DEVARAJU, Ayyannan ;ELAYAPERUMAL, Ayyasamy ;VENUGOPAL, Srinivasan ;KAILAS, Satish ;ALPHONSA, Joseph . Investigation on the High Vacuum Tribological Characteristics of Surface Treated Nuclear Grade Stainless Steel Type AISI 316 LN at 25 to 500 °C. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 57, n.12, p. 927-935, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/investigation-on-the-high-vacuum-tribological-characteristics-of-surface-treated-nuclear-grade-stainless-steel-type-aisi-316-ln-at-25-to-500-c/>. Date accessed: 07 oct. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2010.260.
Devaraju, A., Elayaperumal, A., Venugopal, S., Kailas, S., & Alphonsa, J. (2011). Investigation on the High Vacuum Tribological Characteristics of Surface Treated Nuclear Grade Stainless Steel Type AISI 316 LN at 25 to 500 °C. Strojniški vestnik - Journal of Mechanical Engineering, 57(12), 927-935. doi:http://dx.doi.org/10.5545/sv-jme.2010.260
@article{sv-jmesv-jme.2010.260, author = {Ayyannan Devaraju and Ayyasamy Elayaperumal and Srinivasan Venugopal and Satish Kailas and Joseph Alphonsa}, title = {Investigation on the High Vacuum Tribological Characteristics of Surface Treated Nuclear Grade Stainless Steel Type AISI 316 LN at 25 to 500 °C}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {57}, number = {12}, year = {2011}, keywords = {nuclear materials; surface treatment; PN layer; elevated temperature; high vacuum; tribological characteristics}, abstract = {Although some researchers have published friction and wear data of Plasma Nitride (PN) coatings, the tribological behavior of PN/PN Pairs in high vacuum environment has not been published so far. In order to bridge this knowledge gap, tribological tests under dry conditions have been conducted on PN/PN Pairs for varying temperatures of 25, 200, 400 and 500 °C in high vacuum (1.6×10-4 bar) environment. The PN coatings showed good wear resistance layer on the ring surface. The PN coatings were removed only from the pin surface for all the tests since it contacts at a point. The friction and wear were low at lower temperatures and it eliminated adhesion between the contact surfaces until the coating was completely removed from the pin surface.}, issn = {0039-2480}, pages = {927-935}, doi = {10.5545/sv-jme.2010.260}, url = {https://www.sv-jme.eu/article/investigation-on-the-high-vacuum-tribological-characteristics-of-surface-treated-nuclear-grade-stainless-steel-type-aisi-316-ln-at-25-to-500-c/} }
Devaraju, A.,Elayaperumal, A.,Venugopal, S.,Kailas, S.,Alphonsa, J. 2011 June 57. Investigation on the High Vacuum Tribological Characteristics of Surface Treated Nuclear Grade Stainless Steel Type AISI 316 LN at 25 to 500 °C. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 57:12
%A Devaraju, Ayyannan %A Elayaperumal, Ayyasamy %A Venugopal, Srinivasan %A Kailas, Satish %A Alphonsa, Joseph %D 2011 %T Investigation on the High Vacuum Tribological Characteristics of Surface Treated Nuclear Grade Stainless Steel Type AISI 316 LN at 25 to 500 °C %B 2011 %9 nuclear materials; surface treatment; PN layer; elevated temperature; high vacuum; tribological characteristics %! Investigation on the High Vacuum Tribological Characteristics of Surface Treated Nuclear Grade Stainless Steel Type AISI 316 LN at 25 to 500 °C %K nuclear materials; surface treatment; PN layer; elevated temperature; high vacuum; tribological characteristics %X Although some researchers have published friction and wear data of Plasma Nitride (PN) coatings, the tribological behavior of PN/PN Pairs in high vacuum environment has not been published so far. In order to bridge this knowledge gap, tribological tests under dry conditions have been conducted on PN/PN Pairs for varying temperatures of 25, 200, 400 and 500 °C in high vacuum (1.6×10-4 bar) environment. The PN coatings showed good wear resistance layer on the ring surface. The PN coatings were removed only from the pin surface for all the tests since it contacts at a point. The friction and wear were low at lower temperatures and it eliminated adhesion between the contact surfaces until the coating was completely removed from the pin surface. %U https://www.sv-jme.eu/article/investigation-on-the-high-vacuum-tribological-characteristics-of-surface-treated-nuclear-grade-stainless-steel-type-aisi-316-ln-at-25-to-500-c/ %0 Journal Article %R 10.5545/sv-jme.2010.260 %& 927 %P 9 %J Strojniški vestnik - Journal of Mechanical Engineering %V 57 %N 12 %@ 0039-2480 %8 2018-06-29 %7 2018-06-29
Devaraju, Ayyannan, Ayyasamy Elayaperumal, Srinivasan Venugopal, Satish Kailas, & Joseph Alphonsa. "Investigation on the High Vacuum Tribological Characteristics of Surface Treated Nuclear Grade Stainless Steel Type AISI 316 LN at 25 to 500 °C." Strojniški vestnik - Journal of Mechanical Engineering [Online], 57.12 (2011): 927-935. Web. 07 Oct. 2024
TY - JOUR AU - Devaraju, Ayyannan AU - Elayaperumal, Ayyasamy AU - Venugopal, Srinivasan AU - Kailas, Satish AU - Alphonsa, Joseph PY - 2011 TI - Investigation on the High Vacuum Tribological Characteristics of Surface Treated Nuclear Grade Stainless Steel Type AISI 316 LN at 25 to 500 °C JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2010.260 KW - nuclear materials; surface treatment; PN layer; elevated temperature; high vacuum; tribological characteristics N2 - Although some researchers have published friction and wear data of Plasma Nitride (PN) coatings, the tribological behavior of PN/PN Pairs in high vacuum environment has not been published so far. In order to bridge this knowledge gap, tribological tests under dry conditions have been conducted on PN/PN Pairs for varying temperatures of 25, 200, 400 and 500 °C in high vacuum (1.6×10-4 bar) environment. The PN coatings showed good wear resistance layer on the ring surface. The PN coatings were removed only from the pin surface for all the tests since it contacts at a point. The friction and wear were low at lower temperatures and it eliminated adhesion between the contact surfaces until the coating was completely removed from the pin surface. UR - https://www.sv-jme.eu/article/investigation-on-the-high-vacuum-tribological-characteristics-of-surface-treated-nuclear-grade-stainless-steel-type-aisi-316-ln-at-25-to-500-c/
@article{{sv-jme}{sv-jme.2010.260}, author = {Devaraju, A., Elayaperumal, A., Venugopal, S., Kailas, S., Alphonsa, J.}, title = {Investigation on the High Vacuum Tribological Characteristics of Surface Treated Nuclear Grade Stainless Steel Type AISI 316 LN at 25 to 500 °C}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {57}, number = {12}, year = {2011}, doi = {10.5545/sv-jme.2010.260}, url = {https://www.sv-jme.eu/article/investigation-on-the-high-vacuum-tribological-characteristics-of-surface-treated-nuclear-grade-stainless-steel-type-aisi-316-ln-at-25-to-500-c/} }
TY - JOUR AU - Devaraju, Ayyannan AU - Elayaperumal, Ayyasamy AU - Venugopal, Srinivasan AU - Kailas, Satish AU - Alphonsa, Joseph PY - 2018/06/29 TI - Investigation on the High Vacuum Tribological Characteristics of Surface Treated Nuclear Grade Stainless Steel Type AISI 316 LN at 25 to 500 °C JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 57, No 12 (2011): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2010.260 KW - nuclear materials, surface treatment, PN layer, elevated temperature, high vacuum, tribological characteristics N2 - Although some researchers have published friction and wear data of Plasma Nitride (PN) coatings, the tribological behavior of PN/PN Pairs in high vacuum environment has not been published so far. In order to bridge this knowledge gap, tribological tests under dry conditions have been conducted on PN/PN Pairs for varying temperatures of 25, 200, 400 and 500 °C in high vacuum (1.6×10-4 bar) environment. The PN coatings showed good wear resistance layer on the ring surface. The PN coatings were removed only from the pin surface for all the tests since it contacts at a point. The friction and wear were low at lower temperatures and it eliminated adhesion between the contact surfaces until the coating was completely removed from the pin surface. UR - https://www.sv-jme.eu/article/investigation-on-the-high-vacuum-tribological-characteristics-of-surface-treated-nuclear-grade-stainless-steel-type-aisi-316-ln-at-25-to-500-c/
Devaraju, Ayyannan, Elayaperumal, Ayyasamy, Venugopal, Srinivasan, Kailas, Satish, AND Alphonsa, Joseph. "Investigation on the High Vacuum Tribological Characteristics of Surface Treated Nuclear Grade Stainless Steel Type AISI 316 LN at 25 to 500 °C" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 57 Number 12 (29 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 57(2011)12, 927-935
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
Although some researchers have published friction and wear data of Plasma Nitride (PN) coatings, the tribological behavior of PN/PN Pairs in high vacuum environment has not been published so far. In order to bridge this knowledge gap, tribological tests under dry conditions have been conducted on PN/PN Pairs for varying temperatures of 25, 200, 400 and 500 °C in high vacuum (1.6×10-4 bar) environment. The PN coatings showed good wear resistance layer on the ring surface. The PN coatings were removed only from the pin surface for all the tests since it contacts at a point. The friction and wear were low at lower temperatures and it eliminated adhesion between the contact surfaces until the coating was completely removed from the pin surface.