing-under-different-suspension-load-of-the-slip-hanger/}
}
TY  - JOUR
AU  - Chen, Yong 
AU  - Tan, Jinjin 
AU  - Xiao, Guoping 
PY  - 2021/10/22
TI  - Investigation on the Depth of Slip Hanger Teeth Bite into Casing and the Mechanical Properties of Casing under Different Suspension Loads in Ultra-Deep Wells
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 67, No 10 (2021): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2021.7251
KW  - WE-type slip hanger, suspension load, slip hanger bite depth, finite element simulation, casing
N2  - There is great difficulty in controlling the setting load of the large-size slip casing hanger in the Northwest Oilfield in China, and a reasonable setting load is of great significance. This paper studied the relationship between slip hanger bite depth and suspension load in the Ф 273 mm WE-type slip hanger in the Northwest Oilfield in China through experiment, theoretical computation, and finite element analysis. The accuracy of the finite element model was proved by comparing the finite element simulation results with the experimental bite marks on the casing surface. The study results show that the bite mark of the slip insert in the casing is deeper in the lower part of the sitting position. When the hanging load increases from 1000 kN to 6000 kN, the maximum bite depth of the slips in the casing gradually increases with the suspension load. The residual collapse strength of the casing decreases correspondingly. When the residual collapse strength decreases to a certain value, the maximum suspension force corresponding to the bite depth of the slip insert can be obtained. Based on the finite element research results and theoretical equations, the stress distribution on the casing wall where the slips bite the deepest is obtained by derivation. The suggestions on improving the material structure of the casing under this stress were proposed. The limit of the setting load of the large-size casing wellhead for avoiding casing collapse was obtained, which is of great significance for guiding field-casing setting.
UR  - https://www.sv-jme.eu/article/investigation-on-the-depth-of-slip-hanger-teeth-bite-into-casing-and-mechanical-properties-of-casing-under-different-suspension-load-of-the-slip-hanger/
Chen, Yong, Tan, Jinjin, AND Xiao, Guoping.
"Investigation on the Depth of Slip Hanger Teeth Bite into Casing and the Mechanical Properties of Casing under Different Suspension Loads in Ultra-Deep Wells" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 67 Number 10 (22 October 2021)

Authors

Affiliations

  • Southwest Petroleum University, School of Mechanical and Electrical Engineering, China 1

Paper's information

Strojniški vestnik - Journal of Mechanical Engineering 67(2021)10, 516-524
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.

https://doi.org/10.5545/sv-jme.2021.7251

There is great difficulty in controlling the setting load of the large-size slip casing hanger in the Northwest Oilfield in China, and a reasonable setting load is of great significance. This paper studied the relationship between slip hanger bite depth and suspension load in the Ф 273 mm WE-type slip hanger in the Northwest Oilfield in China through experiment, theoretical computation, and finite element analysis. The accuracy of the finite element model was proved by comparing the finite element simulation results with the experimental bite marks on the casing surface. The study results show that the bite mark of the slip insert in the casing is deeper in the lower part of the sitting position. When the hanging load increases from 1000 kN to 6000 kN, the maximum bite depth of the slips in the casing gradually increases with the suspension load. The residual collapse strength of the casing decreases correspondingly. When the residual collapse strength decreases to a certain value, the maximum suspension force corresponding to the bite depth of the slip insert can be obtained. Based on the finite element research results and theoretical equations, the stress distribution on the casing wall where the slips bite the deepest is obtained by derivation. The suggestions on improving the material structure of the casing under this stress were proposed. The limit of the setting load of the large-size casing wellhead for avoiding casing collapse was obtained, which is of great significance for guiding field-casing setting.

WE-type slip hanger, suspension load, slip hanger bite depth, finite element simulation, casing